Nanoscale surface modifications to control capillary flow characteristics in PMMA microfluidic devices

Polymethylmethacrylate (PMMA) microfluidic devices have been fabricated using a hot embossing technique to incorporate micro-pillar features on the bottom wall of the device which when combined with either a plasma treatment or the coating of a diamond-like carbon (DLC) film presents a range of surface modification profiles. Experimental results presented in detail the surface modifications in the form of distinct changes in the static water contact angle across a range from 44.3 to 81.2 when compared to pristine PMMA surfaces. Additionally, capillary flow of water (dyed to aid visualization) through the microfluidic devices was recorded and analyzed to provide comparison data between filling time of a microfluidic chamber and surface modification characteristics, including the effects of surface energy and surface roughness on the microfluidic flow. We have experimentally demonstrated that fluid flow and thus filling time for the microfluidic device was significantly faster for the device with surface modifications that resulted in a lower static contact angle, and also that the incorporation of micro-pillars into a fluidic device increases the filling time when compared to comparative devices.     

Fabrication of dense Ce0.9Mg0.1P2O7-PmOn composites by microwave heating for application as electrolyte in intermediate-temperature fuel cells

In the present work, we report a method of fabrication of dense 10 mol% Mg²⁺-doped cerium pyrophosphate-phosphate (Ce_0.9Mg_0.1P₂O₇-P_mO_n; CMP-P) composites by microwave heat-treatment of the preformed Ce_0.9Mg_0.1P₂O₇ substrates in the presence of phosphoric acid. The composite was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The microwave heating at 375 °C for 5 min resulted in the formation of dense CMP-P composites which retained most of the pyrophosphate phase. The electrical conductivity was extracted from the EIS data and for the CMP-P composite prepared by H₃PO₄ loading for 10 h and microwave heat-treatment for 5 min it was found to be >10^?2 S m^?1 in 100–250 °C range with a maximum of 0.062 S cm^?1 at 190 °C, which was significant for its application as electrolyte in intermediate temperature fuel cells.     

Identification of a potent inhibitor of human dual-specific phosphatase, VHR, from computer-aided and NMR-based screening to cellular effects

Human vaccinia H1-related phosphatase (VHR) is a dual-specific phosphatase (DSPs) that plays an important role in the mitogen-activated protein (MAP) kinase cascade regulation. It is also a potential drug target for diseases that are related to immune response. By combining a virtual and NMR-based ligand-screening strategy, we successfully identified four VHR inhibitors, of which GATPT ((glucosamine-aminoethoxy)triphenyltin) can bind to VHR with a K(i) value of 2.54 muM. The putative binding mode of GATPT was constructed by a molecular docking simulation to provide structural insights into the ligand-binding mechanism. Furthermore, we found that this compound can significantly inhibit the dephosphorylation of the extracellular regulated kinases (ERKs), and c-Jun N-terminal kinases (JNKs) and block the G(1)-S phase transition in the cell cycle. Therefore, GATPT is a promising lead structure for designing more effective inhibitors of VHR.     

A selective reaction of polyhydroxy fullerene with cycloaliphatic epoxy resin in designing ether connected epoxy star utilizing fullerene as a molecular core

A novel ether connected epoxy star like polymer was synthesized by selective reaction of water soluble polyhydroxy fullerene (fullerenol) with a commercial grade cycloaliphatic epoxy resin (CY-230, Ciba Geigy) in heterogeneous medium at ambient alkaline condition using tetrabutylammonium hydroxide as phase transfer catalyst. The reaction went well in such conditions and the hydroxy groups of fullerenol underwent selective nucleophilic addition reaction with polar carbonyl groups of the epoxy resin with the formation of a hemiketal. The progress of the reaction was monitored by FTIR analysis of the product formed. The disappearance of characteristic FTIR bands of fullerenol (at 1593.2, 1381.2, and 1068 cm⁻¹) and the typical carbonyl peak (at 1725 cm⁻¹) of parent epoxy resin and also changes of broad hydroxy peak (at 3431 cm⁻¹) of fullerenol into a sharp peak (at 3396.6 cm⁻¹, indicating reduced hydrophilicity) in the reaction product clearly demonstrated the chemical attachment of the epoxy units to the fullerene core. Multiple epoxy units (about 8-10) were attached to fullerene core. Non-reactivity of fullerenol towards DGEBA epoxy resin (LY 556 Ciba Geigy) in similar conditions further supports our result. The thermal properties of the product were influenced by the presence of fullerenol and exhibits higher thermal stability compared to parent epoxy. A probable reaction mechanism for the reaction has also been discussed.     

Epoxy‐montmorillonite clay nanocomposites: Synthesis and characterization

Nanocomposites of epoxy resin with montmorillonite clay were synthesized by swelling of different proportions of the clay in a diglycidyl ether of bisphenol‐A followed by in situ polymerization with aromatic diamine as a curing agent. The montmorillonite was modified with octadecylamine and made organophilic. The organoclay was found to be intercalated easily by incorporation of the epoxy precursor and the clay galleries were simultaneously expanded. However, Na‐montmorillonite clay could not be intercalated during the mixing or through the curing process. Curing temperature was found to provide a balance between the reaction rate of the epoxy precursor and the diffusion rate of the curing agent into the clay galleries. The cure kinetics were studied by differential scanning calorimetry. The exfoliation behavior of the organoclay system was investigated by X‐ray diffraction. Thermogravimetric analysis was used to determine the thermal stability, which was correlated with the ionic exchange between the organic species and the silicate layers. The morphology of the nanocomposites was evaluated by scanning electron microscopy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2201–2210, 2004     

Electrospun core–shell nanofibers for drug encapsulation and sustained release

Fabrication of core–shell nanofibers by coaxial electrospinning system suited for drug delivery applications was investigated based on tetracycline hydrochloride (TCH) as the core and poly(lactide‐co‐glycolide) as the shell materials. Comparison of drug release from monolithic fibers (blend electrospinning) and core–shell structures was performed to evaluate the efficacy of the core–shell morphology. The nanofibrous webs are potentially interesting for wound healing purposes since they can be maintained for an adequate length of time to gradually disinfect a local area without the need of bandage renewal. Further, our studies showed the potential of core–shell nanostructures for sustained drug release, which also suppressed the burst release effect from 62 to 44% in the first 3 hours by adding only 1 wt% TCH to the polymeric shell. POLYM. ENG. SCI., 2013. © 2013 Society of Plastics Engineers     

电流中断法在线测定直接甲醇燃料电池的欧姆阻抗

Electrochemical impedance spectroscopy (EIS) is widely used in fuel cell impedance analysis. However, for ohmic resistance (RΩ), EIS has some disadvantages such as long test period and complex data analysis with equivalent circuits. Therefore, the current interruption method is explored to measure the value of RΩ in direct methanol fuel cells (DMFC) at different temperatures and current densities. It is found that RΩ decreases as temperature increase, and decreases initially and then increases as current density increases. These results are consistent with those measured by the EIS technique. In most cases, the ohmic resistances with current interruption (RiR) are larger than those with EIS (REIS), but the difference is small, in the range from –0.848% to 5.337%. The errors of RiR at high current densities are less than those of REIS. Our results show that the RiR data are reliable and easy to obtain in the measurement of ohmic resistance in DMFC.     

Performance analysis of a solar photovoltaic operated domestic refrigerator

This paper describes the fabrication, experimentation and simulation stages of converting a 165 l domestic electric refrigerator to a solar powered one. A conventional domestic refrigerator was chosen for this purpose and was redesigned by adding battery bank, inverter and transformer, and powered by solar photovoltaic (SPV) panels. Various performance tests were carried out to study the performance of the system. The coefficient of performance (COP) was observed to decrease with time from morning to afternoon and a maximum COP of 2.102 was observed at 7 AM. Simulations regarding economic feasibility of the system for the climatic conditions of Jaipur city (India) were also carried out using RETScreen 4. It was observed that the system can only be economically viable with carbon trading option taken into account, and an initial subsidy or a reduction in the component costs – mainly SPV panels and battery bank.     

Vocal-tract modeling: fractional elongation of segment lengths in a waveguide model with half-sample delays

Digital waveguide models are commonly used for simulating vocal-tract acoustics based on physiological data. In particular, waveguide models with half-sample delays are known to be well suited for speech production research. This paper presents enhancements to such a model, aimed at improved accuracy in mapping physiological vocal-tract data (shape and length of the airway) to waveguide parameters. The enhancements allow the length of the vocal tract to be continuously varied, thus enabling more realistic synthesis. This is achieved by smoothly varying the individual segment lengths of a piecewise-cylindrical representation of the airway, without altering the system sampling frequency. Fractional-delay filters are used for spatial interpolation of the digital waveguide model. The algorithms are validated by modeling the protrusion of lips, lowering of larynx and lengthening of intermediate segments for a static vowel shape.