Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.     

降低精炼钢中氢氧含量的探索

主要介绍通过优化炼钢生产工艺,使产品满足新的技术要求:S≤0.010％,P≤0.015％.[H]≤0.0002％,[O]≤0.0045％,[N]≤0.0055％。     

鱼雷罐喷粉预处理过程水模研究

在鱼罐喷粉预处理水模实验数据的基础上，进一步利用线性回归确定各工艺操作参数对喷吹基本参数（均混时间、粉剂穿透比和粉剂停留时间）的影响，得出各传输动力学基本参数的函数关系式。     

ARTIFICIAL INTELLIGENCE CONTROL OF FOOD FREEZER USING ROTATING DISK AIR DISTRIBUTOR FOR UNIFORM FREEZING

A rotating disk air distribution (RDAD) system consisting of a rotating disk with an air supply hole was fabricated to solve the nonuniform freezing problem of a freezer that supplies air through a duct at a fixed location. The RDAD system was installed in a freezer to supply freezing air in various directions by controlling the position of the air supply hole. An equation estimating air velocity in the freezer was developed based on heat balance between a brass block thermocouple (BBT) probe and ambient air stream. The equation was applied to the analysis of airflow patterns developed through the RDAD and the fixed duct system. For control of the RDAD system, a fuzzy matrix was constructed with the measured nodal temperature at 3D locations in the freezer and used to search for the optimum direction of air supply. Uniform cooling was accomplished with the RDAD system using fuzzy and expert algorithms leading to temperature deviation σ=0.666, compared with 0.289 of the fixed air supply system. Cooling rate of model food (BBT) was 1.75 times faster than that of the fixed system.     

Treatment of perianal fistulas with ND:YAG laser--results in twenty cases

Excision of perianal fistulas using a 1.064 micron wavelength neodymium:yttrium aluminum garnet (ND:YAG) contact tipped laser with primary wound closure was used to treat 20 dogs with perianal fistulas. Overall, 19 of 20 (95%) dogs had resolution of fistulas after one or more ND:YAG treatments. The period of resolution ranged from 10 to 42 months with a mean of 22.9 months. Sixteen of 20 (80%) dogs had resolved fistulas after one laser excision. Three of the four recurrences underwent additional laser treatments with successful results. The total number of laser procedures ranged from one to three with a mean of 1.2 procedures. Postoperatively, anal tone as judged by digital rectal examination was reduced in about 60% of the cases, but clinical evidence of fecal incontinence only occurred in four of 20 cases. This was managed effectively with diet modification. The tendency toward loss of anal tone or fecal incontinence depended on the severity of preexisting anal stenosis. On a client survey, 19 of 20 owners believed that their animals experienced less pain during defecation after surgery and rated the results as excellent or good. The overall success rate using ND:YAG laser excision compared very favorably with previously reported studies of other methods of treatment for perianal fistulas in dogs.     

Synthesis and characterization of poly(siloxane-urethane)s

A series of polyurethane block copolymers based on hydroxy-terminated polydimethylsiloxane and poly(propylene glycol) soft segments of molecular weights 1818 and 2000, respectively, were synthesized. The hard segments consisted of 4,4′-diphenylnethane diisocyanate and 1,4-butanediol as the chain extender. Samples with different molar ratios were prepared. We tried to synthesize polydimethylsiloxane-based polyurethanes (PDMS-PU) containing a hard block as major fraction and a soft block as minor fraction for preparing toughened rigid systems. After a study of the pure polydimethylsiloxane-based polyurethane and poly(propylene glycol)-based polyurethane (PPG-PU), (mixed polyol)-based block copolymers and blends of PDMS-PU and PPG-PU were synthesized, and characterized by means of differential scanning calorimetry, tensile testing and scanning electron microscopy. In (mixed polyol)-based copolymers and lower hard-segment content blends, macro-phase separation occurred, but blends with higher hard-segment contents showed significant reduction in amounts of phase separation.     

Intraocular pressure fluctuations during scleral buckling surgery

PURPOSE: The purposes of this study are to measure real-time intraocular pressure (IOP) during scleral buckling and to determine the effects of elevated IOPs on ocular perfusion. PATIENTS AND METHODS: A standard 4-mm, 20-gauge infusion cannula was inserted through the pars plana, connected to a standard hemodynamic monitoring unit with an electronic pressure transducer, and calibrated. The authors measured real-time IOP in 20 eyes undergoing scleral buckling surgery for primary rhegmatogenous retinal detachments and determined the IOP required to close the central retinal artery. Pressure measurements were read from the monitor videoscreen intraoperatively and from a continuous paper tracing postoperatively. RESULTS: The patients ranged in age from 24 to 88 years (mean, 59.7 years). The highest IOP elevations occurred during scleral depression and cryopexy, ranging up to 210 mmHg (mean, 116 mmHg). Pressures at which the central retinal artery closed ranged from 48 to 110 mmHg (mean, 79.2 mmHg). Manipulations of the globes caused IOPs greater than the central retinal artery perfusion pressures in 13 of the 20 patients. The duration of pressures in excess of the central retinal artery perfusion pressure ranged from 6 to 402 seconds (mean, 118.8 seconds). There were no intraoperative or postoperative complications from the infusion cannula. CONCLUSIONS: Conventional scleral buckling surgery causes wide fluctuations in IOP and may impair ocular perfusion. Additional studies are needed to determine the long-term consequences of these pressure elevations.     

“镍”催化酰氯和有机锡试剂交叉偶联反应的研究

镍络合物催化酰氯与有机锡试剂交叉偶联合成有机酮的反应,其反应选择性强,反应彻底,转化率高,工艺简单。在有机锡过量的情况下,对不同催化剂的催化活性和包括投料比,反应温度,反应时间,反应溶剂等反应条件进行了考察。