Improvement in the Low Frequency Performance of Geometric Transition Radar Absorbers Using Square Loop Impedance Layers

A technique is described for improving the low frequency performance of geometric transition (GT) radar absorbers based on lossy foam pyramids. The technique makes use of the fact that at high frequencies, only the geometric transition region of the absorber is utilized whereas at low frequencies, the whole absorber thickness interacts with the incident wave. Hence the low frequency performance may be improved, without compromising that at high frequencies, by electrically loading the absorber base layer using one or more frequency selective surfaces (FSS) whose elements are typically in the form of single or nested loops. Other advantages of this technique include minimal increases in weight and manufacturing costs. The paper includes comparative predictions of unmodified and loaded GT absorber reflectivity at both normal and oblique incidence and discusses the effect on absorber performance of tolerance variations in the dimensions and location of the loading FSS elements. Finally, free-space reflectivity measurements on unmodified and loaded commercial absorber blocks are made over the frequency range 1-10 GHz and these confirm the validity of the technique.     

Efficiency Enhancement of Single‐Walled Carbon Nanotube‐Silicon Heterojunction Solar Cells Using Microwave‐Exfoliated Few‐Layer Black Phosphorus

Carbon nanotube‐silicon (CNT‐Si)‐based heterojunction solar cells (HJSCs) are a promising photovoltaic (PV) system. Herein, few‐layer black phosphorus (FL‐BP) sheets are produced in N‐methyl‐2‐pyrrolidone (NMP) using microwave‐assisted liquid‐phase exfoliation and introduced into the CNTs‐Si‐based HJSCs for the first time. The NMP‐based FL‐BP sheets remain stable after mixing with aqueous CNT dispersion for device fabrication. Due to their unique 2D structure and p‐type dominated conduction, the FL‐BP/NMP incorporated CNT‐Si devices show an impressive improvement in the power conversion efficiency from 7.52% (control CNT‐Si cell) to 9.37%. Our density‐functional theory calculation reveals that lowest unoccupied molecular orbital (LUMO) of FL‐BP is higher in energy than that of single‐walled CNT. Therefore, we observed a reduction in the orbitals localized on FL‐BP upon highest occupied molecular orbital to LUMO transition, which corresponds to an improved charge transport. This study opens a new avenue in utilizing 2D phosphorene nanosheets for next‐generation PVs.     

Parametric Wavelength Conversion From Conventional Near-Infrared to Visible Band

The feasibility of distant wavelength conversion in photonic crystal fiber was explored. The one-pump parametric architecture was used to demonstrate translation from the conventional (1550 nm) to visible (500 nm) band. Experimental results are reported, which demonstrate the conventional-to-visible conversion of single- and multiple-channel signals encoded in the nonreturn-to-zero format     

Improved All‐Polymer Solar Cell Performance by Using Matched Polymer Acceptor

By the introduction of different building blocks and side‐chains, a series of donor–acceptor type polymer acceptors containing naphthalene diimide have been successfully prepared. The theoretical and experimental results show that the molecular design effectively tunes the energy levels, solubility, and coplanarity of the acceptor polymers. The intermolecular packing, which has been considered as a key factor in the bulk heterojunction morphology, has been adjusted by changing the coplanarity. As a result of improved morphology and fine‐tuned energy levels, a power conversion efficiency of 6.0% has been demonstrated for the optimized devices, which is among the highest‐efficiencies for reported all‐polymer solar cells. The improved device performance may be attributed to the resemble crystallinity of the donor/acceptor polymers, which can lead to the optimal phase separation morphology balancing both charge transfer and transport.     

Fullerene Additives Convert Ambipolar Transport to p‐Type Transport while Improving the Operational Stability of Organic Thin Film Transistors

Many high charge carrier mobility (μ) active layers within organic field‐effect transistor (OFET) configurations exhibit non‐linear current–voltage characteristics that may drift with time under applied bias and, when applying conventional equations for ideal FETs, may give inconsistent μ values. This study demonstrates that the introduction of electron deficient fullerene acceptors into thin films comprised of the high‐mobility semiconducting polymer PCDTPT suppresses an undesirable “double‐slope” in the current–voltage characteristics, improves operational stability, and changes ambipolar transport to unipolar transport. Examination of other high μ polymers shows general applicability. This study also shows that one can further reduce instability by tuning the relative electron affinity of the polymer and fullerene by creating blends containing different fullerene derivatives and semiconductor polymers. One can obtain hole μ values up to 5.6 cm² V^–1 s^–1 that are remarkably stable over multiple bias‐sweeping cycles. The results provide a simple, solution‐processable route to dictate transport properties and improve semiconductor durability in systems that display similar non‐idealities.     

明年半导体销售额仅会温和增长

据iSuppli公司,由于全经济和电子市场继续复苏,尽管2011年半导体产业不会再现今年预期中的强劲表现,但将继续增长.2011年全球半导体销售额将达到3174亿美元,比今年预期的3020亿美元温和增长5.1%.     

Mechanical strength of acrylic bone cements impregnated with antibiotics

Admixing of several antibiotic powders which were insoluble in methyl methacrylate did not decrease the compressive and diametral tensile strengths of two acrylic bone cements when tested after setting for 1 day and after leaching 40 days in water at 37 degrees C. When antibiotics were added as water solutions, the included water resulted in a significant decrease in these bulk mechanical properties. Storage in water for 40 days caused surface irregularities only on specimens of the set antibiotic admixtures. Approximately 0.5% of the admixed dosage of these water-soluble antibiotics could be leached from the set cements. The observed surface channels, presumably left by the loss of antibiotic, suggest further study of surface-sensitive mechanical properties may be needed. The bulk mechanical strengths presented here are conclusive only for the particular combinations of antibiotics and cements investigated, and should not be generalized at this time to any or all antibiotic admixtures or other mechanical properties.     

Conversion of proparathyroid hormone to parathyroid hormone: studies in vitro with trypsin

The conversion of proparathyroid hormone to parathyroid hormone (PTH) was studied in vitro employing pancreatic trypsin as a prototype converting enzyme. Digestion of intact radiolabeled bovine prohormone with trypsin (0.1%) (w/w) resulted in release of a peptide comigrating with intact hormone marker in systems resolving both on the basis of charge (urea polyacrylamide gels, pH 4.4) and size (sodium dodecyl sulfate-urea polyacrylamide gels, pH 7.2). Tryptic digestions of a synthetic analogue of bovine prohormone, ProPTH-(-6 + 34), consisting of the prohormone hexapeptide covalently bonded to the NIH2 terminus of the active fragment of the hormone, released in high yield the hexapeptide and the intact active hormone fragment before any other smaller fragments. Analyses of digestions were by: (i) thin-layer chromatography and amino acid analysis of digestion products; (ii) comparison of the biological activity of the prophormone substrate and the products of digestion; and (iii) peptide end-group analysis by the Edman method during progressive tryptic hydrolysis over 22 h. The latter experiments demonstrated cleavage of more than 75% of the hexapeptide-hormone peptide bond before cleavage of other trypsin-sensitive sites within the molecule. It is concluded that the specificity of cleavage at the hexapeptide-hormone bond in the process of intracellular hydrolysis of proparathyroid hormone resides primarily in the sequence and/or conformation of the precursor molecule; inasmuch as conversion of prohormone to hormone can be efficiently accomplished by pancreatic trypsin in vitro, there is, therefore, no need to postulate the existence of an intracellular converting enzyme within the parathyroid cell that possesses unique hydrolytic specificity.     

Freezing temperature of finger skin

In 45 subjects, 154 frostnips of the finger were induced by cooling in air at -15 degrees C with various wind speeds. The mean supercooled skin temperature at which frostnip appeared was -9.4 degrees C. The mean skin temperature rise due to heat of fusion at ice crystallization was 5.3 degrees C. The skin temperature rose to what was termed the apparent freezing point. The relation of this point to the supercooled skin temperature was analyzed for the three wind speeds used. An apparent freezing point for a condition of no supercooling was calculated, estimating the highest temperature at which skin freezes at a given wind speed. The validity of the obtained differences in apparent freezing point was tested by an analysis of covariance. Although not statistically significant, the data suggest that the apparent freezing point with no supercooling decreases with increasing wind velocity. The highest calculated apparent freezing point at -15 degrees C and 6.8 m/s was 1.2 degrees C lower than the true freezing point for skin previously determined in brine, which is a statistically significant difference.     

An educational strategy for occupational therapy community service

In response to the increasing trend toward community health care, a model of training that prepares students for community practice was incorporated into the occupational therapy curriculum at the University of Southern California. During academic training students are placed in a part-time community assignment where no occupational therapy services are offered. Training students for the role of community health specialist produces a dilemma for curriculum design. A balance must be achieved between providing traditional clinical content and providing the knowledge and expertise necessary for community practice. However, this training is considered necessary for maintaining the viability of the profession in a changing health system. Significantly, during the four-year period using this model, many graduates have sought employment in "nontraditional" community roles.