Characterization of products from fast and isothermal hydrothermal liquefaction of microalgae

We investigated nonisothermal (fast) and nominally isothermal hydrothermal liquefaction (HTL) of Nannochloropsis sp. microalgae for the production of biocrude. Biocrude yields ranged from 36 to 45 wt % (dry weight), with fast HTL with low mass loading giving the highest yield. This condition also gave the biocrude with the lowest heating value, which indicates there are compromises to be made between biocrude quantity and quality. The aqueous phase and biocrude product fractions were characterized using elemental analysis and Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR MS). This detailed level of analysis identified more than 30,000 unique molecular products. The aqueous phase products included compounds with the same molecular formulae as known herbicides, which may inform efforts in genetic engineering of algae and/or bacteria for cultivation on the aqueous phase. This detailed molecular‐level characterization provides some clues regarding the types of reactions that may take place during HTL. © 2016 American Institute of Chemical Engineers AIChE J, 62: 815–828, 2016     

Cuticular lipids of insects: V. Cuticular wax esters of secondary alcohols from the grasshoppersMelanoplus packardii andMelanoplus sanguinipes

Wax esters of secondary alcohols constitute 18–20% of the cuticular lipid extract ofMelanoplus packardii and 26–31% of the cuticular lipids ofMelanoplus sanguinipes. The total number of carbons in the wax esters range from 37–54 with 41 predominating in both species. The fatty acids ofM. packardii wax esters are 16∶0, 18∶0, 14∶0, 20∶0 and 12∶0 in decreasing quantity. The fatty acids ofM. sanguinipes wax esters are 18∶0, 20∶0, 16∶0 22∶0, 14∶0, 19∶0 and 17∶0 in decreasing quantity. The secondary alcohols from the wax esters ofM. packardii are C₂₅, C₂₃ and C₂₇ in decreasing quantity, and the secondary alcohols of theM. sanguinipes are C₂₃, C₂₅, C₂₁, C₂₇, C₂₄, C₂₂ and C₂₆ in decreasing quantity. Each secondary alcohol consists of two to four isomers with the hydroxyl group located near the center of the chain. Montana Agriculture Experiment Station, Journal Series No. 332.     

Analysis of subcellular phosphatidyl choline in developing rabbit lung

Phosphatidyl choline is a major lung surfactant. Insufficient development of the surfactant in neonates is often associated with the Respiratory Distress Syndrome. The concentration and fatty acid composition of phosphatidyl choline have not been studied in the subcellular organelles of the developing lung. This study has investigated the development of the concentration and fatty acid composition of phosphatidyl choline in subcellular fractions of 28-day and 30-day fetal and maternal New Zealand rabbit lungs. The concentration of total phospholipids in lamellar bodies increased four to five fold from 28-day fetus to 30-day fetus which, in turn, was similar to the maternal level. Total phospholipid content increased only about 50% in mitochondria and microsomes. The percentage of phosphatidyl choline among total phospholipids in lamellar bodies increased successively from 60% at 28 days gestation to 84% at 30 days gestation and leveled at 84% in maternal lamellar bodies. Microsomal PC increased steadily from 52% in the 28-day fetus to 65% in the adult. Analysis of the fatty acid composition of phosphatidyl choline in lamellar bodies confirmed 16∶0 as the major fatty acid, and its content remained constant from 28 days gestation to adult. In contrast, the content of 16∶0 of the microsomal phosphatidyl choline decreased with increasing gestation. Changes of several unsaturated fatty acid components were observed in both lamellar bodies and microsomes in the developing lungs. Maturational development of phosphatidyl choline is reflected in an increase in the concentration of this surfactant, particularly in lamellar bodies, and possibly in remodeling of fatty acid composition in both lamellar bodies and microsomes.     

Genotype and Growing Environment Effects on the Tocopherols and Fatty Acids of <Emphasis Type="Italic">Brassica napus</Emphasis> and <Emphasis Type="Italic">B. juncea</Emphasis>

The effects of genotype and growing environment on the tocopherols and fatty acids (FA) of experimental Brassica juncea and B. napus breeding lines were investigated. For both species, with the exception of a few genotypes, the concentration ratio of γ-tocopherols to α-tocopherol was practically constant. The genotype influenced the tocopherol concentration in B. napus, and to a lesser degree, B. juncea. The environment also had a similar effect, and a positive correlation existed between the daily maximum temperature and the α-tocopherol concentration in B. napus. Genotype effects on the FA composition were significant for the conventional but not for Clearfield or triazine tolerant traits of B. napus. The genotype had no effect on the FA of the B. juncea genotypes. In contrast, the growing environment had a significant influence on the FA composition of both species with apparent influence from temperature and rainfall. For both species, the concentration of γ-tocopherol as well as total tocopherols was inversely related to the 18:3 concentration, which could have resulted from opposite and independent effects of temperature on the two variables. No relationship existed between the concentrations of tocopherol and the remaining unsaturated FA 18:1 and 18:2. The positional distribution of unsaturated FA within the oil triacylglycerol was a function of their total concentration.     

Low Temperature Water–Gas Shift/Methanol Steam Reforming: Alkali Doping to Facilitate the Scission of Formate and Methoxy C–H Bonds over Pt/ceria Catalyst

Doping Pt/ceria catalysts with the Group 1 alkali metals was found to lead to an important weakening of the C–H bond of formate and methoxy species. This was demonstrated by a shift to lower wavenumbers of the formate and methoxy ν(CH) vibrational modes by DRIFTS spectroscopy. Li and Na-doped Pt/ceria catalysts were tested relative to the undoped catalyst for low temperature water–gas shift and methanol steam reforming using a fixed bed reactor and exhibited higher catalytic activity. Steaming of formate and methoxy species pre-adsorbed on the catalyst surface during in-situ DRIFTS spectroscopy suggested that the species were more reactive for dehydrogenation steps in the catalytic cycle for the Li and Na-doped catalysts relative to undoped Pt/ceria. However, with increasing atomic number over the series of alkali-doped catalysts, the stability of a fraction of the carbonate species was found to increase. This was observed during TPD-MS measurements of the adsorbed CO₂ probe molecule by a systematic increase of a high temperature peak for a fraction of the CO₂ desorbed. This result indicates that alkali-doping is an optimization problem—that is, while improving the dehydrogenation rates of methoxy and formate species, the carbonate intermediate stability increases, making it difficult to liberate the CO₂. Infrared spectroscopy results of CO adsorbed on Pt and ceria suggest that the alkali dopant is located on, and electronically modifies, both the Pt and ceria components. The results not only lend further support to the role that methoxy and formate species play as intermediates in the catalytic mechanisms, but also provide a path forward for improving rates by means other than resorting to higher noble metal loadings.     

Automated fixture configuration using projective geometry approach

The geometric and topological specification of a workpiece boundary is usually represented in a specific data format in a CAD database. To retrieve a set of workpiece data, to analyse its shape in addition to the machining requirements, and to determine the proper fixture configuration accordingly, are not trivial tasks when a part has a complicated shape. The real challenge is to recognise and synthesise the shape of a workpiece from its data representation. Consequently, the decision for fixturing can be made when the shape of a workpiece and the relationship of the shape and the fixturing configuration can be derived by a systematic methodology. In this paper, a projective spatial occupancy enumeration (PSOE) approach is applied as a representational and manipulating scheme for developing algorithms in automatic fixture configuration. The workpiece is projected onto the working plane of the fixture baseplate. A 2D projection is defined as a matrix of cells which can represent a workpiece with an arbitrary shape. Using a discrete search based upon the matrix of cells, the fixture types and their locations are generated according to a set of heuristic algorithms. This work is a generalisation and extension of previous works for prismatic parts. The same methodology is equally applicable in general robot grasping.     

Comparison of Different Mass Spectrometry Workflows for the Proteomic Analysis of Tear Fluid

The tear film is a multi-layer fluid that covers the corneal and conjunctival epithelia of the eye and provides lubrication, nutrients, and protection from the outside environment. Tear fluid contains a high concentration of proteins and has thus been recognized as a potential source of biomarkers for ocular disorders due to its proximity to disease sites on the ocular surface and the non-invasive nature of its collection. This is particularly true in the case of dry eye disease, which directly impacts the tear film and its components. Proteomic analysis of tear fluid is challenging mainly due to the wide dynamic range of proteins and the small sample volumes. However, recent advancements in mass spectrometry have revolutionized the field of proteomics enabling unprecedented depth, speed, and accuracy, even with small sample volumes. In this study using the Orbitrap Fusion Tribrid mass spectrometer, we compared four different mass spectrometry workflows for the proteomic analysis of tear fluid collected via Schirmer strips. We were able to establish a method of in-strip protein digestion that identified >3000 proteins in human tear samples from 11 healthy subjects. Our method offers a significant improvement in the number of proteins identified compared to previously reported methods without pooling samples.     

NXP单芯片方案再掀低成本手机浪潮

恩智浦半导体(NXP Semiconductors)推出面向"超低成本(ULC)"手机细分市场的Nexperia PNX4903 GSM/GPRS优化多媒体解决方案.PNX4903在一个单片集成电路上实现系统级的完全操作,提供高集成度和性能,使手机OEM/ODM能够在一个可靠、低成本、低能耗的整体方案中为入门级手机用户提供丰富的多媒体内容.     

Solution Structure of the Leader Sequence of the Patellamide Precursor Peptide,PatE1–34

The solution structure of the leader sequence of the patellamide precursor peptide was analysed by using CD and determined with NOE‐restrained molecular dynamics calculations. This leader sequence is highly conserved in the precursor peptides of some other cyanobactins harbouring heterocycles, and is assumed to play a role in targeting the precursor peptide to the post‐translational machinery. The sequence was observed to form an α‐helix spanning residues 13–28 with a hydrophobic surface on one side of the helix. This hydrophobic surface is proposed to be the site of the initial binding with modifying enzymes.     

Veteran interest in family involvement in PTSD treatment.

[Correction Notice: An erratum for this article was reported in Vol 7(3) of Psychological Services (see record 2010-17074-004). The copyright for the article was listed incorrectly. This article is in the Public Domain. The online version has been corrected.] The present study examined interest in family involvement in treatment and preferences concerning the focus of family oriented treatment for veterans (N = 114) participating in an outpatient Veterans Affairs outpatient posttraumatic stress disorder (PTSD) program. Most veterans viewed PTSD as a source of family stress (86%) and expressed interest in greater family involvement in their treatment (79%). These results suggest the need to consider increasing family participation in the clinical care of individuals with PTSD and to develop specialized family educational and support services for this population. (PsycINFO Database Record (c) 2010 APA, all rights reserved)