等径角挤压法制备超细晶的研究现状

总结了等径角挤压(Equal Channel Angular Pressing，ECAP)过程中的影响因素、晶粒细化的机理等方面的研究进展，讨论了挤压温度、挤压速度在ECAP过程中对材料的影响，简述了ECAP的变形途径、变形次数对材料晶粒、材料变形量的影响。论述了由等径角挤压方法制备超细晶材料的发展现状并提出了一些需要进一步深入研究的方面。     

氧气喷头的热挤压工艺及模具设计

在设备吨位和闭合高度有限的情况下，设计结构新颖的组合成挤压模具，使315t油压机设备能力得到了有效的发挥；本文所述氧气喷头毛坯生产工艺，具有节材优质高效的特点；对类似零部件挤压工艺及模具结构设计具有重要的参考价值。     

转炉炼钢氧枪枪位自动控制专家系统的实验室研究

在转炉造渣过程中，渣中FeO的含量直接影响到石灰的溶解速度、造渣途径和炉渣的喷溅、返干，在泡沫渣淹没吹炼状态下，调整氧枪枪位可有效地控制渣中FeO的含量。音平控渣系统，可以给出喷溅、返干的趋势，在此基础上，开发氧枪枪位自动控制专家系统，对喷溅、返干进行预测，采用自学习技术给出枪拉操作提示。此系统为氧枪自动控制奠定了基础。     

熔体过热对Ag-Cu合金生长取向的影响

通过对Ag-Cu合金熔体的过热处理，研究了不同生长速率时的平界面的结晶位向，发现高的熔体温度使平面单晶的位向产生分支现象。应用Leonard-Jones势能和团簇概念分析了位向分支的形成原因，表明团簇状态在母相中的分布对结晶取向具有重要作用。     

机械合金化Al-Cu-Fe准晶相形成的研究进展

综述了机械合金化A1-Cu-Fe准晶相的形成机理及热力学稳定性方面的研究进展.     

旋具杆部镀铬与头部发黑的复合处理

研制了旋具杆部镀铬与头部发黑的复合处理工艺。确定了镀层组合与发黑前酸洗用酸的种类,以及发黑端电镀时的保护方法;介绍了镀液、煮黑溶液的工艺参数,以及溶液的配制方法。工艺应用效果良好,并能满足工业上大批量生产要求。     

一流大学办学理念的基本特征及其形成条件

思想指导行动 ,即理念指导实践。一流的办学理念是一流大学办学成功的关键。以美国和英国为首的发达国家的世界一流大学的办学理念具有许多共同特征 ,即伦理本位、学术自由、使命指引、传承创新。基于此内涵特点的大学办学理念之形成条件主要有这样几个共性特征 ,即杰出校长的教育理念是关键、著名专家学者的贡献是基础、社会文化环境的影响是背景、国内外高水平交往是条件、大学享有自由权利是根本。     

The oxidation of nanocrystalline Ni3Al fabricated by mechanical alloying and spark plasma sintering

Nanocrystalline Ni₃Al was fabricated through mechanical alloying of elemental powders and spark plasma sintering. The nanocrystalline Ni₃Al has a nearly full density after being sintered at 1223 K for 10 min under a pressure of 65 MPa. Isothermal and cyclic oxidations of nanocrystalline Ni₃Al were tested at 1173–1373 K with intervals of 100 K. The results indicate that nanocrystalline Ni₃Al exhibits excellent isothermal and cyclical oxidation resistance. The oxide scales consist primarily of dense and continuous -Al₂O₃. The grain refinement is beneficial for improving the oxidation resistance of Ni₃Al by providing more nucleation centers for the Al₂O₃ formation, promoting the selective formation of Al₂O₃ and improving the adhesion of oxide scales to the matrix.     

淬火态TC4合金热循环硬化行为及断口特征

在７７－６２３Ｋ对淬火态ＴＣ４合金进行了热循环试验，测定了合金热循环后的硬度，并与６２３Ｋ时效合金的硬度进行了对比；还观察了拉伸试样断口形貌。结果表明：热应力能加速亚稳相的分解，使合金中的位错密度升高，层错和形变孪晶的数量增多；循环温度场作用下淬火态合金拉伸试样断口由韧窝型断裂向韧窝和撕裂棱混合型断裂转变。     

Performance of positive and negative electrodes in amorphous manganese oxide supercapacitor

Using potassium permanganate and acetic manganese as the reactants, amorphous manganese oxide was prepared with mechanochemical method. XRD was used for microstructure characterization, while cyclic voltammetry and constant current charge-discharge were used for electrochemical performance testing. The positive electrode （PE） and negative electrode （NE） were investigated respectively in amorphous manganese oxide supercapacitor, aiming to find their different performances in charging-discharging. The results show that the crystalline structure is destroyed in both the PE and NE material during charge-discharge process. Thereinto, the NE suffers a bit more seriously. When cycling, the PE potential scope diminishes while the NE potential scope enlarges. The increased inner resistance makes the NE curves almost bended to be a right angle, but not the PE curves. The cell＇s equivalent series resistance （ESR） is more dependent on the NE, and the capacitance is mainly determined by the rapid descent of the NE potential range. The capacitances of the NE are highly rate-dependent, decreasing from 121.3 to 53.1 F/g, by 56.2%, over the range of 5-25 mV/s. However, the PE appears to be weakly dependent and its capacitance is only dropped by 22.1%.