Comparative study of (Ba,Sr)TiO3 films prepared by electron cyclotron resonance plasma sputtering and metal-organic decomposition

(Ba,Sr)TiO₃ films were prepared on Pt/Ti/SiO₂/Si substrates by mirror-confinement-type electron cyclotron resonance (ECR) plasma sputtering as well as by metal-organic decomposition (MOD). The films prepared by ECR plasma sputtering were crystallized at lower temperatures with better crystallinity and a denser structure than those by MOD. As for dielectric constant, films prepared by ECR plasma sputtering exhibited a relatively high value over 500 at a low annealing temperature of 873 K, whereas films by MOD exhibited approximately 350. This is attributed to the better crystallinity and the denser structure of the films by ECR plasma sputtering. The leakage current density of the films was found to be similar in both processes.     

Low-noise magnetic force microscopy with high resolution by tip cooling

Low-noise magnetic force microscopy (MFM) was realized by using a conventional high-vacuum MFM with homemade tip-cooling equipment. The noise level of the MFM at a tip temperature of 130 K was estimated at /spl mu/N/m order. High spatial resolution of 10 nm was obtained for observing high-density recording media with recording density of 1000 kfci. The improvement of resolution by tip cooling was a result of the reduction of thermodynamic noise of a cantilever and the effective reduction of tip-sample distance due to the magnetic hardening of a tip.     

Appearance-based virtual view generation from multicamera videos captured in the 3-D room

We present an appearance-based virtual view generation method that allows viewers to fly through a real dynamic scene. The scene is captured by multiple synchronized cameras. Arbitrary views are generated by interpolating two original camera-views near the given viewpoint. The quality of the generated synthetic view is determined by the precision, consistency and density of correspondences between the two images. All or most of previous work that uses interpolation extracts the correspondences from these two images. However, not only is it difficult to do so reliably (the task requires a good stereo algorithm), but also the two images alone sometimes do not have enough information, due to problems such as occlusion. Instead, we take advantage of the fact that we have many views, from which we can extract much more reliable and comprehensive 3D geometry of the scene as a 3D model. Dense and precise correspondences between the two images, to be used for interpolation, are obtained using this constructed 3D model.     

Investigations on welding residual stresses in penetration nozzles by means of 3D thermal elastic plastic FEM and experiment

Recent discoveries of stress corrosion cracking (SCC) in weldments including penetration nozzles at pressurized water reactors (PWRs) and boiling water reactors (BWRs) have raised concerns about safety and integrity of plant components. It is well known that welding residual stress is an important factor resulting in SCC in weldments. In the present work, both experimental method and numerical simulation technology are used to investigate the characteristics of welding residual stress distribution in penetration nozzles welded by multi-pass J-groove joint. An experimental mock-up is fabricated to measure welding residual stress at first. In the experiment, each weld pass is performed using a semi-circle balanced welding procedure. Then, a corresponding finite element models with considering moving heat source, deposition sequence, inter-pass temperature, temperature-dependent thermal and mechanical properties, strain hardening and annealing effect is developed to simulate welding temperature and residual stress fields. The simulation results predicted by the 3D model are generally in good agreement with the measurements. Meanwhile, to clarify the influence of deposition sequence on the welding residual stress, the welding residual stress field in the same geometrical model induced by a continuous welding procedure is also calculated. Finally, the influence of a joint oblique angle on welding residual stress is investigated numerically. The numerical results suggest that both deposition sequence and oblique angles have effect on welding residual stress distribution.     

Damage evolution behavior of CFRP laminates under post-impact fatigue with water absorption environment

In this study, the damage evolution behavior was evaluated considering the effect of the textile structure and water absorption. Damage observation was conducted by the integration of non-destructive and direct observation methods. Candidate textile reinforcements were T300-3k plain woven fabric (PW) and T700S-12k multi-axial knitted fabric (MA). The effect of water absorption on the performances of compression after impact (CAI) and PIF were small in PW CFRP laminates. Conversely, PIF properties of water-absorbed MA CFRP laminates drastically decreased than that of dry ones. CAI strength was not affected by water absorption. PIF performance of dry MA CFRP was fairly higher than that of the others. From the precise observation, some evidences of interfacial deterioration caused by water absorption were confirmed in both PW and MA CFRP laminates.     

Production of Lacto-N-biose I Using Crude Extracts of Bifidobacterial Cells

Lacto-N-biose I (LNB) is supposed to represent the bifidus factor in human milk oligosaccharides, and can be practically produced from sucrose and GlcNAc using four bifidobacterial enzymes, 1,3-β-galactosyl-N-acetylhexosamine phosphorylase, sucrose phosphorylase, UDP-glucose-hexose 1-phosphate uridylyltransferase, and UDP-glucose 4-epimerase, recombinantly produced by Escherichia coli. Here the production of LNB by the same enzymatic method without using genetically modified enzymes to consider the use of LNB for a food ingredient was reported. All four enzymes were produced as the intracellular enzymes of Bifidobacterium strains. The mixture of the crude extracts contained all four enzymes, with other enzymes interfering with the LNB production, namely, phosphoglucomutase, fructose 6-phosphate phosphoketolase, and glycogen phosphorylase. The first two interfering enzymes were selectively inactivated by heat treatment at 47 °C for 1 h in the presence of pancreatin, and glycogen phosphorylase was disabled by hydrolyzing its possible acceptor molecules using glucoamylase. Finally, 91 % of GlcNAc was converted into LNB in the 100-mL reaction mixture containing 300 mM GlcNAc.     

Computational cavitation flows at inception and light stages on an axial-flow pump blade and in a cage-guided control valve

Cavitation flows induced around an axial-flow pump blade and inside a high pressure cage-type valve are simu-lated by a two-dimensional unsteady Navier-Stokes analysis with the simplest treatment of bubble dynamics.Thefluid is assumed as a continuum of homogeneous dispersed mixture of water and vapor nuclei.The analysis isaimed to capture transient stages with high amplitude pressure change during the birth and collapse of the bubbleespecially at the stage of cavitation inception.By the pump blade analysis,in which the field pressure is moderate,cavitation number of the inception and locations of developed cavitation are found to agree with experimental re-suits in a wide flow range between high incidence and negative incidence.In the valve flow analysis,in which thewater pressure of 5MPa is reduced to 2MPa,pressure change responding to the bubble collapse between the vaporpressure lower than 1 KPa and the extreme pressure of higher than 10~4 KPa is captured through a stable computa-tion.Location of the inception bubble and pressure force to the valve plug is found agree well with the respectiveexperimental features.     

Locomotion Control of MEMS Microrobot Using Pulse‐Type Hardware Neural Networks

This paper presents the locomotion control of a microelectromechanical system (MEMS) microrobot. The MEMS microrobot demonstrates locomotion control by pulse‐type hardware neural networks (P‐HNN). P‐HNN generate oscillatory patterns of electrical activity like those of living organisms. The basic component of P‐HNN is a pulse‐type hardware neuron model (P‐HNM). The P‐HNM has the same basic features as biological neurons, such as the threshold, the refractory period, and spatiotemporal summation characteristics, and allows the generation of continuous action potentials. P‐HNN has been constructed with MOSFETs and can be integrated by CMOS technology. Like living organisms, P‐HNN has realized robot control without using software programs or A/D converters. The size of the microrobot fabricated by MEMS technology was 4 × 4 × 3.5 mm. The frame of the robot was made of a silicon wafer, equipped with rotary actuators, link mechanisms, and six legs. The MEMS microrobot emulated the locomotion method and the neural networks of an insect by rotary actuators, link mechanisms, and the P‐HNN. We show that the P‐HNN can control the forward and backward locomotion of the fabricated MEMS microrobot, and that it is possible to switch its direction by inputting an external trigger pulse. The locomotion speed was 19.5 mm/min and the step size was 1.3 mm. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 43–50, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22473     

Microbial synthesis and properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

Microbial synthesis of copolymers of [R]-3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB), P(3HB-co-4HB), by Alcaligenes eutrophus, Alcaligenes latus, and Comamonas acidovorans from various carbon sources has been studied. The copolyester compositions varied from 0 to 100 mol% 4HB, depending on the microorganism and the combination of carbon substrates supplied. The thermal and physical properties of compositions with 0–100 mol% 4HB were investigated. The copolyesters represented a wide variety of polymeric materials, from hard crystalline plastic to very elastic rubbers, depending on composition. The copolyester films with high 4HB fractions (64–100 mol% 4HB) exhibited the characteristics of a thermoplastic elastomer, and the tensile strength increased from 17 to 104 MPa as the 4HB fraction increased. The enzymatic degradation of P(3HB-co-4HB) films was studied in an aqueous solution of extracellular polyhydroxybutyrate (PHB) depolymerase from Alcaligenes faecalis or lipase from Rhizopus delemer. The erosion rate of P(3HB-co-4HB) films was strongly dependent on the copolymer composition. In addition, environmental degradation of P(3HB-co-4HB) films in sea water was investigated.