Interpolymer complexes of poly(acrylamide) and poly(N-isopropylacrylamide) with poly(acrylic acid): a comparative study

The interpolymer complexation, through successive hydrogen bonding, between poly(acrylamide) (PAAm) and poly(N-isopropylacrylamide) (PNiPAAm) with poly(acrylic acid) (PAA) in aqueous solution has been viscometrically and potentiometrically investigated. The stoichiometry of the complexes formed was determined. By comparing the strength of the two complexes the very important contribution of the hydrophobic interaction in their formation has been indicated.     

Development of blown film linear low-density polyethylene–clay nanocomposites: Part A: Manufacturing process and morphology

In this study, linear low-density polyethylene (LLDPE)/clay nanocomposites with different clay contents were prepared by melt intercalation using two different compatibilizers: maleic anhydride grafted styrene–ethylene–butylene–styrene and maleic anhydride grafted polyethylene (PE-g-MA). Melt intercalation was achieved by twin extrusion and nanocomposite films were produced by blown film extrusion. Effects of clay and compatibilizer fractions and type of compatibilizer on the structure, permeability, and the barrier properties of the nanocomposite films were investigated. PE-g-MA was shown to notably improve the dispersion of clay layers in the polyethylene matrix, and this was examined by atomic force microscopy and X-ray diffraction. The latter tests have also highlighted the importance of the screw configuration: the presence of mixing elements favors the dispersion and distribution of nanoclay. Moreover, differential scanning calorimetry results have shown no significant effect of the clay on the crystallinity of the composite while thermogravimetric analysis tests have demonstrated a decrease of onset and peak of decomposition temperatures. Finally, barrier properties toward water vapor transmission were measured. It was proven that not also clay, but the compatibilizer participated in decreasing the permeability of the film. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48589.     

Microtribology,squeeze, and friction of the colloidal layer

Lubricant films containing colloidal overbased calcium salts have particular effects on detergency and on the wear process. The mechanical properties of such boundary films are very dependent on the process conditions, and are essentially a result of physico-chemical transformations of the colloid. Three types of films were compared: a film obtained by the drying of the base solvent, a film due to the compaction of the colloid between two steel surfaces, and a friction film obtained with this type of lubricant. Adsorption, compaction, and shear transformations induce a solid film. The pressure effect on the frictional behaviour of these colloidal films has been investigated using a surface force apparatus for low contact pressure (10⁴ to 10⁶ Pa), and using tribometers supporting heavy loads for the analysis of the high pressure domain. Above a critical pressure, evaluated at 10⁶ Pa, the colloidal film does not flow, but forms a compacted mattress sliding on the surface plane and squeezing a molecular layer of lubricant.     

Characterisation of lactic acid bacteria isolated from fermented milk "laban"

The technological properties of 96 lactic acid bacteria isolated from Lebanese traditional fermented milk "laban" were characterised. They were classified by phenotypic and biochemical analyses as Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus, thus indicating that laban is a fermented milk similar to yogurt. Most strains of L. bulgaricus (87.5%) exhibited a high acidification activity, whereas strains of streptococci showed low acidification ability. 33.3% of streptococci strains and 25% of lactobacilli strains displayed similar acidification performances as European strains. Results obtained for syneresis, texture and rheological parameters led us to consider that isolated strains were not low polymer-producing strains. Some of them displayed interesting characteristics such as low syneresis and high values for rheological parameters. The major flavour compounds found in pure cultures were acetaldehyde, acetone, 2-butanone, dimethyl disulfide, acetoin, 2,3-butanedione, 2,3-pentanedione, and acetic, hexanoic and butanoic acids. Acetaldehyde (7.4%) and organic acids (48.3%) were mainly produced by L. bulgaricus strains, whereas streptococci cultures contained high relative levels of 2,3-butanedione and acetoin, which represented around 82% of the total flavour compounds. Finally, strains isolated from laban samples exhibited different technological properties than those used in yogurt production, thus conferring specific characteristics to this product.     

Goal-directed responding is sensitive to lesions to the prelimbic cortex or basolateral nucleus of the amygdala but not to their disconnection.

The current view of instrumental conditioning indicates that performance in the early stage of training is maintained by a representation of the outcome, as indexed by its sensitivity to changes in the value of the reward. In the present study, the authors tested the effects of a disconnection of the prelimbic cortex (PL) and the basolateral nucleus of the amygdale (BLA), using an asymmetric lesion procedure, to determine whether these structures interact sequentially as part of a corticolimbic system. In marked contrast to the effects of bilateral lesions of the PL or the BLA, which both altered rats' sensitivity to outcome devaluation, the disconnection of these 2 brain areas was without an effect on outcome devaluation. These results demonstrate that the PL and the BLA mediate different aspects of outcome representation in goal-directed responding. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Thermodynamic interpretation of retention equilibrium in reversed-phase liquid chromatography based on enthalpy-entropy compensation

The fundamentals of the retention equilibrium in reversed-phase liquid chromatography (RPLC) are studied on the basis of enthalpy-entropy compensation (EEC). First, retention data were acquired and the influence of the nature of the compounds, organic solvent modifier, and temperature on these data was assessed. Then, the data were analyzed according to the four different methods proposed by Krug et al., and an EEC was formally established. Linear correlations were observed between the logarithm of the adsorption equilibrium constants under the different RPLC conditions, suggesting linear free energy relationships (LFERs). Finally, the variations of the retentions with the experimental conditions are shown to be quantitatively explained by a new model based on EEC. This model affords a comprehensive interpretation of the variations of retention originating from changes of either one parameter alone or several simultaneously. The slope and intercept of the LFER that relates two equilibrium systems are accounted for by the new model. The parameters of this model are the changes of enthalpy and entropy associated with the retention, the compensation temperatures, and the experimental conditions.     

Advertising an event

The paper considers a problem of how to minimize advertising costs to sell seats for a particular event, for instance, a sports game, a rock concert or a ballet performance. We take into consideration a word-of-mouth effect, which means that people buying a ticket tell their friends about it, so that advertising is unnecessary to inform those people.The problem is one of optimal control and the number of seats sold and the advertising effort of the organizers are the state and control variables, respectively. We show that, besides being dependent on the cost and revenue parameters, the optimal advertising policy is also affected by the length of the planning period and the relation between the number of seats and the total number of potential attendees.     

An automatic node relabelling scheme for minimizing a matrix or network bandwidth

An automatic algorithm is presented for reducing the bandwidth of symmetric sparse connectivity matrices. The procedure takes an arbitrary input sequence and creates an optimal bandwidth for complex network systems by renumbering the node labels. Thus, considerable improvement for computer storage and time is achieved in the solution of the systems. A large number of examples is presented to demonstrate the reliability and the efficiency of the method.