Single-machine scheduling with deteriorating jobs under a series–parallel graph constraint

This paper considers single-machine scheduling problems with deteriorating jobs, i.e., jobs whose processing times are an increasing function of their starting times. In addition, the jobs are related by a series–parallel graph. It is shown that for the general linear problem to minimize the makespan, polynomial algorithms exist. It is also shown that for the proportional linear problem of minimization of the total weighted completion time, polynomial algorithms exist, too.     

Object illumination angle measurement in speckle interferometry

Errors in measurement of the object illumination angle affect fringe interpretation accuracies in speckle interferometry. To measure the object illumination angle we propose a method based on the moiré effect. The technique is easy to implement and was found to yield fast and accurate measurements.     

White-light reconstruction setup for shearograms using optical-fiber waveguides

A white-light reconstruction setup for shearograms using optical-fiber waveguides is presented. The setup is compact, is not susceptible to dust and scratches, and enables the two-dimensional fringe pattern on shearograms to be viewed directly under uniform and enhanced illumination with minimal image distortion.     

Anatomically constrained electrical impedance tomography for anisotropic bodies via a two-step approach

Discusses the inclusion of anatomical constraints and anisotropy in static Electrical Impedance Tomography (EIT) using a two-step approach to EIT. In the first step, the boundaries between regions of different conductivities are anatomically constrained using Magnetic Resonance Imaging (MRI) data. In the second step, the conductivity values in different regions are determined. Anisotropic conductivity regions are included to allow better modeling of the muscle regions (e.g., skeletal muscle) which exhibit a greater conductivity in the direction parallel to the muscle fiber. This two-step approach is used to reconstruct the conductivity profile of a canine torso, illustrating its potential application in extracting conductivity values for bioelectric modeling.     

Sub‐Micron Anisotropic InP‐based III–V Semiconductor Material Deep Etching for On‐Chip Laser Photonics Devices

Two InP‐based III–V semiconductor etching recipes are presented for fabrication of on‐chip laser photonic devices. Using inductively coupled plasma system with a methane free gas chemistry of chlorine and nitrogen at a high substrate temperature of 250 °C, high aspect ratio, anisotropic InP‐based nano‐structures are etched. Scanning electron microscopy images show vertical sidewall profile of 90° ± 3°, with aspect ratio as high as 10. Atomic Force microscopy measures a smooth sidewall roughness root‐mean‐square of 2.60 nm over a 3 × 3 μm scan area. The smallest feature size etched in this work is a nano‐ring with inner diameter of 240 nm. The etching recipe and critical factors such as chamber pressure and the carrier plate effect are discussed. The second recipe is of low temperature (?10 °C) using Cl₂ and BCl₃ chemistry. This recipe is useful for etching large areas of III–V to reveal the underlying substrate. The availability of these two recipes has created a flexible III–V etching platform for fabrication of on‐chip laser photonic devices. As an application example, anisotropic InP‐based waveguides of 3 μm width are fabricated using the Cl₂ and N₂ etch recipe and waveguide loss of 4.5 dB mm^?1 is obtained.

     

Multiple circular-harmonic-function correlation filter providing specified response to in-plane rotation

The circular-harmonic-function correlation filter originally proposed by Hsu and Arsenault [Appl. Opt. 21, 4016 (1982)] for in-plane rotation invariance uses only one harmonic, which results in poor discrimination capability of the filter. Various methods to use multiple harmonics were explored previously by different researchers. We present a new method to combine multiple circular harmonics into a single filter that can provide the desired correlation response to in-plane rotation while minimizing the correlation-plane energy. Since multiple harmonics are included, the filter can discriminate well, and since correlation-plane energy is minimized, correlation peaks tend to be sharp. Since the designer can specify the desired in-plane rotation response, a variety of filter behaviors (including complete invariance to input rotations) can be obtained. Underlying theory is discussed, and simulation results are presented.     

Online scheduling on two parallel-batching machines with limited restarts to minimize the makespan

We study online scheduling on two unbounded parallel-batching machines with limited restarts to minimize the makespan. In this system jobs arrive over time and a batch can be restarted if and only if all the jobs in it have never been restarted. To tackle this difficult problem, we make the second-restart assumption whereby we can only interrupt a running batch B at time t if both machines are busy at time t and batch B has a later starting time than the other running batch. For this case, we provide a best online algorithm with a competitive ratio . For the general problem, we show that no online algorithms can have a competitive ratio less than 1.298, leaving a gap from 1.298 to 1.366.     

Optimizing functionally graded nickel–zirconia coating profiles for thermal stress relaxation

The investigations on optimization of composite composition of nickel–zirconia for the functionally graded layered thermal barrier coating for the lowest but uniform stress field under thermal loading is presented. The procedure for obtaining temperature- and composition-dependent thermal and mechanical properties of various coating compositions is discussed. These material parameters were used in thermo-mechanical finite element stress analyses of a nickel substrate with the coating. The results showed that the Von-Mises stresses in the substrate and the interfaces were the lowest with the coating profile that followed a concave power law relationship with the index n ≈ 2.65.     

Analysis of maintenance policies for finite life-cycle multi-state systems

Maintenance policies for multi-state systems (MSS) are often analyzed under infinite horizon assumptions. In practice, it is important to consider maintenance policies under a finite horizon because the life cycles of most systems are finite. In this paper, we consider a finite life-cycle MSS that is subject to both degradation and Poisson failures. We study two classes of maintenance policies – preventive replacements and corrective replacements, and their effectiveness in controlling the customer’s expected discounted maintenance cost (EDMC). For both policies, replacement decisions are modelled via two control parameters – a threshold on the current system state and a threshold on the residual life cycle, which is measured as the time span from present to the end of life cycle. We derive close-to-explicit forms of the cost models under each of the policy. Methodologies for optimizing the maintenance thresholds are further proposed. Computational results verify that preventive replacements outperform corrective replacements typically when the downtime cost per failure is relatively high compared to the repair cost.