In situ image processing capabilities of ARM-based micro-controllers

Dealing with visual data is the key for environmental monitoring tasks in Wireless Multimedia Sensor Networks (WMSNs). Tasks such as object detection, recognition, and/or tracking do require extracting and using the right information from the inherently large amount of visual data. The widely accepted solution of legacy WSNs, transmitting the acquired data to a central base station for further processing, would render a WMSN totally useless because of the unacceptable use of bandwidth and energy. Therefore, we consider the in situ processing as a viable solution for WMSNs. However, processing power and memory capacity restrictions of existing multimedia sensor nodes along with their power consumption are the limiting factors for wide-spread use of in situ processing. Nevertheless, recent technological improvements and introduction of the new ARM cores encourage us to evaluate the image processing capabilities of ARM7/ARM9/ARM11 based micro-controllers for in situ processing in WMSNs. In this work, we first discussed the architectural design differences among the various ARM cores. Then we classified image processing algorithms into three categories. Then, we evaluated the performance of each microcontroller by running a set of basic image processing algorithms necessary for object detection, recognition, and/or tracking. The test results show that ARM11 runs up to 6–30 times faster than ARM9 and ARM7, respectively. Besides, ARM11 consumes up to 5–7 times less energy than ARM9 and ARM7 for the same type of operations.     

Mesoscopic structure and swelling properties of crosslinked polyethylene glycol in water

In this paper, we present our efforts in modeling and simulation of polyethylene glycol crosslinked with an isocyanate tHDI. The polymer, by its nature, is hydrophilic and has strong hydrogen bond interactions with water. The simulations are performed at coarse-grained scale by using a dissipative particle dynamics (DPD) simulation method. The effect of hydrogen bond between water and polymer beads on the structure of the crosslinked hydrophilic polymer structure is studied. The polymer is observed to phase separate with water in the absence of hydrogen bonds in DPD simulations. In the reverse case, where hydrogen bonds are explicitly included in DPD simulations, polymer mixes with water. This behavior is investigated by plotting the density profiles. Moreover, the volumetric swelling behavior in mixtures with different water contents is estimated from simulations and extrapolated by a polynomial fit to compare with experiments. It is observed that the predicted swelling ratio is in good agreement with the experimental measurements.     

Durability of concrete incorporating non-ground blast furnace slag and bottom ash as fine aggregate

The paper presents investigation of how the usage of bottom ash (BA), granulated blast furnace slag (GBFS), and combination of both of these materials as fine aggregate in concrete affects the concrete durability. To assess durability characteristics of concrete, durability tests were conducted and the results were evaluated comparing with reference concrete. Three series concrete were produced. GBFS, BA and GBFS+BA are replaced the 3–7 mm-sized aggregate. Five test groups were constituted with the replacement percentages as 10%, 20%, 30%, 40% and 50% in each series. These by-products were used as non-ground form in the concrete. Durability properties of the concretes were compared in order to study the possible advantages of different replacement ratios. According to results, GBFS and BA affects some durability properties of concrete positively in case of it is used as fine aggregate. Resistance to high temperature and surface abrasion are positively affected properties. Capillarity, drying-wetting and freezing-thawing resistance of the concrete can be accepted to some extent. Properties of by-products and its replacement ratio are controlling the influence level and direction. Comparison of the SEM images and test results show that chemical and physical properties of GBFS and BA are the main factors affecting the concrete durability. It is concluded that it is possible to produce durable concrete by using GBFS and BA as fine aggregate.     

Photovoltaic system assessment for a school building

The installation of photovoltaic panels (PVs) on the roof of residential and commercial buildings is getting widespread as these areas stand normally idle and can be used for another purpose without losing an inhabited space. Considering the solar potential of Turkey, a significant amount of electricity generation is possible using current PV technology. For this reason, a two-story detached school building located in ?zmir, Turkey was taken into consideration and monthly as well as annual coverage ratio of an on-grid PV system for its entire energy requirement (including heating, cooling and lighting) was investigated. The PVs were installed on the south face of the school building roof. A heat pump, with a typical coefficient of performance (COP) value of 2.5, was used for supplying required cooling and heating. The heating, cooling and lighting loads were determined on a monthly basis. The average monthly electrical energy generation of the mounted PVs was calculated using a written code in Energy Equation Solver (EES) software. As a result, the monthly as well as yearly electrical energy demand coverage ratio values for the school using the installed PVs were revealed. Since the school building has a large south faced roof, the installation of PVs is very suitable to meet the cumulative electrical energy need of the heat pump and the lighting load. For Case 1, 180 PVs, which supply the entire yearly demand (with a 110% coverage ratio), were taken into consideration, while for Case 2, 265 PVs, which cover 75% of the roof area, were evaluated. The results showed that between November and March, PV electrical energy generation is not sufficient to meet all energy need of the school for both cases. However, significant coverage ratio values were observed for the rest of the year. In a yearly basis, the PV generation exceeded the building demand by 62% for the Case 2. This conclusion points out that the school can meet its yearly electricity need with the considered PV system and can even have an additional financial profit by selling its surplus PV electricity to the grid. Economic and environmental payback time values as well as simple payback time value were also computed for both investigated cases. The results pointed out a simple payback time of 7.9 years for Case 1 and 7.6 years for Case 2. Energy payback time was determined as 5 years for both systems. The greenhouse gas payback time of 2.7 years and 5.9 years was encountered for coal based and natural gas based calculations.     

Phenolic composition and functional properties of wild mint (Mentha longifolia var. calliantha (Stapf) Briq.)

Mints (Mentha species) are widely used as food, medicine, spice, and flavoring agents. At the present work, phenolics profile of infusion and ethanol extract of Mentha longifolia was determined using an RP–HPLC–DAD system. Total bioactive contents, radical scavenging, reducing power, metal chelating, and enzyme inhibitory activities relevant to Alzheimer’s disease, diabetes mellitus, and skin disorders were evaluated. Sixteen phenolic compounds (ten phenolic acids and six flavonoids) were identified in the extracts in which sinapic acid (7132 µg/g extract) and rosmarinic acid (6260 µg/g extract) were the most abundant compounds. Strong antioxidant effects were observed in 1,1-diphenyl-2-picrylhydrazyl radical, 2,2?-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), cupric ion reducing activity, ferric reducing antioxidant power, phosphomolybdenum, and metal chelating assays. Results indicated selective acetylcholinesterase inhibitory activity and high α-amylase and α-glucosidase inhibitory potential. Findings showed that M. longifolia has promising health benefits due to its high concentration of useful phenolic compounds and has great potential for possible applications in the preparation of functional ingredients.     

Experimental Investigation of the Effect of Fire Protection Lobby on Stair Pressurization System in a High-Rise Building

In this study, the stair pressurization system in a 40-storey high office building in Istanbul is investigated through field tests, in order to understand the effect of the presence of a non-pressurized vestibule (fire protection lobby, FPL) before entering the stair at each floor. The building without FPL is simulated by keeping only one of the two doors (of the stair and FPL) open at each floor. This method gave an opportunity to fix other parameters affecting the stair pressurization system and check solely the effect of FPL. Two different cases are taken into account, where the first one (all doors closed) analyses the condition that all stair doors are kept closed and the second one (critical doors are open) is conducted when the stairwell is opened to the floor on a given level (fire floor) and the stair termination door at the discharge floor is kept open. For both cases, the availability of the FPL is investigated by using the aforementioned arrangement. Under the conditions with approximately the same pressurized air flow rate at all doors closed condition, it is found that the availability of FPL increases the pressure difference between the stairwell and the corridor by a factor of approximately 2.2. This is also justified by using empirical formulations available in literature, where this ratio is calculated as 2.0. The results of this study showed that the FPL arrangement improves the effectiveness of pressurization system in a very high-rise building, despite some tolerable drawbacks.     

Identification of phenolic profiles,fatty acid compositions,antioxidant activities,and enzyme inhibition effects of seven wheat cultivars grown in Turkey: A phytochemical approach for their nutritional value

In the present article, seven wheat cultivars (Ahmetaga, Bezostaya, Dagdas-94, Ekiz, Karahan-99, Konya-2002, and Tosunbey) grown in Turkey were compared for their phytochemical composition, antioxidant, and enzyme inhibitory activities. Antioxidant capacities and enzyme inhibitory effects were investigated with colorimetric methods. Total phenolic content ranged from 40.71 to 86.34 mg of gallic acid equivalent/100 g wheat grain. Tosunbey (92 mg Trolox equivalent/100 g wheat grain) and Ahmetaga (114.56 mg Trolox equivalent/100 g wheat grain) cultivars exhibited strong 2,2 azino-bis (3-ethylbenzothiazloine-6-sulfonic acid) and 1,1-diphenyl-2-picrylhydrazyl free radical scavenging activities. As compared to other wheat cultivars, Tosunbey cultivar had remarkable both antioxidant and enzyme inhibitory effects with the highest level of phenolics. Ferulic acid, chlorogenic acid, and apigenin were the major phenolics in extracts tested. This study suggested that an increased intake of wheat derived products could represent an effective strategy for the management of oxidative stress related chronic and degenerative diseases such as Alzheimers and diabetes mellitus.