Partitioning of polymers into pores with surface interactions at dilute solution limit

The partitioning of a single polymer chain into a slit in a good solvent with different surface interactions is examined through Monte Carlo simulations from subcritical regime to adsorptive regime. The chain conformation in the subcritical regime is not perturbed by the surface interactions significantly. In the adsorptive regime, the conformation of the chain is strongly perturbed by the surface interactions. The confinement free energy in the two regimes maybe written in a uniform formula, βΔμ_conf∼c₁N(a/D)^xε_w+c₂N(a/D)^1/ν with x∼2.0 or larger in the subcritical regime and ∼1.0 in the adsorptive regime, where ν is the Flory exponent, D is the slit width, N is the chain length, a is the monomer size, and ε_w is the surface interaction energy between the polymer beads and the slit. This formula is valid for a long chain in the narrow slit in the subcritical regime or when the adsorption layer h>D in the adsorptive regime. A critical behavior occurs when ε_w is at the critical adsorption point and x=1/ν, then Δμ_conf will have little dependence on N or D. Higher order terms that are neglected in the above equation, however, may be present that could lead to a weak dependence of K on N and D even in the critical adsorption point.     

国内外氟碳粉末涂料的开发现状与发展趋势

论述了国内外氟碳粉末树脂及涂料的开发现状,重点介绍热固性氟碳粉末树脂和涂料,比较了热塑性氟碳粉末涂料和热固性氟碳粉末涂料的性能及应用领域,指出今后氟碳粉末涂料的发展方向。     

氟碳粉末涂料的发展趋势

介绍了我国氟碳粉末涂料发展概况,对热塑性氟碳粉末涂料和热固性氟碳粉末涂料的性能特点、应用领域及市场发展前景进行了分析。     

Effects of nano‐ and micro‐fillers and processing parameters on injection‐molded microcellular composites

The effects of submicron core‐shell rubber (CSR) particles, nanoclay fillers, and molding parameters on the mechanical properties and cell structure of injection‐molded microcellular polyamide‐6 (PA6) composites were studied. The experimental results of PA6 nanocomposites with 5.0 and 7.5 wt% nanoclay loadings and of CSR‐modified PA6 composites with 0.5 and 3.1 wt% CSR loadings were compared to their neat resin counterparts. This study found that nanoclay was more efficient in promoting a smaller cell size, larger cell density, and higher tensile strength for microcellular injection molding parts. A higher nanoclay loading led to more brittle behavior for microcellular parts. It was found that a proper amount of CSR particles could be added to the microcellular injection‐molded PA6 to reduce the cell size, increase the cell density, and enhance the toughness of the molded part. However, CSR particles were less effective cell nucleation agents as compared to nanoclay for producing desirable cell structures, and a higher CSR loading was found to have diminishing effects on the process and on the properties of the parts. POLYM. ENG. SCI., 45:773–788, 2005. © 2005 Society of Plastics Engineers     

New anion exchanger organic–inorganic hybrid materials and membranes from a copolymerof glycidylmethacrylate and γ‐methacryloxypropyl trimethoxy silane

Organic–inorganic hybrid materials and mem branes were prepared through coating on Teflon plate or dip‐coating on microporous alumina substrates with the solution of glycidylmethacrylate (GMA) and γ‐methacryloxypropyl trimethoxy silane (γ‐MPS) copolymer, followed by ring‐opening of the GMA moiety with trimethylamine hydrochloric and sol–gel reaction of the γ‐MPS moiety. Composition of the GMA and γ‐MPS copolymer was varied by changing the feed ratio of GMA to γ‐MPS during the copolymerization. So the thermal stability, hydrophilicity, electrical properties, etc. of the hybrid materials and membranes were varied. Results showed that as the γ‐MPS amount increased in the copolymer, T_d (the temperature on thermogram at 5% weight loss) value of the hybrid materials and water contact angle of the hybrid membrane generally increased, while the anion exchange capacity, water uptake (W_R) and pure water flux decreased. The charge transition point of the hybrid membranes deduced from their streaming potential behavior decreased from pH > 12 to pH = 7–8 as the γ‐MPS amount increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3580–3589, 2006     

塑料挤出机主辅电机联动系统设计

本文在分析国内外挤出机生产线主辅电机同步联调特点的基础上,提出了一种实用的联调控制系统设计方案,控制系统设计采用纯硬件方式,可以广泛适用于国内未采用同步联调技术的挤出生产线,进行技术改造,对原有设备改动极小,具有很高的性能/价格比。     

基于SVM模型的妫水河叶绿素a浓度的遥感反演

以北京市妫水河为研究区,基于2011年9月25日和2012年9月30日的两期叶绿素a浓度实测数据和准同步的环境一号卫星(HJ-1A)多光谱数据,分别构建一元线性和多元支持向量机模型(SVMM),通过决定系数R²和平均相对误差对模型的精度进行检验,用模型进行水体叶绿素a浓度的反演,并分析其时空分布特征。研究表明:在样本数较少的情况下,SVM具有很强的非线性映射能力,能够取得较好的预测结果,更适用于反演叶绿素a浓度。时间分布上,研究区叶绿素a浓度呈增加趋势,均值上升了6.86 μg/L;空间分布上,深水区叶绿素a浓度值低于浅水区,上游高于下游。国产HJ-1A CCD2多光谱数据以其4 d的时间分辨率,在水质动态变化监测方面具有优势。     

云计算反取证的关键技术及其应用

云计算技术的迅猛发展,其带来的商业运营和信息服务模式的变化,为越来越多的企业所接受后,作为信息系统核心的数据中心也开始一步步地朝着云计算数据中心发展。在云计算环境下,云计算信息系统主要由云计算数据中心和用户端组成。数据中心是核心,是大脑,是所有资源汇集之处,是信息的枢纽,它通过网络向企业或公众提供信息服务。本文将结合云计算关键技术,对计算机反取证技术进行研究,有利于计算机取证人员的取证有效性。     

偶联剂改性填充剂在橡胶中的应用

比较不同种类偶联剂改性白炭黑和碳酸钙对胶料性能的影响及偶联剂用量对胶料物性的影响。结果表明：偶联剂Si-69对白炭黑的改性效果比钛酸酯偶联剂改性效果优越；偶联剂改性碳酸钙填充硫化胶的性能与未填充碳酸钙胶料的性能接近，并提高产品性价比，偶联剂Si-69在胶料中的用量以无机填料用量的4%-6%左右效果较好。