Determination of fermentative volatile compounds in aged red wines by near infrared spectroscopy

The purpose of this work was to study the possibility of determination of fermentative volatile compounds in aged red wines using NIR spectroscopy. To achieve this, 240 wines belonging to different geographic zones and elaborated with one or two varieties were analyzed. The volatile compounds were quantified by SBSE-GC–MS. Spectra obtained by NIR were co-related with these values using partial least square (PLS) regression. Calibration and validation statistics showed the quality of the model, after all when is done separately for each of the four geographic zones, and in the case of wines elaborated with two varieties. Consequently, near infrared spectroscopy can be used as an easy and rapid tool to determine fermentative volatile compounds in aged red wines.     

Hologram reconstruction corrected for measurements through layers with different refractive indices in digital in-line holographic microscopy

Digital in-line holographic microscopy (DIHM) using point sources has been shown to be a versatile technique, especially for three-dimensional tracking of particles or microorganisms. However, the spherical source wave is altered when measurements are performed through layers with different refractive indices, such as water cuvettes. The situations where a layer of medium with a refractive index different than that of the predominant surrounding propagation medium (usually air) is situated behind or in front of the plane to be reconstructed are analyzed in detail, and a general approach for reconstruction under such circumstances is developed. The proposed refractive index correction is tested experimentally and compared to conventional reconstruction algorithms. Using 3D traces of swimming algal spores, the influence on the velocity calculation is also shown.     

Radiative energy loss in a polysilicon CVD reactor

This work aims at understanding the energy loss in the polysilicon deposition reactor during the production of solar grade silicon. The radiative heat transfer between the polysilicon rods and the reactor wall in the so-called Siemens reactor is studied in detail in this paper. First, the most commonly used reactor configuration, 36 rods in three rings, is explained, detailing the particular radiation transfer of each rod toward the wall. Based on this analysis, some proposals for diminishing the energy loss are proposed: enlarge the reactor capacity, improve the properties of the reactor wall and introduce thermal shields. The impact of each proposal on the energy savings is quantified. If the reactor capacity is enlarged from 36 to 60 rods, the energy savings would be around 11 kWh per kg of polysilicon produced (kWh kg⁻¹). Increasing the reflectivity of the wall, the savings would be around 17 kWh kg⁻¹. And finally, the potential for cost reduction because of the introduction of thermal shields would be 20 kWh kg⁻¹.     

Using context to resolve temporal ambiguity.

Three conditioned lick suppression experiments with rats examined the role of the context in the selection and integration of independently acquired interval relationships. In Experiment 1, rats were exposed to separate conditioned stimuli 1 and 2 (CS1–CS2) pairings with 2 different interval relationships, each in its own distinctive context, X or Y. The resultant integration was determined by the training context (X or Y) in which unconditioned stimulus (US)–CS2 backward pairings occurred, as assessed in a third neutral context (Z). In Experiment 2, rats experienced CS1–CS2 pairings with 2 different interval relationships as in Experiment 1, and then received US–CS2 pairings in both contexts X and Y. The testing context (i.e., X or Y) determined the resultant integration. In Experiment 3, rats were exposed to CS1–CS2 pairings in 2 different interval relationships each in different phases (i.e., Phases 1 and 2), and then in Phase 3 received US–CS2 pairings. The temporal context of testing (i.e., short or long retention interval) determined the resultant integration. Thus, both physical and temporal context can be used to disambiguate conflicting temporal information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

High temperature tribological characterisation of TiAlSiN coatings produced by cathodic arc evaporation

This study reports on the wear properties at medium-high temperatures of TiAlSiN films deposited by cathodic arc evaporation on hot work steel substrates. The chemical composition and microstructure of the coatings were characterised by glow discharge optical emission spectroscopy, scanning electron microscopy and X-ray diffraction. The mechanical properties, i.e. hardness and elastic modulus were evaluated by nanoindentation, and the adhesion of the coatings was tested by scratch tests. Coatings with stoichiometries of Ti_0.31Al_0.1Si_0.06N_0.53 and Ti_0.23Al_0.12Si_0.09N_0.55 exhibit microstructures consisting of solid solutions of (Ti,Al,Si)N, where Al and Si replace Ti atoms. These films show high hardness and good adhesion strength to the hot work steels. Conversely, coatings with a stoichiometry of Ti_0.09Al_0.34Si_0.02N_0.55 show a wurtzite-like microstructure, low hardness and poor adhesion strength.The wear rates of the coatings were investigated by ball-on-disc experiments at room temperature, 200 °C, 400 °C and 600 °C, using alumina balls as counter surfaces. At room temperature, the films show wear rates of the same order of magnitude of TiN and TiAlN coatings. On the other hand, the wear rates of solid solution (Ti,Al,Si)N coatings measured at 200, and 400 °C are one order of magnitude smaller than those measured at room temperature due to the formation of oxide-containing tribofilms on the wear tracks. At 600 °C the wear rates increase but still keep smaller than those measured at room temperature, although this effect can be influenced by the softening of the steel substrates by over-tempering. EDS analyses revealed that, between 200 °C and 400 °C, the oxidation of the coating occurs only at the contact zone between the film and the counterpart body due to the sliding process.     

A systematic tool for the minimization of the life cycle impact of solar assisted absorption cooling systems

In recent years, there has been a growing increase of the cooling demand in many parts of the world, which has led to major energy problems. In this context, solar assisted absorption cooling systems have emerged as a promising alternative to conventional vapor compression air conditioning systems, given the fact that in many cases the cooling demand coincide with the availability of solar radiation. In this work, we present a decision-support tool based on mathematical programming for the design of solar assisted absorption cooling systems. The design task is formulated as a bi-criteria mixed-integer nonlinear programming (MINLP) optimization problem that accounts for the minimization of the total cost of the cooling system and the associated environmental impact measured over its entire life cycle. The capabilities of the proposed method are illustrated in a case study that addresses the design of a solar assisted ammonia-water absorption cycle considering weather data of Barcelona (Spain).     

Cr and Zr/Cr nitride CAE-PVD coated aluminum bipolar plates for polymer electrolyte membrane fuel cells

In this work, two nitride coatings deposited on aluminum-based bipolar plates via cathodic arc evaporation physical vapor deposition (CAE-PVD) have been evaluated using two different techniques. The coating materials, a multi-layer chromium-zirconium nitride (ZrN–CrN) and a monolayer chromium nitride (CrN) have been exposed to electrochemical polarization tests for corrosion resistance simulating the typical environment in the anode and cathode sides in polymer electrolyte membrane fuel cells (PEMFC). Besides, two 3-cell PEMFC stacks, one per each coating material, have been formed. The migration of metal cations toward both the gas diffusion layers (GDL) and catalyst layers have been analyzed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX), after 100 h of continuous operation of the stacks. Results have shown that the two coatings applied over the Al-plates satisfy the corrosion resistance requirements in the short-term tests performed at the two stacks. Moreover, results obtained from electrochemical polarization tests have revealed that the CrN-coating confers a good corrosion resistance to the Al-based metal plate, achieving values of corrosion potential and corrosion current two orders of magnitude lower than the ones obtained for the Al alloy as-received.     

Glycosylation,denaturation, and aggregation of soy proteins in defatted soy flakes flour: Influence of thermal and homogenization treatments

This article provides a systematic study of the impact of different thermal treatments (62 ± 2°C, without and with relative humidity control, 79%) on soy protein in defatted soy flour and their aqueous dispersions. The effect of dispersing treatments (magnetic stirring, high-speed, and high-pressure homogenization) on dispersions also was assessed. Changes in protein solubility (water and 0.2 g/100 g potassium hydroxide solution), apparent-reactive lysine content, urease and trypsin inhibitor activities, protein denaturation, and Fourier transform infrared spectra were studied. Glycosylation, aggregation, and denaturation of storage and biologically active soy proteins were observed in different degrees, being mainly promoted by the control of relative humidity and the dispersibility of the sample.     

On telescope performance evaluation

Abstract

We analyse the imaging performance of synthetic-aperture optical systems (diluted aperture and segmented aperture) using the modulation transfer function. We select a single figure-of-merit, the functional cut-off frequency, over the traditional cut-off frequency, as the most useful one for assessing the optical performance of an instrument for its imaging capacity. A simplified aperture layout is proposed with the performance equivalent to that of the Keck telescope, incorporating a smaller number of segments. The detailed analysis in the spatial frequency plane leads us to observe that the central ring of the hexagons in the Keck telescope does not contribute to its resolution.