GOLPH3 Regulates EGFR in T98G Glioblastoma Cells by Modulating Its Glycosylation and Ubiquitylation

Protein trafficking is altered when normal cells acquire a tumor phenotype. A key subcellular compartment in regulating protein trafficking is the Golgi apparatus, but its role in carcinogenesis is still not well defined. Golgi phosphoprotein 3 (GOLPH3), a peripheral membrane protein mostly localized at the trans-Golgi network, is overexpressed in several tumor types including glioblastoma multiforme (GBM), the most lethal primary brain tumor. Moreover, GOLPH3 is currently considered an oncoprotein, however its precise function in GBM is not fully understood. Here, we analyzed in T98G cells of GBM, which express high levels of epidermal growth factor receptor (EGFR), the effect of stable RNAi-mediated knockdown of GOLPH3. We found that silencing GOLPH3 caused a significant reduction in the proliferation of T98G cells and an unexpected increase in total EGFR levels, even at the cell surface, which was however less prone to ligand-induced autophosphorylation. Furthermore, silencing GOLPH3 decreased EGFR sialylation and fucosylation, which correlated with delayed ligand-induced EGFR downregulation and its accumulation at endo-lysosomal compartments. Finally, we found that EGF failed at promoting EGFR ubiquitylation when the levels of GOLPH3 were reduced. Altogether, our results show that GOLPH3 in T98G cells regulates the endocytic trafficking and activation of EGFR likely by affecting its extent of glycosylation and ubiquitylation.     

High-Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer

In this work, the effectiveness of seven commercial compatibilizers is tested in polylactide (PLA)/poly(ε-caprolactone) (PCL) blends with different compositions to obtain a high-impact PLA. None of the compatibilizers is effective for 90/10 and 80/20 PLA/PCL compositions, as no improvement of the impact strength is observed. For the 70/30 composition, compatibilizers having glycidyl methacrylate (GMA) and acrylate groups in their structure are proved the most effective, as the morphological change towards co-continuity induced by them leads to significant impact strength improvements (of ≈345% and 90% with respect to the neat PLA and the noncompatibilized PLA/PCL 70/30 blend, respectively). The 70/30 PLA/PCL composition, as it shows the best balance of properties, and the best compatibilizer (ElvaloyPTW) are chosen to carry out the optimization of the compatibilizer content. It is found that adding 6 phr to the blend results in highly toughened and ductile blends while maintaining a high modulus and yield strength values. Larger compatibilizer contents lead to even higher impact strength values, but the low-strain mechanical properties are notably reduced. Thus, in this work, a simple and easily scalable method to produce high-impact PLA is shown, as it implies the compounding of three commercially available components without involving any toxic solvents.     

Detection and Discrimination of Conspecific Scents by the Anguid Slow-Worm Anguis fragilis

We tested the ability of male slow-worms, Anguis fragilis, a limbless anguid lizard with secretive, semifossorial habits, to detect chemical associated with conspecifics by using a T-maze in the laboratory. Male slow-worms discriminated conspecific male and female scent deposits. Males selected the arm with female scent, suggesting that scent deposits may be used to locate potential mates. Also, male slow-worms did not avoid the chemicals of other males, suggesting that they are not territorial. However, males discriminated their own scent from those of other males, and spent more time exploring the arm with other male scent, which suggests that scent marks may bear information that could be used in future intrasexual social contexts. We conclude that discrimination of conspecifics based on scents may be more widespread than previously expected among lizards inhabiting visually restricted environments.     

Global optimization of large‐scale mixed‐integer linear fractional programming problems: A reformulation‐linearization method and process scheduling applications

Mixed‐integer linear fractional program (MILFP) is a class of mixed‐integer nonlinear programs (MINLP) where the objective function is the ratio of two linear functions and all constraints are linear. Global optimization of large‐scale MILFPs can be computationally intractable due to the presence of discrete variables and the pseudoconvex/pseudoconcave objective function. We propose a novel and efficient reformulation–linearization method, which integrates Charnes–Cooper transformation and Glover's linearization scheme, to transform general MILFPs into their equivalent mixed‐integer linear programs (MILP), allowing MILFPs to be globally optimized effectively with MILP methods. Extensive computational studies are performed to demonstrate the efficiency of this method. To illustrate its applications, we consider two batch scheduling problems, which are modeled as MILFPs based on the continuous‐time formulations. Computational results show that the proposed approach requires significantly shorter CPU times than various general‐purpose MINLP methods and shows similar performance than the tailored parametric algorithm for solving large‐scale MILFP problems. Specifically, it performs with respect to the CPU time roughly a half of the parametric algorithm for the scheduling applications. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4255–4272, 2013     

Stability of the lipid fraction of milk‐based infant formulas during storage

A study is made of the effects of storage (time and temperature) on the lipid fraction of four milk‐based adapted infant formulas with basically the same composition, though differing in the iron salt added (lactate or sulfate) and/or the vitamin E source (α‐tocopherol or α‐tocopherol acetate). Peroxide value, hydroperoxide C₁₈ percentage and thiobarbituric acid‐reactive substance (TBARS) content were used as indicators of lipid peroxidation. Fat contents remained stable throughout storage. Peroxide values increased from the first storage month and were affected by storage time, although they exhibited irregular behavior. Storage time and temperature affected hydroperoxide percentage, which was seen to be the earliest indicator of lipid oxidation, being measurable in newly manufactured formulas. TBARS values were only affected by storage time. No statistically significant differences were found among the four infant formulas for any of the lipid oxidation indicators.     

Supertoughness in Polysulfone/Poly(ethylene‐octene) Blends

Summary: Poly(sulfone of Bisphenol A) (PSU) based blends were obtained by melt blending PSU with up to 15 wt.‐% poly(ethylene‐octene) either modified with maleic anhydride (mPEO) or not (PEO). The dispersed particle size was small and similar in blends with PEO or mPEO. These facts indicated respectively that the interfacial tension was low and the lack of compatibilizing effect of mPEO. Some preferential presence of PEO in the outer surface of the specimens was observed, and was attributed to the large viscosity difference between the two components of the blends. This had no effect on the modulus of elasticity, but speeded up both the yield stress and ductility decreases at rubber contents above 3.25 wt.‐%. However, despite the immiscibility of the components, and thanks to the small particle size of the blends, super‐toughness was attained in the unmodified PSU/PEO blends. This was at PEO contents (3.25 wt.‐%) at which the modulus, yield stress and ductility of the blends were almost as good as those of pure PSU. It appeared that a change of the chemical nature of the rubber did not influence by itself super‐toughness, unless it was accompanied by either a morphological or adhesion change.

Impact strength of PSU‐based blends vs. PEO (○) or mPEO (?) content.     

Mechanical improvement of concrete by irradiated polypropylene fibers

Fiber reinforced concrete (FRC) contains fibers physically mixed with gravel, sand, cement, and water. So far, adequate mechanical performance of FRC has been obtained at high cost and using complex technologies; important here is the geometry and surface characteristics of the polymers. We have modified polymeric‐fiber surfaces by using gamma radiation. Irradiated polypropylene (PP) fibers were submitted to 0, 5, 10, 50, and 100 kGy of gamma irradiation dosages. First, tensile strength of PP fibers was evaluated, and then fibers blended at 0, 1.0, 1.5, and 2.0% in volume with Portland cement, gravel, sand, and water. The highest values of compressive strength were obtained with irradiated‐fibers at 10 kGy and 1.5% in volume of fiber. The result is 101 MPa, as compared to 35 MPa for simple concrete without fibers. POLYM. ENG. SCI., 45:1426–1431, 2005. © 2005 Society of Plastics Engineers     

Time-Dependent Quantum-Mechanical Approaches to the Continuous Spectrum: Scattering Resonances in a Finite Box

Several novel aspects of scattering resonances are studied. An expression, valid for a finite box, relating the continuum phase shift with the energy shift and unperturbed level separation is proposed and applied to obtain the resonance parameters. The effect of the resonance on propagating a wavepacket in imaginary time is studied. It is observed that the resonance strongly affects the cumulants of the energy distribution. In particular, a local minimum of the first derivative of the energy with respect to time (proportional to the second cumulant) serves to estimate the resonance energy and wavefunction. Once the estimate is known, the autocorrelation function is used to evaluate the resonance width. Alternatively, a new iterative approach is developed that is capable of selectively yielding an arbitrary band of energy eigenvalues and eigenfunctions on a grid. This method is applied to give those energy levels that are of interest for the discrete computation of the resonant phase shift, i.e., those close to resonance. Exact (analytical) and approximate results are in good agreement for a particular separable potential model in one dimension. These methods can be extended to realistic potentials in higher dimensions.     

Characterization of grape seed oil from different grape varieties (Vitis vinifera)

In this work, oil obtained from seeds of different red grape varieties, grown in the Autonomous Regions of Castilla‐La Mancha and Murcia (Spain), was characterized by determining physicochemical and sensory quality parameters, stability, and the composition in fatty acids and sterols. The physicochemical quality parameters (free acidity, peroxide index, K₂₇₀ and wax) scored high (meaning low quality) compared with virgin olive oils, while the negative sensory attributes stood out over the positive ones. Therefore, the oil was not considered suitable for table use without undergoing a refining process. The samples showed high linoleic and low linolenic acid contents, while β‐sitosterol was the main sterol found. Drying grape seeds with hot air before extraction gave higher physicochemical quality, total phenolic content and stability, and lower wax content in comparison to air‐drying of seeds. The drying process affected the sterol composition but not the fatty acid composition.