ESD phenomena in GMR heads in the manufacturing process of HDD and GMR heads

It is well known that giant magnetoresistive (GMR) heads used for hard disk drives (HDD) are very sensitive to electrostatic discharge (ESD). In this paper, we describe a method of categorizing ESD damage modes from a standpoint of magnetic influences on the heads as observed by quasi-static test (QST) characteristics as well as electromagnetic characteristics like off-track profiles. In addition, we report an example of GMR stack interlayer diffusion which is one type of hard ESD damage. We also present an example of ESD damage that happened in an actual production process and its preventive measures as guidelines.     

Effect of Sodium Lauryl Sulphate and TweenR80 on the Therapeutic Efficacy of Glibenclamide Tablet Formulations in Terms of BSL Lowering in Rabbits and Diabetic Human Volunteers

Glibenclamide has limited gastrointestinal absorption. Therefore, different concentrations of sodium lauryl sulphate and tween^R80 were included into the tablet formulations to increase the absorption of the drug and hence, to enhance the BSL lowering in rabbits and human volunteers suffering from maturity onset diabetes mellitus. It was found that the surfactants had enhanced both the rate and extent of BSL lowering in rabbits as well as in diabetic patients in higher concentrations present in the tablet formulations.     

A family of highly symmetric codes

We define a class of codes admitting a large automorphism group. This family contains the binary extended Hamming code, the hexacode, the Golay codes, the Pless symmetry codes, as well as the [16,4,12]/sub 8/-codes constructed by Marcugini et al. A computer search resulted in the construction of codes with new parameters [28,7,18]/sub 8/,[32,8,20]/sub 8/, and [39,13,17]/sub 4/ belonging to this family.     

Use of 3D modelling and several ultrasound sensors to assess overflow rate.

A new instrumentation mode has been put in place in order to determine the overflow rate of five complex CSOs of the system in Sélestat (French), which are subject to self monitoring. 3D and 1D models have made it possible to predict the shapes of the water lines and suggest a location for the ultrasound sensors. In order to validate the instrumentation principle, three overhead sensors were placed on a weir. The overflow laws suggested are of the type Q(overflow) = a1h1b1 + a2h2b2 + a3h3b3. Early results of the overflow rate that have been obtained by applying the law are close to 10 % of the flow measured in the physical test bench. On the actual site, the ultrasound sensors were assembled on a rail covering the entire weir in order to be able to change their position in future after models calibration.     

Electroluminescence spectroscopy for reliability investigations of 1.55 μm bulk semiconductor optical amplifier

This paper demonstrates the complementary relation between functional parameters and electroluminescence spectroscopy for reliability investigations of 1550 nm Semiconductor Optical Amplifiers of 700 μm length active region. Ageing tests have been set to 270 mA-100 °C-1500 h and realized on two different wafers showing more impact on wafer 1 than on wafer 2. Our investigations are particularly focused on interpretation of electroluminescence spectra, from reference and aged SOAs of wafer 1, leading to an improvement of degradation mechanisms understanding. The shift rate to lower energies of the recombination energy peak at 1550 nm, as reported by electroluminescence spectra between reference and aged SOAs in relation with the decrease of optical power measured at 200 mA for the degraded SOA and completed by I(V) characterizations, suggest occurrence of non radiative deep centers near the buried ridge structure in relation with the cleaning process uniformity of interfaces before epitaxial overgrowth. These defects mainly trap majority injected carriers instead of minority carriers reducing the luminescence in the active zone. By monitoring the most sensitive failure indicator (pseudo-threshold current), lifetime distributions are also calculated to determine failure rate, between 150 and 200 FITs over 15 years for operating conditions (25 °C-200 mA) using experimental degradation laws and statistic computations, demonstrating the overall robustness of this technology.     

Parathion degradation and toxicity reduction in solar photocatalysis and photolysis.

The solar photocatalytic degradation of methyl parathion was investigated using a circulating TiO2/solar light reactor. Under solar photocatalysis condition, parathion was more effectively degraded than solar photolysis and TiO2-only conditions. With solar photocatalysis, 20 mg/L of parathion was completely degraded within 60 min with a TOC decrease of 63% after 150 min. The main ionic byproducts during photocatalysis recovered from parathion degradation were mainly as NO3-, NO2- and NH4+, 80% of the sulphur as SO4(2-), and 5% of phosphorus as PO4(3-). The organic intermediates 4-nitrophenol and methyl paraoxon were also identified, and these were further degraded in solar photocatalytic condition. Two different bioassays (Vibrio fischeri and Daphnia magna) were used to test the acute toxicity of solutions treated by solar photocatalysis and photolysis. The Microtox test using V. fischeri showed that the toxicity expressed as EC50 (%) value increased from 5.5% to >82% in solar photocatalysis, indicating that the treated solution is non-toxic, but only increased from 4.9 to 20.5% after 150 min in solar photolysis. The acute toxicity test using D. magna showed that EC50 (%) increased from 0.05 to 1.08% under solar photocatalysis, but only increased to 0.12% after 150 min with solar photolysis, indicating the solution is still toxic. The pattern of toxicity reduction parallels the decrease in TOC and the parathion concentrations.     

A tool shelf for tracking design decisions

An extensible conceptual model for recording design decisions and other supporting information is described along with the tool shell OSC in which it is embedded. The OSC shell consists of a design database and a family of query, manipulation, and extension facilities. The design database maintains a record of the design process. The extension facilities can be used to enrich the design database scheme incrementally and create new query or manipulation facilities. The core model provides a base language for describing the design process. Extension facilities augment this basis with more powerful, customized facilities. The implementation of the OSC shell using ESSAIM, an expert-system shell based on Smalltalk, is discussed     

A Narrowband Pulse-Echo Technique for In Vivo Ultrasonic Attenuation Estimation

The principles of a narrowband technique for pulse echo attenuation measurements are presented. Experiments are described which compare the attenuation in tissue-mimicking phantoms, measured by known methods, to the attenuation measured by the present technique. The effects of various experimental parameters on the results are investigated. The attenuation in spleens of canine models and in livers of human volunteers is presented.     

Satellite-to-Satellite Range-Rate Measurement

The measurement of range rate between two low-orbiting spacecraft with a precision of better than 1 ?m/s provides a means for sensing global gravity variability. An analysis is given to show the conditions under which this precision can be realized, with emphasis on the requirements of NASA's Geopotential Research Mission. Experimental results obtained with a millimeter-wave demonstration system are presented along with a proposed design for a spaceborne instrument.     

Influence of nitrate, ascorbic acid, and nitrate reductase microorganisms on N-nitrosamine formation during Korean-style soysauce fermentation.

Traditional Korean soysauce samples were collected from households in Chinju, Gyeongnam, Korea and analysed for volatile N-nitrosamines. Five of 24 samples contained NDMA (range = 1.6-10.4 micrograms/l) which was the only volatile N-nitroso compound found. Soysauce made from well water contained NDMA more often (4 of 6 samples) than soysauce made from tap water (1 of 18). This suggests that the water source is a determinate in the NDMA content of soysauce, probably due to a higher nitrate content of well water. The source of salt used did not clearly influence NDMA content. Soysauce was prepared in the laboratory using traditional methods but with 0 to 400 mg/l nitrate and in some cases made 6.5 to 65 mM in ascorbic acid and fermented for 120 days. The NDMA content of the samples was positively correlated with increasing nitrate concentration. Nitrate at 400 mg/l resulted in an NDMA content of 203 micrograms/l. Ascorbic acid substantially inhibited NDMA formation. All samples contained large numbers of nitrate reductase-containing organisms (greater than 1 x 10(7) CFU/ml).