Banana peel: an effective biosorbent for aflatoxins

This work reports the application of banana peel as a novel bioadsorbent for in vitro removal of five mycotoxins (aflatoxins (AFB1, AFB2, AFG1, AFG2) and ochratoxin A). The effect of operational parameters including initial pH, adsorbent dose, contact time and temperature were studied in batch adsorption experiments. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pH_pzc) analysis were used to characterise the adsorbent material. Aflatoxins’ adsorption equilibrium was achieved in 15 min, with highest adsorption at alkaline pH (6–8), while ochratoxin has not shown any significant adsorption due to surface charge repulsion. The experimental equilibrium data were tested by Langmuir, Freundlich and Hill isotherms. The Langmuir isotherm was found to be the best fitted model for aflatoxins, and the maximum monolayer coverage (Q₀) was determined to be 8.4, 9.5, 0.4 and 1.1 ng mg^?1 for AFB1, AFB2, AFG1 and AFG2 respectively. Thermodynamic parameters including changes in free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined for the four aflatoxins. Free energy change and enthalpy change demonstrated that the adsorption process was exothermic and spontaneous. Adsorption and desorption study at different pH further demonstrated that the sorption of toxins was strong enough to sustain pH changes that would be experienced in the gastrointestinal tract. This study suggests that biosorption of aflatoxins by dried banana peel may be an effective low-cost decontamination method for incorporation in animal feed diets.     

Core–shell structured Cu@Pt nanoparticles as effective electrocatalyst for ethanol oxidation in alkaline medium

Core–shell nanoparticles of Cu@Pt/C electrocatalysts were synthesized using various Pt:Cu atomic ratios with NaBH₄ as a reducing agent. The crystal structure and surface morphology were studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The incorporation of copper in Cu@Pt/C electrocatalysts was found to shift all Pt diffraction planes in the negative direction with expanding the crystal lattice dimensions. The electrocatalytic activity of various Cu@Pt/C electrocatalysts was investigated using cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. Cu@Pt/C electrocatalysts containing Pt:Cu atomic ratios of 1:0.5 and 1:2 showed an enhanced electrochemical performance for ethanol oxidation when related to Pt/C.     

Polylactide‐perylene derivative for blue biodegradable organic light‐emitting diodes

In this work we demonstrate, for the first time, the use of polylactic acid (PLA) as a biodegradable host matrix for the construction of the active emissive layer of organic light‐emitting diode (OLED) devices for potential use in bioelectronics. In this preliminary study, we report a robust synthesis of two fluorescent PLA derivatives, pyrene‐PLA ( AH10 ) and perylene‐PLA ( AH11 ). These materials were prepared by the ring opening polymerisation of l ‐lactide with hydroxyalkyl‐pyrene and hydroxyalkyl‐perylene derivatives using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene as catalyst. OLEDs were fabricated from these materials using a simple device architecture involving a solution‐processed single‐emitting layer in the configuration ITO/PEDOT:PSS/PVK:OXD‐7 (35%): AH10 or AH11 (20%)/TPBi/LiF/Al (ITO, indium tin oxide; PEDOT:PSS, poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid); PVK, poly(vinylcarbazole); OXD‐7, (1,3‐phenylene)‐bis‐[5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole]; TPBi, 2,2′,2″‐(1,3,5‐benzenetriyl)tris(1‐phenyl‐1H‐benzimidazole)). The turn‐on voltage for the perylene OLED at 10 cd m^–2 was around 6 V with a maximum brightness of 1200 cd m^–2 at 13 V. The corresponding external quantum efficiency and device current efficiency were 1.5% and 2.8 cd A^–1 respectively. In summary, this study provides proof of principle that OLEDs can be constructed from PLA, a readily available and renewable bio‐source. © 2020 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.     

Influence of metal‐oxide‐supported bentonites on the pyrolysis behavior of polypropylene and high‐density polyethylene

In this article, we report on the pyrolysis of polypropylene (PP) and high‐density polyethylene (HDPE) in the absence and presence of plain and metal‐oxide‐impregnated bentonite clays [BCs; acid‐washed bentonite clay (AWBC), Zn/AWBC, Ni/AWBC, Co/AWBC, Fe/AWBC, and Mn/AWBC] into useful products. Thermal and catalytic runs were performed at 300°C in the case of PP and at 350°C in the case of HDPE for a contact time of 30 min. The effects of different catalysts and their concentrations on the overall yields and the yields of liquid, gas, and residue were studied. The efficacy of each catalyst is reported on the basis of the highest liquid yields (in weight percentage). The derived liquid products were analyzed by Fourier transform infrared spectroscopy and gas chromatography–mass spectroscopy; this confirmed the presence of paraffins, olefins, and naphthenes. The results indicate the catalytic role of impregnated BCs compared to plain BC with the optimum efficiency shown by Co/AWBC in the case of PP and Zn/AWBC in the case of HDPE toward the formation of liquid products in a desirable C range with the enrichment of olefins and naphthenes in the case of PP and paraffins and olefins in the case of HDPE compared to the thermal run. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41221.     

A new application of giant reed waste material for ammonium removal

Excess nitrogen is one of the main causes of eutrophication in water bodies. In this study, the undesirable agricultural lignocellulosic material giant reed was used to remove ammonium ions from aqueous solutions. Batch experiments were conducted to investigate the effect of various parameters such as contact time, initial ammonium concentration, adsorbent dosage, pH, particle size, agitation rate and phosphate coexisting during the ammonium adsorption process. The ammonium sorption capacity of fibrous giant reed (FGR) at equilibrium was 12.49?mg?N/g with a maximum removal efficiency of 76% observed within 30?min at pH range of 6.5–9.5. Results revealed that the Freundlich isotherm model fitted better with the sorption process than the Langmuir model, and the adsorption process was well described by pseudo-second-order kinetic model. FT-IR analyses indicated that complexation and ion exchange could be the main mechanisms for the ammonium removal by FGR. Results revealed that FGR has a sorption capacity comparable to that of other natural sorbents with the advantage of greater availability with no cost.     

Resource Leveling in Line‐of‐Balance Scheduling

Resource leveling involves minimizing resource fluctuations without changing the completion time of a project. A smooth distribution of resources minimizes logistical problems and results in cost savings. Line‐of‐balance (LOB) is a resource‐based scheduling system that is used in projects that exhibit repetitive characteristics, performs resource allocation as a matter of course, but does not deal with resource leveling. In the past, researchers experienced declines in productivity whenever they leveled resources in different linear scheduling models by adjusting activities’ production rates. The objective of this research is to develop a genetic algorithm‐based resource leveling model for LOB schedules that does not impact productivity negatively. This model is based on the “natural rhythm” principle, according to which a crew of optimum size will be able to complete an activity in the most productive way. The “natural rhythm” principle allows shifting the start time of an activity at different units by adjusting the number of crews without changing the duration of the activity in any one unit and without violating the precedence relationships between activities. An LOB schedule is established for a pipeline project and is used to illustrate the proposed resource leveling model. It was observed that the model provides a smoother resource utilization histogram. Performing resource leveling in LOB scheduling without sacrificing productivity is the major contribution of the proposed model.