Kinetics of Soybean Oil Hydrolysis on Niobium Catalysts

The catalytic hydrolysis of soybean oil was used as an alternative for the production of monoglycerides (MG) and diglycerides (DG). The reactions were conducted in a stainless-steel tubular reactor in the temperature range of 240–290 °C, on niobium phosphate (NBP) and niobium oxide (NBO) as catalysts. In the hydrolysis reactions at 270 °C, the maximum selectivities of the products of interest were obtained at 22 % MG and 48 % DG for the reaction with NBP, and 7 % MG and 33 % DG with NBO, for 59 % and 36 % of triglyceride conversion in 10 min, respectively. The proposed kinetic model presented a good fit of the theoretical model with the experimental data, showing that the previous hypotheses considered for the mechanism development are suitable for describing the kinetics of soybean oil hydrolysis.     

New Formulation of a Methylseleno-Aspirin Analog with Anticancer Activity Towards Colon Cancer

Aspirin (ASA) has attracted wide interest of numerous scientists worldwide thanks to its chemopreventive and chemotherapeutic effects, particularly in colorectal cancer (CRC). Incorporation of selenium (Se) atom into ASA has greatly increased their anti-tumoral efficacy in CRC compared with the organic counterparts without the Se functionality, such as the promising antitumoral methylseleno-ASA analog (1a). Nevertheless, the efficacy of compound 1a in cancer cells is compromised due to its poor solubility and volatile nature. Thus, 1a has been formulated with native α-, β- and γ-cyclodextrin (CD), a modified β-CD (hydroxypropyl β-CD, HP-β-CD) and Pluronic F127, all of them non-toxic, biodegradable and FDA approved. Water solubility of 1a is enhanced with β- and HP- β-CDs and Pluronic F127. Compound 1a forms inclusion complexes with the CDs and was incorporated in the hydrophobic core of the F127 micelles. Herein, we evaluated the cytotoxic potential of 1a, alone or formulated with β- and HP- β-CDs or Pluronic F127, against CRC cells. Remarkably, 1a formulations demonstrated more sustained antitumoral activity toward CRC cells. Hence, β-CD, HP-β-CD and Pluronic F127 might be excellent vehicles to improve pharmacological properties of organoselenium compounds with solubility issues and volatile nature.     

A Facile and Green Microwave-Assisted Strategy to Induce Surface Properties on Complex-Shape Polymeric 3D Printed Structures

Light- induced polymeric 3D printing is becoming a well-established fabrication method, showing manifold advantages such as control of the local chemistry of the manufactured devices. It can be considered a green technology, since the parts are produced when needed and with minimum amount of materials. In this work 3D printing is combined with another green technology, microwave-assisted reaction, to fabricate objects of complex geometry with controllable surface properties, exploiting the presence of remaining functional groups on the surface of 3D printed specimens. In this context, surface functionalization with different amines is studied, optimizing formulations, reaction times, and avoiding surface deterioration. Then, two different applications are investigated. MW-functionalized filter-type structures have been tested against Staphylococcus aureus bacteria, showing high bactericidal activity on the surface along all areas of the complex-shaped structure. Second, a fluidic chip composed of three separated channels is 3D printed, filled with different amine-reactive dyes (dansyl and eosine derivatives), and made to react simultaneously. Complete and independent functionalization of the surface of the three channels is achieved only after 2 min of irradiation. This study demonstrates that light induced 3D printing and microwave-induced chemistry can be used together effectively, and used to produce functional devices.     

Characterization of peptide and amino acid profile in casein hydrolysates

The nutritional quality of protein hydrolysates has been related in several reports to their di- and tripeptide contents. In the present work different hydrolytic conditions were tested using papain in order to prepare casein hydrolysates with a suitable peptide profile for being used in special diets. The hydrolysates were fractionated by size-exclusion HPLC and the rapid Correct Fraction Area method was used for quantifying the peptides. Among the five hydrolytic conditions studied, three of them gave rise to preparations having nutritionally similar peptide profiles. However, the use of the temperature of 37 degrees C and enzyme:substrate ratio (E:S) of 2% may probably be the most economical condition for industrial production.     

Creep of PVDF monofilament sutures: service performance prediction from short-term tests

Isothermal short-term creep of poly (vinylidene fluoride) (PVDF) monofilament sutures was determined at several temperatures between 10 and 90 °C under the stress of 10 MPa. Long term service performance was predicted for 10 decades of time. The compliance master curve as a function of time fits a hyperbolic sine equation. The temperature shift factor as a function of the temperature a_T (T) is accurately represented by a general equation based on free volume. A simple relationship between the two parameters of the equation is explored. The viscoelasticity of PVDF is also seen in dynamic mechanical analysis performed at the frequency of 1 Hz. The origin of the viscoelastic character well present in the deformability of the PVDF in service is due to the occurrence of the α_c relaxation that is active at ∼50 °C (E″ peak at 1 Hz).     

XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

Chitin characterization by SEM,FTIR, XRD,and 13C cross polarization/mass angle spinning NMR

The full characterization of chitin obtained from squid, shrimp, prawn, lobsters, and king crab is reported. Elemental analysis, including metals such as Ca, Mg, Zn, Cd, Hg, Cr, Mn, Cu, and Pb, was performed, which is quite relevant because the skeleton composition is slightly different for each species. The morphology was studied by means of TEM and their compositions were determined by energy‐dispersive X‐ray analysis. ¹³C cross polarization/magic angle spinning NMR was applied to determine the chemical shift of all the carbons and the difference between them. Chitin was isolated by using chemical methods, alternating hydrochloric acid and sodium hydroxide. The α‐chitin from shrimp, prawn, lobsters, and king crabs showed two signals at 73.7 and 75.6 ppm. Meanwhile, the β‐chitin from squid exhibited one signal at 75.2 ppm. FTIR studies were used to analyze α‐chitin from shrimp and β‐chitin from squid. The α‐chitin exhibited amide I vibration modes at 1660 and 1627 cm^?1, whereas the β‐chitin showed one band at 1656 cm^?1. X‐ray diffraction showed that α‐chitin is orthorhombic (a = 4.74 Å, b = 18.86 Å, and c = 10.32 Å) and β‐chitin had a monoclinic dihydrated form (a = 4.80 Å, b = 10.40 Å, c = 11.10 Å, and β = 97°). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1876–1885, 2004     

Influence of Alkaline Additives and Buffers on Mineral Trapping of CO2 under Mild Conditions

Carbon dioxide (CO₂) gas is the main contributor to climate change. CO₂ storage in underground brines and oil‐field brines by mineral trapping has been considered as a promising alternative in order to reduce CO₂ emissions. However, permanent storage of CO₂ in stable carbonate minerals is greatly dependent on brine pH, being favored over an alkaline pH. The effect of alkaline additives (NaOH, KOH, CaO) and buffer solutions (NaHCO₃/NaOH, Na₂HPO₄/NaOH, NH₄Cl/NH₄OH) on the mineral trapping of CO₂ under mild conditions using a synthetic brine is investigated. The results indicate that both NaOH+NH₄Cl/NH₄OH and KOH+NH₄Cl/NH₄OH mixtures promote precipitation mainly of calcium carbonate (CaCO₃).     

Removal of N‐methylpyrrolidone hydrogen‐bonded to polyaniline free‐standing films by protonation–deprotonation cycles or thermal heating

Free‐standing films of polyaniline (PANI), in an emeraldine base state, prepared by evaporation of polymer solutions in N‐methylpyrrolidone (NMP) retain solvent even under dynamic vacuum drying as indicated by transmission Fourier transform infrared (FTIR) spectroscopy, where a band at 1670 cm^?1 is clearly observed. Upon protonation–deprotonation cycles in aqueous media the weight of the dry base film decreases indicating gradual loss of NMP. Transmission FTIR spectra shows also the washing out of NMP with a clear decrease in intensity of the hydrogen‐bonded >C?O stretching band (1670 cm^?1) of NMP. During this process the bands between 3500 and 3200 cm^?1, assigned to >N? H stretching in the PANI backbone, change intensity suggesting that intermolecular hydrogen‐bonded >N? H, with carbonyl oxygen of NMP, is replaced by free >N? H. This is clear evidence of specific interaction of NMP with the emeraldine base. A similar loss of NMP is observed during heating but evidence of polymer degradation is also present. A mechanism is proposed to account for the loss of hydrogen‐bonding ability upon protonation which requires delocalization of the radical cations in the protonated films. © 2001 Society of Chemical Industry     

Variability of the Pull-off Technique for Adhesion Strength Evaluation on Ceramic Tile Claddings

The periodic assessment of claddings adhesion during the facade life cycle becomes an important preventive in-service issue. This paper discusses the pull-off test, an in-situ diagnosis technique, which characterizes the in-service performance of ceramic tile claddings, by measuring adherence resistance to tension. Adherence is one of the main required properties of external coating, not only for aesthetical reasons but also for safety purposes. Throughout this research, an experimental campaign is performed in laboratory and in-situ, analyzing the variability of the pull-off testing technique. In-situ tests have been undertaken in existing construction sites and test walls. The laboratory results were compared to the in-situ ones. Standards requirements were evaluated and different failure modes were verified. In this work the impact of several parameters is analyzed such as the use of metallic discs with different thickness levels, geometries, and dimensions; the location of the testing at different heights; and the use of different dynamometer equipment. The main conclusion of this work is in order to reduce the uncertainty of the in-service diagnosis used for decision process of facade interventions, the previous parameters should be taking into account despite pull-off being a standardized technique.