New protection method for HVDC lines including cables

For the third project of the Hokkaido-Honshu HVDC Link in Japan, called the HVDC Link III project (rated at 250 kVDC-1200 A-300 MW), we developed an HVDC transmission line protection method based on a new working principle that allows high-speed and highly sensitive detection of faults, enhancing reliability in the supply of electric power. In general, increasing the sensitivity of relays will lead to an increased likelihood of undesired operation whereas lowering the sensitivity will impair the responsiveness of the relays. Our proposed method meets these apparently incompatible requirements very well. Basically classified as a differential scheme, the HVDC transmission line protection method compensates for a charging and discharging current that flows through the line-to-ground capacitance at times of voltage variations caused by a line fault or by the operation of DC power systems. The developed protection method is also characterized in that it uses current changes induced by voltage variations to restrain the operation of a relay. This configuration has made the proposed method far superior in responsiveness and sensitivity to the conventional protection method. A simulation using an EMTP (Electro-Magnetic Transients Program) was conducted on this method. Developed relay equipment embodying the new protection method was subjected to various verification tests, where this equipment was connected to a power system simulator, before being delivered to the HVDC Link III facility     

Crosslinking of tissue-derived biomaterials in 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC)

In contrast to bifunctional reagents such as glutaraldehyde or polyfunctional reagents such as polyepoxides, carbodiimides belong to the class of zero-length crosslinkers which modify amino acid side-groups to permit crosslink formation, but do not remain as part of that linkage. The authors have compared the effects of 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and glutaraldehyde (the de facto industrial standard crosslinker) on the hydrothermal, biochemical, and uniaxial mechanical properties of bovine pericardium. EDC crosslinking was optimized for maximum increase in collagen denaturation temperature using variables of pH, concentration, and ratio of EDC to N-hydroxysuccinimide (NHS): a reagent for formation of activated esters. EDC and glutaraldehyde crosslinked materials were subjected to hydrothermal denaturation tests, biochemical degradation by enzymes (collagenase, trypsin) and CNBr, amino acid analysis for unreacted lysine, and to high strain rate mechanical tests including: large deformation stress-strain studies (0.1 to 10 Hz), stress relaxation experiments (loading time 0.1 s) and small deformation forced vibration (1 and 10 Hz). A protocol for EDC crosslinking was developed which used 1.15% EDC (2:1 EDC:NHS) at pH 5.5 for 24 h. The increase in denaturation temperature for EDC (from 69.7±1.2°C to 86.0±0.3°C) was equivalent to that produced by glutaraldehyde (85.3±0.4°C). Both treatments equivalently increased resistance to collagenase and CNBr degradation; however, after denaturation, the EDC-treated tissue was slightly more resistant to collagenase, and markedly more resistant to trypsin. EDC-treated materials were more extensible and more elastic than glutaraldehyde-treated materials. Despite the differences in crosslinking mechanism, EDC and glutaraldehyde-treated materials are very similar. Subtle but intriguing differences in biochemical structure remain to be investigated.     

Beam test of the CsI(Tl) calorimeter for the BELLE detector at the KEK-B factory

We studied the performance of a prototype electromagnetic calorimeter for the BELLE detector at the KEK proton synchrotron for an energy range of 0.25–3.5 GeV. The prototype consisted of an array of 6 × 5 CsI(Tl) crystals with 30 cm length (16.2 radiation lengths) and about 6 cm × 6 cm cross section. The scintillation light of each CsI(Tl) crystal was read out by two large-area PIN photodiodes and charge-sensitive preamplifiers attached at the rear face of the crystal. We measured the energy and position resolution for electrons and the e/π separation for two sets of matrix configurations: one corresponded to the center and the other to the edge of the barrel calorimeter. The overall performance measured by the test proves that the prototype calorimeter is satisfactory for the use in the BELLE detector.     

A quantitative approach to modeling mammalian myelinated nervefibers for electrical prosthesis design

Presents an upgraded cable model of mammalian myelinated nerve fibers in an extracellularly applied field. The kinetics of the nodes is based upon voltage clamp data in rat motor fibers at 37°C (J.R. Schwartz and G. Eikhof, 1987), while the resting membrane potential is computed with the Goldman equation. The resulting spike shape, conduction velocity, strength/duration behavior, and absolute and relative refractory period are in good quantitative agreement with published experimental data in mammals at normal body temperature and at 20°C. Results at intermediate temperatures however, suggest that the widely used concept of a constant Q₁₀ for the rate constants is invalid. In addition, the model generates realistic abortive spikes towards the end of the absolute refractory period and it can describe the consequences of repetitive firing. The results stress the advantages of a multiple nonlinear node model even if only time aspects of nerve behavior are under study. It turned out, that the model presented here describes in vivo neural properties relevant for electrical prosthesis design better than previous models in literature     

The anatomy of a consultation: a teaching method

Two dosages of Smokeless Tobacco (ST) extract were given to gravid Sprague-Dawley rats by oral gavage on gestational days (GD) 6-20. The low dosage contained ST extract equivalent to 1.33 mg/kg nicotine (STD-1), and the high dosage contained ST extract equivalent to 4.0 mg/kg nicotine (STD-2). Dams were dosed three times daily at 8 a.m., 11 a.m., and 2 p.m., thus providing total daily nicotine equivalent dosages of 4 mg/kg/day and 12 mg/kg/day. Controls received equivalent amounts of distilled water by gavage. Dams were allowed to deliver and all experimental pups were fostered to control mothers. On postnatal day 1 (PND 1) litters were culled to 4 +/- 1 females and 4 +/- 1 males. Weights, physical landmark development, and behavioral performance of pups were monitored during pre- and post-weaning periods. Behavioral tests included: surface righting, negative geotaxis, swimming development, open-field activity, active avoidance in shuttle box, and Cincinnati swimming maze. Our results show that the STD-2 dose resulted in reduced maternal weight gain. Offspring weights were reduced in a dose-related manner, with the most consistent weight deficits seen in the STD-2 group until PND29. Consistent STD-1 weight deficits were seen up to PND 8. The incidence of deaths was increased in the STD-2 dosage group. No significant treatment-related differences were observed in development of physical landmarks. Male STD-2 pups righted faster than controls, and significant differences were noted in swimming development with the STD-1 group of pups performing less effectively than controls. Activity levels, assessed during both pre- and post-weaning periods were not affected. No treatment-related differences were seen in the active avoidance shuttle box or Cincinnati swimming maze tests, which assessed learning. Female brain weights were reduced in the STD-1 treatment group.     

An investigation of seated postural stability

Results of tests undertaken to identify which measures of seated posture control are most effective in two areas, distinguishing differences in the x and y direction control strategies for a given task and distinguishing differences in overall control strategies for pairs of different tasks, are presented. The test platform, calibration tests, test protocol, and data analysis method are described. The results of statistical analyses performed on the data are summarized     

An electrical network approach to the analysis of semiconductordevices

A simple electrical network is used to represent the five differential equations describing basic phenomena in one-dimensional semiconductor devices. Both standard and integrated approaches for solving transport equations are developed. Also, an electrical network equivalent for the nonlinear Poisson equation was derived. It allows students to better understand the physical phenomena and the process of computer simulation of such semiconductor devices