Pulsed-current duty cycle dependence of electromigration-inducedstress generation in aluminum conductors

The effect of duty cycle of pulsed dc currents on the critical length-current density product, (jl_c), was measured using the Blech-Kinsbron edge-displacement technique [Thin Solid Films 25, 327 (1975)]. Unencapsulated Al edge-displacement segments mere stressed at various duty cycles and the critical lengths, the so-called “Blech lengths”, were measured. It was found that jl_c increased with decreasing duty cycle. We measured a factor of 2.6 increase in jl_c for the 25% duty cycle as compared to dc. This duty cycle dependence of Blech length implies that electromigration resistance for an integrated circuit would be increased for small duty cycle operation by increasing the fraction of interconnects which are sub-Blech-length and are not susceptible to EM damage     

Study on purple pigmentation in five cases with purple urine bag syndrome

We reported five patients with purple urine bag syndrome (PUBS). Four patients had indicanuria, and, in three of them, purple pigmentation was reproduced by inoculating urinary isolates, in the broth with indoxyl sulfate. Klebsiella pneumoniae, Pseudomonas aeruginosa and Enterococcus avium were considered to produce the purple pigment in three patients. However, attempts to reproduce the purple pigment failed in two patients, and one of them did not have indicanuria. These results suggest that indicanuria is not necessarily required for the development of PUBS.     

Pressure release of containments during severe accidents in Switzerland

As required by the Swiss Federal Nuclear Safety Inspectorate (HSK) all Switzerland's five nuclear power plants have to install a containment filtered venting system. The integrity of the containment (the last barrier for radioactive releases to the environment) can be threatened by overpressure due to inadequate heat removal. Design requirements have been provided for a specific class of severe accident scenarios. In general the capacity of the system is considered sufficient if it is able to vent the steam production corresponding to a decay heat level of 1% of the thermal reactor power. The mitigation capacity for the reduction of released radioactive material is specified by a retention factor of 1000 for aerosols to prevent or limit a long term ground contamination and a factor of 100 for elementary iodine for prevention or limiting of thyroid doses and to avoid short term evacuation. Besides existing requirements for design, maintenance and operation, additional claims such as passivity and operability at any pressure conditions inside the containment have to be met. Passivity implies that the system can be initiated after a severe accident without any operator action. The system also has to allow early manual venting. Various filtered venting systems are presently available. The nuclear power plants of Beznau, Gosgen, Leibstadt and Muhleberg have already selected such systems and already implemented them or are going to install them step by step. Beznau selected the Sulzer-EWI system which is using a water pool with nozzles-baffle plates and mixing elements to achieve the required filtration of the aerosols. In both Beznau units, the systems are installed and in standby mode. Gosgen, a pressurized water reactor as well as Beznau, is going to implement a filter system developed by Siemens-KWU, known as sliding pressure venting process, combining a venturi scrubber in a water pool and a mesh filter. The boiling water reactor of Leibstadt also selected the same system as Beznau while Müheberg choose the ABB system but not in the common design. The venturi pipes are thereby integrated in the water pool of the outer torus. The system in all five nuclear power plants is fully operable and in standby mode since December 1993.     

High-temperature,high-pressure thermophysical measurements on liquid zinc

Wire-shaped zinc samples were resistively volume heated as part of a fast-capacitor discharge circuit. Time-resolved measurements with submicrosecond resolution of the current through the specimen, the voltage drop across it, and the thermal expansion of the specimen as a function of time allow determination of the enthalpy, electrical resistivity, and density at different temperatures up to superheated liquid states of zinc far above the normal boiling point. High static pressures, up to 3800 bar of the ambient medium water, were used. An estimate of the critical pressure for zinc is given by investigations of the stability of the sample with a framing CCD camera, taking pictures of different samples varying the ambient static pressure. The critical volume and the critical temperature are obtained by means of an extrapolation of measured data at different pressures.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1995, Köln, Germany.     

Spectroscopic investigation of Nd ion in LiNbO3, MgO:LiNbO3 and LiTaO3 single crystals relevant for laser applications

The polarized absorption and luminescence properties of Nd³⁺ doped isostructural LiNbO₃, MgO:LiNbO₃ and LiTaO₃ nonlinear bulk single crystals are reported. Pump-probe experiments associated with the Judd-Ofelt approach are used to estimate two types of room temperature cross sections: polarized emission cross sections of the dominant ⁴F_3/2 → ⁴I_1//2 transition near 1085 and 1093 nm and polarized excited-state absorption cross sections in the same spectral domain and in the green spectral range corresponding to self frequency doubling. Self frequency-doubling results are also given in Nd:LiNbO₃ and Nd:MgO:LiNbO₃ versus sample temperature.     

Characterization of Failure Mechanisms of Duplex and Graded Thermal Barrier Coatings Exposed to Thermal Shock Test

The beginning of failure of a (ZrO2-7%Y2O3)/(Ni-22%Co-17%Cr-12.5%Al-0.6%Y) duplex andgraded coating systems on lnconel 617 and IN738LC in burner rig tests has been characterized.The test conditions are 40 s heating up to 75O℃ substrate temperature followed by 80 s aircooling. Failure is considered at the appearance of the first bright spot during heating period.Stresses due to thermal expansion mismatch strains on cooling are the probable cause of life-limiting in this conditions of testing.     

Microstructures of high-J c melt-textured YBa2Cu3O7−x /Ag superconductors

Silver has been previously added to the melt-textured YBa₂Cu₃O_7?x in order to increase the critical current density (J _c ) of these materials. However, the effect of this addition on theJ _c is presently unclear. The purpose of this study is to investigate the effect of silver on both critical current density and the microstructure of the melt-textured YBa₂Cu₃O_7?x superconductors by means of X-ray diffraction, optical polarized microscopy, and transmission electron microscopy (TEM). TheJ _c of the MTG YBCO/Ag samples is more than 10⁴A/cm² under the 5 kOe magnetic field. It has been shown that as the concentration of silver increases, the fraction of the 211 phase dispersed within the 123 matrix decreases. Therefore, theJ _c slightly decreases. These results, together with the effect of the 211 phase, dislocations, and other structure defects on flux pinning, are described in this paper.     

Application of multilayer feedforward neural networks toprecipitation cell-top altitude estimation

The use of passive 118-GHz O₂ observations of rain cells for precipitation cell-top altitude estimation is demonstrated by using a multilayer feedforward neural network retrieval system. Rain cell observations at 118 GHz were compared with estimates of the cell-top altitude obtained by optical stereoscopy. The observations were made with 2-4-km horizontal spatial resolution by using the millimeter-wave temperature sounder (MTS) scanning spectrometer aboard the NASA ER-2 research aircraft during the Genesis of Atlantic Lows Experiment (GALE) and the Cooperative Huntsville Meteorological Experiment (COHMEX) in 1986. The neural network estimator applied to MTS spectral differences between clouds, and nearby clear air yielded an rms discrepancy of 1.76 km for a combined cumulus, mature, and dissipating cell set and 1.44 km for the cumulus-only set. An improvement in rms discrepancy to 1.36 km was achieved by including additional MTS information on the absolute atmospheric temperature profile. An incremental method for training neural networks was developed that yielded robust results, despite the use of as few as 56 training spectra. Comparison of these results with a nonlinear statistical estimator shows that superior results can be obtained with a neural network retrieval system. Imagery of estimated cell-top altitudes was created from 118-GHz spectral imagery gathered from CAMEX, September through October 1993, and from cyclone Oliver, February 7, 1993     

38. Generalversammlung von CENELEC

Ohne Zusammenfassung