半导体量子点自组织生长的计算机模拟研究

采用平均场模型和非平均场模型对半导体量子点的自组织生长过程进行了计算机模拟研究。结果表明两种模型给出了相似的量子点的大小分布,但在平均尺寸、数量以及覆盖面积随时间的变化上存在着差别,针对这些差别给出了解释。     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系     

瓦楞纸板用抗水淀粉胶配方及性能研究

简要分析了玉米淀粉胶的组成及对其质量的影响，重点对粘合剂的防水性进行了研究，叙述了瓦楞纸板用抗水粘合剂的配制及工艺过程，并与常规方法制备的粘合剂进行了性能比较，测定了抗水时间，得出了瓦楞纸板用抗水粘合剂的最佳配制比例。     

Pad effects on material-removal rate in chemical-mechanical planarization

The role of a porous pad in controlling material-removal rate (MRR) during the chemical-mechanical planarization (CMP) process has been studied numerically. The numerical results are used to develop a phenomenological model that correlates the forces on each individual abrasive particle to the applied nominal pressure. The model provides a physical explanation for the experimentally observed domains of pressure-dependent MRR, where the pad deformation controls the load sharing between active-abrasive particles and direct pad-wafer contact. The predicted correlations between MRR and slurry characteristics, i.e., particle size and concentration, are in agreement with experimentally measured trends reported by Ouma¹ and Izumitani.²     

罐装食品用电镀锡板的耐蚀性及其试验方法

综述了影响罐装食品用电镀锡板耐蚀性能的因素及其试验方法。     

宜昌站泄流能力变化对葛洲坝设计洪水影响

宜昌水文站是葛洲坝、三峡水利枢纽的设计依据站。葛洲坝水利枢纽动工修建和运行 ,对该站水位流量关系中低水部分产生了影响。探讨了该河段泄流能力的变化对葛洲坝水利枢纽设计洪水有无影响的问题。用1 967～ 1 999年实测资料对宜昌站以汛期平均水位为参数的水位流量关系曲线簇进行了检验 ,大部分年份最大日平均流量、3、7、1 5、30d洪量的偏差在± 4 %之间 ,说明曲线簇推流具有相当的精度。证明了宜昌河段中低水泄流能力的变化对葛洲坝水利枢纽设计流量和校核流量基本没有影响     

电火花铣削钛合金加工工艺研究

在全面试验的基础上，对电火花铣削钛合金进行了初步研究，给出了电火花铣削钛合金的影响因素及其指标的关系曲线。并对其进行了数据分析。试验表明，冲油电火花铣削是加工钛合金的有效方法。     

横流均匀环境中三维线源型正负浮力射流特性研究

本文利用混合有限分析法及交错网格。对横流均匀环境中三维线源型正负浮力射流及负浮力射流的特性进行研究，分析了不同工况下流速，温度和湍动能在断面上的分布及影响射流轨迹线的因素，讨论了轨迹线上温度的变化及浮力射流的贴壁现象。对三维长线源型负浮力射流，分析了流速比，喷口弗汝德数对负浮力射流的影响。     

Manufacture of carbon fibers from polyacrylonitrile precursors treated with CoSO4

Free‐radical solution copolymerization of itaconic acid and acrylonitrile was carried out in DMSO using azodiisobutyronitrile as an initiator, changing the feed rate of itaconic acid. The resulting polymerization solution was spun to form polyacrylonitrile (PAN) precursors of carbon fibers. The precursors were treated with a CoSO₄ aqueous solution on‐line. The structure and properties of untreated and treated PAN precursors and the resultant carbon fibers were characterized by SEM and TEM, a stabilization process, etc. It is suggested that CoSO₄ acts as a catalyst in the formation of a ladder structure and reduces the temperature of cyclization, and the carbon fibers developed from treated PAN fibers showed improvement in the tensile strength and the Young's modulus. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 153–158, 2002     

YAG激光熔覆的研究现状与发展趋势

本文介绍了YAG激光熔覆的特点，并与CO2激光进行了比较，显示了YAG激光熔覆的优势和潜力。叙述了YAG激光熔覆的研究进展及其应用前景。