Heat conduction by liquid helium II in capillary tubes. IV. Mutual friction under pressure

We report measurements of supercritical heat conduction in liquid helium II at pressures above the vapor pressure. The measurements were made in glass capillary tubes of diameter 50.5 and 366.8 m in the temperature range from 1.2 to 2.1 K. As in our previous results at the vapor pressure, a clear distinction can be made between two regimes in which the average separation of vortex lines is either comparable with or larger than the size of the flow channel. In the wider tube, at high relative velocities v between the superfluid and normal component, where the vortex spacing is small, a modified form of Gorter-Mellink mutual friction F _sn is observed which varies as F_sn=A_snv(v–v₀)². The coefficient A increases with pressure, and its variation with T/T(p) is in fairly good agreement with Schwarz ' microscopic theory of superfluid turbulence. However, the absolute magnitude of A is in general larger than in Schwarz ' theory and also larger than most other experimental values. In the narrower tube the measurements are all in the regime where the vortex spacing is comparable with the tube size, and they do not agree with the predictions of the Gorter-Mellink law. At present, the data cannot be analyzed quantitatively in the terms of the vortex line density, because B, the vortex line scattering coefficient, is not known at high pressures.Preparation of this paper was supported by a U.S. National Science Foundation grant DMR 7901073 and by a UK Science Research Council Senior Fellowship (DFB).SRC Senior Fellow.     

Experimental automobile-pedestrian injuries

Fifteen fresh cadaver impacts were conducted in simulation of pedestrian-automobile accidents. The test sled configuration simulated an automobile bumper and hood in "standard" and "nosedive" situations as well as "hard" and "soft" impact surfaces. Instrumentation and film demonstrated large axial compression forces in the struck leg and considerable angular velocity of the torso in all modes. Dissection revealed primary injury at the impact site at low velocities with added remote injury at high velocities. Fracture of the lateral tibial plateau was most common. Lowering the bumper height offered the greatest protection against injury at moderate impact velocities.     

Eyewitness Identification Accuracy and Response Latency: The Unruly 10-12-Second Rule.

Data are reported from 3,213 research eyewitnesses confirming that accurate eyewitness identifications from lineups are made faster than are inaccurate identifications. However, consistent with predictions from the recognition and search literatures, the authors did not find support for the "10-12-s rule" in which lineup identifications faster than 10-12 s maximally discriminate between accurate and inaccurate identifications (D. Dunning & S. Perretta, 2002). Instead, the time frame that proved most discriminating was highly variable across experiments, ranging from 5 s to 29 s, and the maximally discriminating time was often unimpressive in its ability to sort accurate from inaccurate identifications. The authors suggest several factors that are likely to moderate the 10-12-s rule. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Image segmentation for improved consistency in image-interpretation of opium poppy

The image-interpretation of opium poppy crops from very high resolution satellite imagery forms part of the annual Afghanistan opium surveys conducted by the United Nations Office on Drugs and Crime and the United States Government. We tested the effect of generalization of field delineations on the final estimates of poppy cultivation using survey data from Helmand province in 2009 and an area frame sampling approach. The sample data was reinterpreted from pan-sharpened IKONOS scenes using two increasing levels of generalization consistent with observed practice. Samples were also generated from manual labelling of image segmentation and from a digital object classification. Generalization was found to bias the cultivation estimate between 6.6% and 13.9%, which is greater than the sample error for the highest level. Object classification of image-segmented samples increased the cultivation estimate by 30.2% because of systematic labelling error. Manual labelling of image-segmented samples gave a similar estimate to the original interpretation. The research demonstrates that small changes in poppy interpretation can result in systematic differences in final estimates that are not included within confidence intervals. Segmented parcels were similar to manually digitized fields and could provide increased consistency in field delineation at a reduced cost. The results are significant for Afghanistan’s opium monitoring programmes and other surveys where sample data are collected by remote sensing.     

Extraction,optimisation and characterisation of phenolics from Thymus vulgaris L.: phenolic content and profiles in relation to antioxidant,antidiabetic and antihypertensive properties

The objectives of this study were to examine varying extraction conditions of Thymus vulgaris L. as related to phenolic content and profiles of the extracts and their antioxidant, antihypertensive and antidiabetic properties. Phenolics were extracted under various conditions pertaining to free and bound phenolics, solvent type and combination of extraction time and temperature, and these extracts were evaluated in terms of their antioxidant activities and inhibitory activities of angiotensin‐converting enzyme (ACE), α‐glucosidase and α‐amylase. The acetone–water solvent mixture (1:1; v/v) produced the extract with the greatest phenolic content, antioxidant activity and inhibitory activities of ACE and α‐glucosidase. The optimal extraction temperature for maximum phenolic content and antioxidant activity associated with methanol extraction was 60 °C, whereas a lower temperature at 40 °C was required to maximise inhibitory activities for ACE, α‐glucosidase and α‐amylase. An inverse relationship was seen between antioxidant and glucosidase inhibitory activities vs. the ACE and α‐amylase inhibitory activities, which suggests the need for extractions to be directed to specific bioactivities of thyme extracts. Generally, the results indicate major differences in phenolic profiles among the tested extraction conditions with thymol as the predominant phenolic seen in most extractions, while gallic acid, rosmarinic acid or diosmin also predominated in other extracts. Extracts with the same predominant phenolic compound and similar phenolic content showed major disparities in their ACE, glucosidase and α‐amylase inhibitory activities, indicating that the major phenolic profiles of thyme extracts may not be necessarily related to the degree of inhibition of ACE, glucosidase and α‐amylase enzymes.     

Oxidative stability of olive oil during the thermal process: Effect of Pistacia khinjuk fruit oil

The oxidative stability of refined olive oil with incorporated Pistacia khinjuk fruit oil (PKFO; 0.5%, 1%, 2%, 5%, and 10%) during thermal processing at 170ºC for 8 h was evaluated. The conjugated diene values, carbonyl values, acid values, oil/oxidative stability indices, and total tocopherol content were measured during thermal processing. Olive oil containing 0.5% PKFO was identified as the most oxidative stable oil followed by oils containing 100 ppm TBHQ and 1, 5, 10, and 2% PKFO. No significant difference between samples of olive oil containing 100 ppm TBHQ and 1% PKFO was observed. Thus, it was concluded that PKFO at levels lower than 1% could provide stronger antioxidation activity in comparison with TBHQ (the strongest syntactic antioxidant used in the food industry). Moreover, reduction in tocopherol compounds during thermal processing was higher in olive oil containing TBHQ as compared to those in pure olive oil.     

Prediction of simultaneous contrast between map colors with Hunt's model of color appearance

The objective of this research was development of a quantitative model of simultaneous contrast (induction) to aid selection of sets of easily identified map colors. The model is an extension of R. W. G. Hunt's model of color appearance. Contrasts between central and proximal colors were used to adjust Hunt's lightness, relative redness-greenness, and relative yellowness-blueness measures. Human subject responses to CRT displays in an experiment were analyzed to produce a set of rules for selecting map colors. Rather than predict average perceptions for central/proximal color combinations, acknowledgment was made of the inherent variability in map readers' perceptions of color by developing generalized perception buffers that accounted for at least 90% of test subject responses. The task of selecting colors that will not be confused once they appear with numerous proximal colors on a map thus becomes a task of selecting colors that do not have buffers that overlap in color space. © 1996 John Wiley & Sons, Inc.     

Postmortem pH, Muscle, and Refrigerated Storage Effects on Ability of Vacuum-Packaged Pork to Bloom

ABSTRACT: Effects of pH, muscle, and storage time on the ability of vacuum-packaged pork chops to bloom were investigated. Low pH samples exhibited more change in color measures during the 30 min blooming period than did the medium and high pH samples. The low pH sample bloomed more rapidly and to a greater extent than medium and high pH samples. Among the 3 muscles, Longissimus had the highest, while Semimembranosus had the lowest a^* value and hue angle changes. Overall, refrigerated storage of vacuum packaged pork for 7 d or more resulted in more efficient blooming when pH was low. The ability of vacuum-packaged pork to rebloom is necessary for the meat to regain the consumer-expected pink-red color after opening the vacuum bag.     

Excitation control design of local machines in a large-scale power system by using dynamic equivalencing technique

A linear optimal control design for machine excitation is developed to improve the local system stability in a large-scale power system. Dynamic equivalents for the external system are used to provide the controller with information about the original external system. The paper investigates whether external system information helps the controller to stabilize the local system and whether the dynamic equivalents are a reliable source of that information. The validity and accuracy of the proposed method is demonstrated by simulated tests on two sample power systems.     

The case for technology in developing regions

Alongside good governance, technology is considered among the greatest enablers for improved quality of life. However, the majority of its benefits have been concentrated in industrialized nations and therefore limited to a fraction of the world's population. We believe that technology has a large role to play in developing regions, that "First World" technology to date has been a poor fit in these areas, and that there is thus a need for technology research for developing regions. Despite the relative infancy of technology studies in developing regions, anecdotal evidence suggests that access to technology has a beneficial economic impact. Cellular telephony is probably the most visible application, but there are many others, some of which we cover in this article. The World Bank's infoDev site catalogs hundreds of information and communications technologies (ICT) projects, albeit not all successful. Most of these projects use existing off-the-shelf technology designed for the industrialized world. Although it is clear that there are large differences in assumptions related to cost, power, and usage, there has been little work on how technology needs in developing regions differ from those of industrialized nations. We argue that Western market forces continue to meet the needs of developing regions accidentally at best.