Metallurgical Investigation of a Prematurely Failed Concentric Reducer Tube Used in a Hot-Rolling Mill

A concentric reducer tube, which was a part of the top exit roughing hydraulic descaler in a hot strip mill failed prematurely under working pressure. A detailed metallurgical investigation comprising physical examination, optical microscopy, scanning electron microscopy, and electron probe microanalysis was carried out to find out the genesis of the failure. Physical examination revealed cracks located symmetrically around the circumference of the tube that ran along its full length, up to the weld beads at both ends. Optical microscopy of etched samples revealed a banded ferrite-pearlite structure and the existence of forging folds near the change-in-section(160° fillets). Cracks were found to initiate from these forging folds. No structural abnormalities were found in the weld beads and heat-affected zones.     

Recommendations for the prevention of coronary artery disease in Asians: a scientific statement of the International College of Nutrition

PURPOSE: Two types of glass wool were used to remove leukocytes in semen for evaluation of reactive oxygen species production by spermatozoa in oligozoospermic patients with leukocytospermia. METHODS: Semen samples were prepared using fine-structure glass wool (SpermFertil) and coarse-structure glass wool. In each treatment group, native semen was evaluated for sperm concentration, percentage motility, viability, leukocyte concentration, and production of reactive oxygen species. RESULTS: Electron microscopically, SpermFertil showed a higher number of leukocytes attached to the fibers compared to coarse-structure glass wool. Leukocytes in native semen and after glass wool filtration as determined by peroxidase cytochemistry confirmed this observation. Reactive oxygen species decreased from 45.303 counts/10(7) viable cells in native semen to 15.806 counts/10(7) cells in coarse structure wool and 7.465 counts/10(7) cells in Spermfertil, respectively. CONCLUSIONS: Removal of leukocytes from semen of oligozoospermic patients by means of glass wool filtration is a useful method to distinguish production of reactive oxygen species by leukocytes versus sperm cells.     

Activated partial thromboplastin time and outcome after thrombolytic therapy for acute myocardial infarction: results from the GUSTO-I trial

BACKGROUND: Although intravenous heparin is commonly used after thrombolytic therapy, few reports have addressed the relationship between the degree of anticoagulation and clinical outcomes. We examined the activated partial thromboplastin time (aPTT) in 29,656 patients in the Global Utilization of Streptokinase and t-PA for Occluded Coronary Arteries (GUSTO-I) trial and analyzed the relationship between the aPTT and both baseline patient characteristics and clinical outcomes. METHODS AND RESULTS: Intravenous heparin was administered as a 5000-U bolus followed by an initial infusion of 1000 U/h, with dose adjustment to achieve a target aPTT of 60 to 85 seconds. aPTTs were collected 6, 12, and 24 hours after thrombolytic administration. Higher aPTT at 24 hours was strongly related to lower patient weight (P < .00001) as well as older age, female sex, and lack of cigarette smoking (all PT< .0001). At 12 hours, the aPTT associated with the lowest 30-day mortality, stroke, and bleeding rates was 50 to 70 seconds. There was an unexpected direct relationship between the aPTT and the risk of subsequent reinfarction. There was a clustering of reinfarction in the first 10 hours after discontinuation of intravenous heparin. CONCLUSIONS: Although the relationship between aPTT and clinical outcome was confounded to some degree by the influence of baseline prognostic characteristics, aPTTs higher than 70 seconds were found to be associated with higher likelihood of mortality, stroke, bleeding, and reinfarction. These findings suggest that until proven otherwise, we should consider the aPTT range of 50 to 70 seconds as optimal with intravenous heparin after thrombolytic therapy.     

Enumeration of minimal cutsets from matrix representation of directed/undirected networks

This paper describes an algorithm for finding the minimal cutsets between a specified source and terminal nodes of directed/undirected networks. Adjacent nodes of a source node/merged node are determined by the collection of node numbers of columns corresponding to non-zero elements of the first row of the adjacency matrix to form the reduced adjacency matrix (RAM) corresponding to merged nodes. Connectivity of RAM has been checked to obtain the minimal cutsets.     

Sintering study of calcium aluminate

Measurement of the initial sintering shrinkage of CaAl₂O₄ at temperatures of 1300, 1325 and 1350 °C are reported. The particle sizes chosen were –53 + 45, –63 + 53 and –75 + 63 microns and the soaking periods were from 15 to 360 min. A time dependence of the shrinkage has shown that volume diffusion is the dominant mechanism of sintering. At any given time and temperature, the per cent shrinkage was found to be a decreasing function of particle size. The activation energy for the sintering of CaAl₂O₄ was found to be 766.38 KJ mol^–1.     

Evaluation of rainfall networks using entropy: II. Application

This paper, the second in the series, applies the entropy approach to space and time evaluation of rainfall networks in Louisiana. The evaluation is made for five sampling intervals: daily, 2-day, weekly, monthly, and yearly, and for two separate seasons. In each case, the best combination of raingages is suggested and the lines of equal information (isoinformation contours) are constructed showing the areas of greater or less information transfer. The isoinformation lines are especially suitable in decisions concerning the expansion of the existing network or deleting the unnecessary raingages.