Rejoinder to “Multiple versions of the h-index: cautionary use for formal academic purposes”

Scientometrics - In a Letter to the Editor, the authors of this paper show, to highlight the practical risks of using the h-index, how academics’ data and bibliometric information can be...     

New modified Nafion-bisphosphonic acid composite membranes for enhanced proton conductivity and PEMFC performance

Proton exchange membranes remain a crucial material and a key challenge to fuel cell science and technology. In this work, new Nafion membranes are prepared by a casting method using aryl- or azaheteroaromatic bisphosphonate compounds as dopants. The incorporation of the dopant, considered at 1 wt% loading after previous selection, produces enhanced proton conductivity properties in the new membranes, at different temperature and relative humidity conditions, in comparison with values obtained with commercial Nafion. Water uptake and ionic exchange capacity (IEC) are also assessed due to their associated impact on transport properties, resulting in superior values than Nafion when tested in the same experimental conditions. These improvements by doped membranes prompted the evaluation of their potential application in fuel cells, at different temperatures. The new membranes, in membrane-electrode assemblies (MEAs), show an increased fuel cell maximum power output with temperature until 60 °C or 70 °C, followed by a decrease above these temperatures, a Nafion-like behaviour when measured in the same conditions. The membrane doped with [1,4-phenylenebis(hydroxymethanetriyl)]tetrakis(phosphonic acid) (BP2) presents better results than Nafion N-115 membrane at all studied temperatures, with a maximum power output performance of ～383 mW cm^?2 at 70 °C. Open circuit potentials of the fuel cell were always higher than values obtained for Nafion MEAs in all studied conditions, indicating the possibility of advantageous restrain to gas crossover in the new doped membranes.     

Parametric Study on the Interface Layer of Renovation Solutions for Orthotropic Steel Bridge Decks

Abstract: The article presents renovation solutions for orthotropic steel bridge decks consisting of bonding a second steel plate to the existing steel deck in order to reduce the stresses and enlarge the life span of the orthotropic bridge deck. Two solutions for the interface layer between the existing deck plate and the second steel plate are presented: thin epoxy (bonded system) and thick polyurethane (sandwich system). A parametric study based on analytical solutions is carried out on flexural behavior of beams representing the renovation solutions. The influence of geometrical, mechanical and structural parameters on the stiffness and stress reduction factor of the system is studied. Maximum values of stiffness and stress reduction are achieved when maximizing the interface layer thickness and minimizing the second steel plate thickness with in certain practical limits. Based on the weight restrictions one can choose the most efficient interface layer regarding thickness and mechanical properties.     

A feasibility study of Lactobacillus plantarum in fruit powders after processing and storage

The aim of this study was to develop fruit powders (apple, banana and strawberry) enriched with a probiotic strain (Lactobacillus plantarum 299v). Two methodologies were proposed: (i) drying of the fruit with probiotic culture incorporated (by convection) or (ii) drying of fruit (by convection) and addition of spray‐dried probiotic culture. In the first methodology, processing caused a notable reduction in probiotic viable counts in apple, but this reduction was lower during drying of banana and strawberry. A large reduction in viable cells was also recorded during storage. In the second methodology, the survival of L. plantarum 299v was considerably higher during spray‐drying, and fruit powders with a microbial content suitable for a probiotic food (10⁸–10⁹ cfu g^?1) were obtained. The fruit powders incorporating L. plantarum 299v can be stored at 4 °C or at room temperature, for at least 3 months. This preliminary study demonstrated that fruit powders are good carriers of probiotic cultures, but the techniques used to produce them should be carefully considered.     

Fuzzy methodology for frequency response estimation of uncertain dynamic systems

Fuzzy frequency response: definition and analysis for uncertain dynamic systems is proposed in this paper. In terms of transfer function, the uncertain dynamic system is partitioned into several linear sub‐models and organized according to Takagi–Sugeno fuzzy representation. The main contribution of this paper is to demonstrate through the proposal of a Theorem that fuzzy frequency response is a boundary in the magnitude and phase Bode plots. Low‐ and high‐frequency analysis of fuzzy dynamic model is obtained by varying the frequency ω from zero to infinity. Copyright © 2011 John Wiley & Sons, Ltd.     

A two-way coupled multiscale model for predicting damage-associated performance of asphaltic roadways

This paper presents a quasi-static multiscale computational model with its verification and rational applications to mechanical behavior predictions of asphaltic roadways that are subject to viscoelastic deformation and fracture damage. The multiscale model is based on continuum thermo-mechanics and is implemented using a finite element formulation. Two length scales (global and local) are two-way coupled in the model framework by linking a homogenized global scale to a heterogeneous local scale representative volume element. With the unique multiscaling and the use of the finite element technique, it is possible to take into account the effect of material heterogeneity, viscoelasticity, and anisotropic damage accumulation in the small scale on the overall performance of larger scale structures. Along with the theoretical model formulation, two example problems are shown: one to verify the model and its computational benefits through comparisons with analytical solutions and single-scale simulation results, and the other to demonstrate the applicability of the approach to model general roadway structures where material viscoelasticity and cohesive zone fracture are involved.     

A PROMETHEE-based approach to portfolio selection problems

In this paper, we study the use of PROMETHEE outranking methods for portfolio selection problems. Starting from a new formulation of the PROMETHEE V method, we develop several alternative approaches based on the concepts of boundary portfolios and c-optimal portfolios. The proposed methods are compared in an extensive computational study. Results of these experiments show that methods based on the concept of c-optimal portfolios provide a good approximation to the (often computationally untractable) PROMETHEE ranking of all portfolios, while requiring only small computational effort even for large problems. For smaller problems, a PROMETHEE ranking of all boundary portfolios can be performed and provides a close approximation of the total ranking.     

Encapsulationof lycopene from watermelon in calcium‐alginate microparticles using an optimised inverse‐gelation method by response surface methodology

Lycopene exhibits strong antioxidant activity due to its unsaturated molecular bonds, which also contributes to its susceptibility for degradation. Encapsulation techniques can reduce lycopene degradation, increasing its potential applications in functional foods and nutraceuticals. The objective of this study was to optimise the encapsulation of lycopene from watermelon in alginate microparticles using the inverse gelation method. Box–Behnken design was used for the optimisation of three variables: concentrations of alginate (w/v %) and CaCl₂ (g L^?1), and gelation time (min). Two types of alginate were investigated (low viscosity and high viscosity) and optimised separately using encapsulation efficiency and loading capacity as responses. Results indicated that the models had a good fit to the experimental data and the optimal conditions varied depending on the type of alginate. In general, particles prepared with low‐viscosity alginate exhibited higher encapsulation efficiency and loading capacity and could be used for further research.     

Determination of emotional content of video clips by low-level audiovisual features

Affective analysis of video content has greatly increased the possibilities of the way we perceive and deal with media. Different kinds of strategies have been tried, but results are still opened to improvements. Most of the problems come from the lack of standardized test set and real affective models. In order to cope with these issues, in this paper we describe the results of our work on the determination of affective models for evaluation of video clips using audiovisual low-level features. The affective models were developed following two classes of psychological theories of affect: categorial and dimensional. The affective models were created from real data, acquired through a series of user experiments. They reflect the affective state of a viewer after watching a certain scene from a movie. We evaluate the detection of Pleasure, Arousal and Dominance coefficients as well as the detection rate of six affective categories. For this end, two Bayesian network topologies are used, a Hidden Markov Model and an Autoregressive Hidden Markov Model. The measurements were done using audio-only models, video-only models and fused models. Fusion is done using two different methods, a Decision Level Fusion and Feature Level Fusion. All tests were conducted using localized affective models, both categorial and dimensional. Results are presented in terms of detection rate and accuracy for affective families, affective dimensions and probabilistic networks. Arousal was the best detected dimension, followed by dominance and pleasure.