Design of whey protein nanostructures for incorporation and release of nutraceutical compounds in food

Whey proteins are widely used as nutritional and functional ingredients in formulated foods because they are relatively inexpensive, generally recognized as safe (GRAS) ingredient, and possess important biological, physical, and chemical functionalities. Denaturation and aggregation behavior of these proteins is of particular relevance toward manufacture of novel nanostructures with a number of potential uses. When these processes are properly engineered and controlled, whey proteins may be formed into nanohydrogels, nanofibrils, or nanotubes and be used as carrier of bioactive compounds. This review intends to discuss the latest understandings of nanoscale phenomena of whey protein denaturation and aggregation that may contribute for the design of protein nanostructures. Whey protein aggregation and gelation pathways under different processing and environmental conditions such as microwave heating, high voltage, and moderate electrical fields, high pressure, temperature, pH, and ionic strength were critically assessed. Moreover, several potential applications of nanohydrogels, nanofibrils, and nanotubes for controlled release of nutraceutical compounds (e.g. probiotics, vitamins, antioxidants, and peptides) were also included. Controlling the size of protein networks at nanoscale through application of different processing and environmental conditions can open perspectives for development of nanostructures with new or improved functionalities for incorporation and release of nutraceuticals in food matrices.     

Modelling Gas Transmission in Cylindrical Dynamic Accumulation Oxygen Transmission Rate Chambers to Explore Implications of Oxygen Sensor Location Relative to Samples

A model was developed to simulate oxygen accumulation in space and time within cylindrical dynamic accumulation chambers that are used to measure oxygen transmission rate (OTR) of materials. The model is based on Fick's law of diffusion and was validated against actual OTR measurements of polymer film samples. Measured OTR values and thicknesses were inputted into the model and oxygen concentrations outputted by the model. OTRs determined from the output of the model was in close agreement to within 0.3–3% of the measured OTR. Oxygen concentration versus time curves generated from model output oxygen concentrations and experimentally measured oxygen concentrations for three actual films were also in agreement. The model was then used to simulate results from three hypothetical test films at varying chamber lengths in order to evaluate effects of accumulation chamber dimensions relative to films on resulting OTR measurements. A typical design scenario was used, where the oxygen sensor is mounted on the chamber wall opposite the sample film. Results demonstrate that dynamic accumulation OTR instrument designers have considerable flexibility in choosing accumulation chamber dimensions because deviations in OTR are only expected to occur at impractically extreme chamber lengths (>10 m) for the entire envelope of OTRs expected for typical packaging films. Copyright © 2014 John Wiley & Sons, Ltd.     

Project design abacus for wall base ventilation drying systems to control dampness

Dampness is an important degradation issue especially in old buildings and monumental heritage, particularly a rising one as the result of capillary movement of water in the lower sections of walls and other ground-supported structures by capillary action. There are several methods to treat this kind of dampness among which is the wall base hygro-regulated ventilation system an interesting solution for high thick walls with considerable heterogeneity.

A significant number of studies have been undertaken around this method which have been implemented and validated in several heritage buildings. Such achievement has led to the adoption of the HUMIVENT patent system which aims to increase evaporation through peripheral channels on the base of the ventilated walls. A pre-sizing design program was also created and was called HUMIVENT PREDIM.

This study aims to develop a set of auxiliary abacus for pre-sizing wall base ventilation systems. This approach aims to provide fast and expeditious systems sizing in the design and rehabilitation project offices. It allows an easy awareness in the several parameters that influence the wet front and the preliminary ventilation system design. It is a very useful tool for designers allowing them to obtain pre-sizing without extensive knowledge of the program and the associated parameters and with quick understanding of the drying process optimization. For better awareness of the abacus’ potentiality and use, an application example is provided thereof. It is concluded that the abacus can straightforwardly be used for sensitivity studies and for the selection of the best solution in each case.     

A Quinacrine Analogue Selective Against Gastric Cancer Cells: Insight from Biochemical and Biophysical Studies

One of the earliest synthetic antimalarial drugs, quinacrine, was recently reported as interesting for the treatment of acute myeloid leukemia. Inspired by this and similar findings, we evaluated a set of quinacrine analogues against gastric (MKN‐28), colon (Caco‐2), and breast (MFC‐7) cancer cell lines and one normal human fibroblast cell line (HFF‐1). All the compounds, previously developed by us as dual‐stage antimalarial leads, displayed antiproliferative activity, and one of the set stood out as selective toward the gastric cancer cell line, MKN‐28. Interestingly, this compound was transported across an in vitro MKN‐28 model cell line in low amounts, and approximately 80 % was trapped inside those cells. Nuclear targeting of the same compound and its interactions with calf thymus DNA were assessed through combined fluorescence microscopy, spectroscopy, and calorimetry studies, which provided evidence for the compound's ability to reach the nucleus and to interact with DNA.     

The Impact of Polyoxyethylene Sorbitan Surfactants in the Microstructure and Rheological Behaviour of Emulsions Made With Melted Fat From Cupuassu (<Emphasis Type="Italic">Theobroma grandiflorum</Emphasis>)

Cupuassu fat is a good candidate for partial substitution of cocoa butter in many products, including emulsions. However, for such use it is necessary to know the characteristics of the products prepared with cupuassu fat. Therefore, the main goal of this work is to characterize emulsions prepared with cupuassu fat using the surfactants Tween^® 60, Tween^® 80 and Tween^® 85 as emulsifiers. The emulsions were prepared at 43 °C with addition of 0.5 or 1.5 % (w/v) of surfactant and compared with an emulsion without surfactant. All emulsions were analysed by conductivity, stability, pH, optical microscopy, rheology and oxidative stability. It was verified that the emulsions prepared with Tween^® 60 and Tween^® 80 have higher stability, smaller droplet size and higher apparent viscosity. Also, these properties are positively influenced by the concentration of the surfactant. On the other hand, emulsions prepared with Tween 85 or without surfactant reached unsatisfactory results. The rheological behaviour of the emulsions was adequately described by both Herschel-Bulkley and Mizhari-Berki models revealing pseudoplastic character. These emulsions also present strong gel behaviour, with storage modulus higher than loss modulus. In conclusion, cupuassu fat can be used as oil phase for emulsions products and this characterization helps to understand their behaviour in order to increase their use in food industry.     

Hyperbranched polyglycerols,obtained from environmentally benign monomer,as reactive clays inhibitors for water‐based drilling fluids

To prevent the degradation of the borehole and also the disintegration and dispersion of drilled cuttings, different shale stabilizing additives are used in water‐based drilling fluids (WBFs). Glycols, poly(ethylene glycol), glycerols, and polyglycerol derivatives, also called polyols, have been used to inhibit shales containing reactive clays in WBF. These additives are normally used in conjunction with KCl to reduce clay swelling and dispersion of drilled cuttings. Highly branched polymers have become an important field in current polymer science. Such materials typically exhibit compact, globular structures in combination with an exceptionally high number of sites with functional groups. They have unique properties that differ significantly from their linear counterparts, and the hyperbranched polyglycerol (hPG) is an important hyperbranched polymer that can be produced from an environmentally benign monomer, the glycerol carbonate. In this article, the clay inhibitive properties of hPG were evaluated by different test methods including bentonite inhibition test, cuttings recovery, and X‐ray diffraction measurements. The results show that the hPG has a great potential to be used as an environmental friendly inhibitor additive in WBFs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40384.     

From Molecules to Behavior in Long-Term Inorganic Mercury Intoxication: Unraveling Proteomic Features in Cerebellar Neurodegeneration of Rats

Mercury is a severe environmental pollutant with neurotoxic effects, especially when exposed for long periods. Although there are several evidences regarding mercury toxicity, little is known about inorganic mercury (IHg) species and cerebellum, one of the main targets of mercury associated with the neurological symptomatology of mercurial poisoning. Besides that, the global proteomic profile assessment is a valuable tool to screen possible biomarkers and elucidate molecular targets of mercury neurotoxicity; however, the literature is still scarce. Thus, this study aimed to investigate the effects of long-term exposure to IHg in adult rats’ cerebellum and explore the modulation of the cerebellar proteome associated with biochemical and functional outcomes, providing evidence, in a translational perspective, of new mercury toxicity targets and possible biomarkers. Fifty-four adult rats were exposed to 0.375 mg/kg of HgCl₂ or distilled water for 45 days using intragastric gavage. Then, the motor functions were evaluated by rotarod and inclined plane. The cerebellum was collected to quantify mercury levels, to assess the antioxidant activity against peroxyl radicals (ACAPs), the lipid peroxidation (LPO), the proteomic profile, the cell death nature by cytotoxicity and apoptosis, and the Purkinje cells density. The IHg exposure increased mercury levels in the cerebellum, reducing ACAP and increasing LPO. The proteomic approach revealed a total 419 proteins with different statuses of regulation, associated with different biological processes, such as synaptic signaling, energy metabolism and nervous system development, e.g., all these molecular changes are associated with increased cytotoxicity and apoptosis, with a neurodegenerative pattern on Purkinje cells layer and poor motor coordination and balance. In conclusion, all these findings feature a neurodegenerative process triggered by IHg in the cerebellum that culminated into motor functions deficits, which are associated with several molecular features and may be related to the clinical outcomes of people exposed to the toxicant.     

The effect of bovine milk lactoferrin on human breast cancer cell lines

The evidence that biologically active food components are key environmental factors affecting the incidence of many chronic diseases is overwhelming. However, the full extent of such components in our diet is unknown, as is our understanding of their mechanisms of action. Beyond the interaction of these food components with the gut and intestinal immune functions, whey proteins such as lactoferrin are being tested as anticancer agents. Lactoferrin is an iron-binding protein that has been reported to inhibit several types of cancer. In the present work, the effects of bovine milk lactoferrin on human breast cancer HS578T and T47D cells were studied. The cells were either untreated or treated with lactoferrin concentrations ranging from 0.125 to 125 μM. Lactoferrin decreased the cell viability of HS578T and T47D by 47 and 54%, respectively, and increased apoptosis about 2-fold for both cell lines. Proliferation rates decreased by 40.3 and 63.9% for HS578T and T47D, respectively. For the T47D line, cell migration decreased in the presence of the protein. Although the mechanisms of action are not fully known, the results gathered in this work suggest that lactoferrin interferes with some of the most important steps involved in cancer development.     

Chitosan biobased and intelligent films: Monitoring pH variations

Many factors can influence the shelf-life product, such as pH, water activity, nutrient levels available oxygen, etc. Variations in food pH could occur due to microorganism growth and chemical reactions that may impact flavour, consistency and shelf-life. The objective of this paper was to obtain and characterize the fast pH-colourimetric indicator device, applying a simple manufacturing technique, using food grade and biodegradable materials. The intelligent film was based on natural compounds as chitosan and anthocyanin (pH-colourimetric indicator). Chitosan intelligent films (C-ATH, 2.0 g/100 g) were obtained incorporating anthocyanin (1.0 g/100 g) in matrix films. Initially, a dark violet colour was observed in chitosan films dried. When immersed in different pH buffers, the colour range of the films varied from pink (in acid pH) to bluish-green (in neutral pH) and to violet (in basic pH). The water solubility and water vapour transmission rate of C-ATH were decreased to 60% and 48%, respectively, as compared to control film (CF, without indicator). The mechanical properties such as tensile strength and rigidity were maintained, and the elongation at break was reduced to 47% compared to CF. The advantages of this system were the simple manufacturing process, biodegradability and usage of natural and safe compounds.