Comparison of autochthonous and allogeneic breast-tumour cells in tests for lymphocyte immunity to human tumours

Lymphocytes from 10 patients with breast carcinoma were seeded in autologous serum, on autochthonous tumour cells and allogeneic tissue-cultured breast tumour cell lines. In 4 patients, the anti-tumour cell cytotoxicity against at least one of 3 breast tumour cell lines differed significantly from that against autochthonous tumour cells. Further study of these 4 individuals (using their previously frozen lymphoid cells and sera) showed that these differences occurred because serum which decreased ("blocked") lymphocyte anti-tumour cytotoxicity when applied to one tumour cell line, could either have no effect or potentiate it when applied to another, without any consistent pattern vis-à-vis target-cell susceptibility to these different humoral effects.     

Brain-computer interface research at the Wadsworth Center.

Studies at the Wadsworth Center over the past 14 years have shown that people with or without motor disabilities can learn to control the amplitude of mu or beta rhythms in electroencephalographic (EEG) activity recorded from the scalp over sensorimotor cortex and can use that control to move a cursor on a computer screen in one or two dimensions. This EEG-based brain-computer interface (BCI) could provide a new augmentative communication technology for those who are totally paralyzed or have other severe motor impairments. Present research focuses on improving the speed and accuracy of BCI communication.     

Comparison of Particle Number Counts Measured with an Ink Jet Aerosol Generator and an Aerodynamic Particle Sizer

Aerodynamic particle sizer (APS) users typically calibrate the particle sizing capabilities, but not the counting efficiency upon which aerosol concentration results are based. Herein, comparisons were made between the counts provided by an ink jet aerosol generator (IJAG) with those measured by an APS. Near-monodisperse (geometric standard deviation of about 1.06) liquid or solid aerosols in the size range of 0.95 to 13.3 μm aerodynamic diameter (AD) generated with an IJAG were released into the inner inlet-tube of the APS in a manner that rendered APS wall and aspiration losses negligible. For most experiments, the IJAG generated 75 particles/s, which rate was maintained by the IJAG system through control of electrical pulses applied to its ink jet cartridge. For particles in the size range of 2–13.3 μm AD, the ratio of relative detection efficiency (ratio of the number of particles counted by the APS to the number reported as generated by the IJAG) was 99.3 ± 1.4%; however, for test particles between 0.95 and 2 μm AD, the relative detection efficiency was somewhat lower, but the drop off was less than about 2%. This slight drop off is likely associated with the light scattering detection approach and corresponding counting algorithm of the APS. Tests were conducted where the IJAG produced 7.0 μm AD particles at rates of 1 to 500 s^-1 and the results showed essentially a 1:1 correspondence between IJAG and APS counts. The presence of smaller-sized background particles did not affect the measured APS counts of larger-sized challenge particles.

Copyright 2014 American Association for Aerosol Research     

Identification of a new oxidation/ dissolution mechanism for boria-accelerated SiC oxidation

Boria effects on accelerated SiC oxidation kinetics were investigated by conducting thermogravimetric analysis on SiC substrates coated with sol-gel derived borosilicate glass isothermally exposed to dry O₂ and argon at 800°C and 1200°C for 100 hours. Boria concentrations in the glass coatings were 0, 14-38, and 92-94 mol%, balance silica. Accelerated weight gain was observed for SiC exposures in dry O₂ at 800°C when boria concentrations were ≥ 92 mol%, corroborated by oxide thickness ranging from 3.5 to 10 µm. The oxide thickness predicted for pure SiC exposed to these conditions in the absence of boria is 0.15 µm. Microstructural analysis of SiC surfaces after oxide removal revealed that boria etched the underlying SiC substrate. Oxidation exposures at 1200°C in dry O₂ suppressed boria effects on accelerating SiC oxidation kinetics due to rapid boria volatilization coupled with the formation of a protective thermally grown silica scale. Accelerated weight gain or oxide growth did not occur with argon exposures at either temperature. A new mechanism for boria-accelerated SiC surface-reaction kinetics is presented based on evidence for boria etching of SiC.     

Enhanced microbial oil production by activated sludge microorganisms via co‐fermentation of glucose and xylose

The co‐fermentation of glucose and xylose by activated sludge microorganisms for the production of microbial oils for use as biodiesel feedstock was investigated. Various carbon sources at initial concentration of 60 g/L and C:N ratio 70:1 were investigated: xylose, glucose, and 2:1 and 1:2 (by mass) glucose/xylose mixtures. Oil accumulation ranged between 12 to 22% CDW, the highest of which was obtained when xylose was the sole substrate used. Kinetic modeling of the fermentation data showed that specific growth and oil accumulation rates were similar in all substrate types and the lipid coefficient ranged from 0.02 to 0.06 g/g of sugar consumed. The fatty acid methyl ester yield and composition of the lipids showed their suitability for conversion to biodiesel. Based on the results, lignocellulose sugars could be used as fermentation substrates by activated sludge microorganisms for enhancing the oil content of sewage sludge for its use as a sustainable biofuel feedstock source. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4036–4044, 2013     

Hydrogen production using methane: Techno-economics of decarbonizing fuels and chemicals

In the near-to-medium future, hydrogen production will continue to rely on reforming of widely available and relatively low-cost fossil resources. A techno-economic framework is described that compares the current best practice steam methane reforming (SMR) with potential pathways for low-CO₂ hydrogen production; (i) Electrolysis coupled to sustainable renewable electricity sources; (ii) Reforming of hydrocarbons coupled with carbon capture and sequestration (CCS) and; (iii) Thermal dissociation of hydrocarbons into hydrogen and carbon (pyrolysis). For methane pyrolysis, a process based on a catalytic molten Ni-Bi alloy is described and used for comparative cost estimates. In the absence of a price on carbon, SMR has the lowest cost of hydrogen production. For low-CO₂ hydrogen production, methane pyrolysis is significantly more economical than electrochemical-based processes using commercial renewable power sources. At a carbon price exceeding $21 t^?1 CO₂ equivalent, pyrolysis may represent the most cost-effective means of producing low-CO₂ hydrogen and competes favorably to SMR with carbon capture and sequestration. The current cost disparity between renewable and fossil-based hydrogen production suggests that if hydrogen is to fulfil an expanding role in a low CO₂ future, then large-scale production of hydrogen from methane pyrolysis is the most cost-effective means during the transition period while infrastructure and end-use applications are deployed.     

Optimal experimental conditions for hydrogen production using low voltage electrooxidation of organic wastewater feedstock

The dependence of electrooxidation on experimental conditions of organic molecules was investigated to optimize the production of hydrogen from potential wastewater sources using low voltage sources (∼1 V dc). Electrooxidation on platinum, gold, and stainless steel anodes with hydrogen production on the cathode was investigated using several different organic reductants, including: methanol, ethanol, glycerol, isopropanol, propanal, glycerol, glucose, sucrose, citric acid, and propionic acid. The electrolyte pH was varied from 2 to 12 in a 1 M Na₂SO₄ supporting solution. At 1 V, glycerol, citric acid, ethanol and methanol were found to yield the highest currents at low pH values (pH 2 and 7) on platinum electrode, glucose on gold electrode at pH 12 in 1 M Na₂SO₄ solution produced the highest total current density at 1 V with measured Faradaic efficiency for 1 M glucose of 70%. The hydrogen energy production efficiency was 86%. Practical limitations of glucose oxidation at optimum experimental conditions are discussed.     

Curcumin induces apoptosis in immortalized NIH 3T3 and malignant cancer cell lines

Curcumin, which is a widely used dietary pigment and spice, has been demonstrated to be an effective inhibitor of tumor promotion in mouse skin carcinogenesis. We report that curcumin induces cell shrinkage, chromatin condensation, and DNA fragmentation, characteristics of apoptosis, in immortalized mouse embryo fibroblast NIH 3T3 erb B2 oncogene-transformed NIH 3T3, mouse sarcoma S180, human colon cancer cell HT-29, human kidney cancer cell 293, and human hepatocellular carcinoma Hep G2 cells, but not in primary culture of mouse embryonic fibroblast C3H 10T1/2, rat embryonic fibroblast, and human foreskin fibroblast cells in a concentration- and time-dependent manner. Many cellular and biochemical effects of curcumin in mouse fibroblast cells have been reported, such as inhibition of protein kinase C (PKC) activity induced by phorbol 12-myristate 13-acetate treatment, inhibition of tyrosine protein kinase activity, and inhibition of arachidonic acid (AA) metabolism. Treatment of NIH 3T3 cells with the PKC inhibitor staurosporine, the tyrosine kinase inhibitor herbimycin A, and the AA metabolism inhibitor quinacrine induces apoptotic cell death. These results suggest that, in some immortalized and transformed cells, blocking the cellular signal transduction might trigger the induction of apoptosis.     

Evaluation of Vitek GPS-SA card for testing of oxacillin against borderline-susceptible staphylococci that lack mec

Fifty-one Staphylococcus aureus strains lacking mec for which oxacillin MICs were 1 to 8 micrograms/ml were tested against oxacillin and the combination of oxacillin and clavulanic acid with the Vitek GPS-SA card, the reference broth microdilution method, and the oxacillin agar screen plate. Of the 51 strains, 44 (86%) did not grow on the oxacillin agar screen plate, broth microdilution MICs were 1 to 2 micrograms/ml, and GPS-SA card MICs were < or = 2 micrograms/ml, with the exception of 3 strains that failed to grow in the card on repeated attempts. Another seven strains did grow on the oxacillin agar screen plate. For four of the latter group of strains, oxacillin broth microdilution MICs were > 4 micrograms/ml and GPS-SA card MICs were > or = 4 micrograms/ml; for the other 3 strains, corresponding MICs were 4 and < or = 2 micrograms/ml, respectively. The GPS-SA card classified 86% of strains as oxacillin susceptible.