Pharmacokinetics of hyperimmune anti-human immunodeficiency virus immunoglobulin in persons with AIDS

Hyperimmune anti-human immunodeficiency virus immunoglobulin (HIVIG) is an intravenous immunoglobulin prepared from HIV-infected asymptomatic donors with a CD4 cell count greater than 400 cells/microl and a high titer of antibody to HIV-1 p24 protein. Twelve persons with AIDS received four doses of HMG (two at 50 mg/kg of body weight and then two at 200 mg/kg) every 28 days. Pharmacokinetics were evaluated by measurement of anti-p24 antibody. HIVIG was well tolerated, and all participants completed the study. Three subjects who were not receiving Pneumocystis carinii pneumonia (PCP) prophylaxis developed PCP. The mean value for HIVIG clearance was 3.02 ml/kg/day at 50 mg/kg and 3.65 ml/kg/day at 200 mg/kg (P = 0.027); the mean trough antibody titers (reciprocal units) were 1,442 and 4,428, respectively. This study indicates that high titers of anti-p24 antibody can be maintained with a monthly administration schedule of HIVIG and that short-term safety is acceptable. Comparisons to evaluate the therapeutic potential of HIVIG are justified.     

Intrauterine transfusions influence fetal leukocyte counts and subsets

Histamine is an important mediator in allergic reactions, gastric acid secretions, and neurotransmission in the central nervous system. Basophils and mast cells are the main sources of histamine, which is formed from L-histidine by histidine decarboxylase (HDC). However, the regulatory mechanism of HDC in these cells remains unclear. We examined the regulation of HDC activity and gene expression using a unique human mast cell line, HMC-1, after stimulation with phorbol 12-myristate 13-acetate (PMA) or ionomycin. HDC activity was increased from 52.1+/-0.4 (mean+/-standard deviation) to 154+/-6.9, or 105.6+/-6.2 pmol/min/mg protein (n = 3), 4 hours after stimulation with PMA (10 ng/mL) or ionomycin (10[-6] M). Although actinomycin D had no effect on this increase, cycloheximide completely inhibited the increase caused by these stimuli. The population of HMC-1 cells containing HDC protein was increased after stimulation with either PMA or ionomycin as evaluated by immunocytochemical analysis with anti-HDC antibody as a marker. HMC-1 constitutively expressed HDC mRNA, and its level was not increased with these stimuli. These results suggest that the increase of HDC activity in HMC-1 induced by PMA or ionomycin is regulated at the translational level.     

Experimental studies of mechanically-induced articular cartilage defects following implantation of allogeneic embryonal chondrocytes in a collagen-fibrin gel in chickens

Full thickness defects (diameter 1,7 mm; depth 2,5 mm) were created mechanically in articular cartilage and subchondral bone of the condyles of tibiotarsal joints of 9-month old chickens. This full-thickness defects were repaired with cultured allogenic embryonic chick epiphyseal chondrocytes from the tibiae and femura of 10-days-old chicken embryos. The cells were embedded in a collagen-fibrinogen-matrix. Controls were similarly operated, but received either no treatment or implants the delivery substance only. Healing of the defects was observed macroscopically, histologically, histochemically and histomorphometrically after 3, 12 and 24 weeks. This graft was successfully transplanted in mechanically induced defects in 80%. The resulting hyaline cartilage was structurally reorganized according to the host pattern and under the influence of environmental conditions. The articular zone preserved it's cartilaginous phenotype, whereas the subchondral regions were transformed into bone. 12 weeks after the operation the defects in the experimental group were completely filled. In all instances in this group, there was an initial extreme increase of mitotic rate and cell number. After 24 weeks normal and subnormal values were founded. The defects in the control groups healed with fibrocartilage. Our results showed, that only the defects in the experimental group were completely filled with reparative hyaline cartilage tissue. In the present study the mixture of cultured allogenic embryonic chondrocytes and a collagen-fibrinogen-matrix was used successfully as a transplant for repairing defects in articular cartilage of chickens. Thus allogenic transplantation of cultured embryonal chondrocytes appears to be one of the most promising methods for the restoration of articular cartilage.     

Dynamic programming implementation on array processor architectures

Dynamic Programming (DP) applies to many signal and image processing applications including boundary following, the Viterbi algorithm, dynamic time warping, etc. This paper presents an array processor implementation of generic dynamic programming. Our architecture is a SIMD array attached to a host computer. The processing element of the architecture is based on an ASIC design opting for maximum speed-up. By adopting a torus interconnection network, a dual buffer structure, and a multilevel pipeline, the performance of the DP chip is expected to reach the order of several GOPS. The paper discusses both the dedicated hardware design and the data flow control of the DP chip and the total array.This work was supported in part by the NATO, Scientific and Environmental Affairs Division, Collaborative Research Grant SA.5-2-05(CRG.960201)424/96/JARC-501.     

HIV arthritis

Whether reexposure of varicella-immune persons to varicella-zoster virus would protect against or predispose to development of zoster was analyzed. The rate of zoster in 511 leukemic recipients of varicella vaccine who had 1 or > 1 dose of varicella vaccine and in those who did or did not have a household exposure to varicella was determined. A Kaplan-Meier life-table analysis revealed that the incidence of zoster was lower in those given > 1 dose of vaccine (P < .05). A Cox proportional hazards analysis showed that both household exposure to varicella and receipt of > 1 dose of vaccine were highly protective (P < .01) against zoster. Thus, the risk of zoster is decreased by reexposure to varicella-zoster virus, either by vaccination or by close exposure to varicella.     

Hydriding and Dehydriding Characteristics of Mechanically Alloyed LaMg_(17) Ni Composite Material

Magnesiumandmagnesiumalloyshavebeenin vestigatedashydrogenstoragematerialsforseveralde cadesbecausefarmorehydrogenbyweightcanbestoredinthemthaninmostoftheothercurrentlyknownhydrogenstoragealloys .Moreover ,thehighnaturalabundanceofMg ,itslightmassandenviron mentalcompatibilitypotentiallymakemagnesiumoneofthemostprospectivecandidatesforfuturehydrogenstoragematerials .Unfortunately ,thepracticalappli cationofMganditsalloyshasbeenlimitedonlytocertainstoragedevicebecauseoftheirpoorhydriding dehydr…     

Formation and Characterization of 1.5-Monolayer Self-Assembled InAs/GaAs Quantum Dots Using Postgrowth Annealing

In this paper, we report that low-density InAs/GaAs quantum dots (QDs) can be formed by postgrowth annealing the samples with 1.5-monolayer (ML) InAs coverage, which is thinner than the critical layer thickness for the Stranski-Krastanov growth. The annealing procedure was performed immediately after the deposition of the InAs layer. The effects of annealing time and annealing temperature on the dot density, dot size, and optical characteristics of the QDs were investigated. The optimum annealing conditions to obtain low-density QDs are longer than 60 s and higher than 500degC . Meanwhile, no luminescence can be observed for the wetting-layer, which may suggest that the postgrowth annealing will make the wetting layer thinner and thus reduce the effects of wetting layer on carrier relaxation and recombination. On the other hand, we observe that a decrease of the PL intensity at the annealing conditions of 60 s and 515degC , which is possibly due to the increasing surface dislocations resulted from the In adatom desorption at higher annealing temperature.     

Rolling and Lifting Probabilities for Sediment Entrainment

This study addresses the rolling and lifting probabilities for sediment entrainment by incorporating the probabilistic features of the turbulent fluctuation and bed grain geometry. The lognormally distributed instantaneous velocity and uniformly distributed initial grain position, along with a relation between lift coefficient and particle Reynolds number, are used to extend the theoretical formulation of the entrainment probabilities in smooth-bed flows. The two threshold conditions identified herein enable us to precisely define the probabilities of entrainment in the rolling and lifting modes. The results obtained in this study coincide well with the published data. The lifting probability increases monotonously with the dimensionless shear stress θ, which is consistent with the earlier results yet displays improved agreement with the experimental data. The maximum value of rolling probability, with a magnitude of 0.25, occurs at θ ≈ 0.15. For θ<0.05 (or θ>0.6), the rolling (or lifting) probability makes up more than 90% of the total entrainment probability and thus can be used as an approximation to the total probability of entrainment. The proposed rolling and lifting probabilities are further linked to the two separate criteria for incipient motion to explore the critical entrainment probabilities. The results reveal that a consistent probability corresponding to the critical state of sediment entrainment cannot be found.     

Hermetic Packaging Using Eutectic SnPb Solder and Cr/Ni/Cu Metallurgy Layer

We have developed an easy, low-cost, and low-temperature optoelectronic hermetic packaging technology utilizing the eutectic SnPb solder and the Cr/Ni/Cu bonding pad. Bonding characteristics of the design were investigated in three different setups: silicon-silicon, silicon-glass, and glass-glass samples. Hermeticity was achieved at 200 degC without flux for all samples during the final bonding process. The bonding pads did not dewet during or after the reflow process. By utilizing the eutectic SnPb solder, the self-alignment process can be achieved. Because the bonding process was conducted through visual alignment, original misalignment was estimated to be more than 100 mum. The surface tension of melting solder during the reflow process allowed the samples to self-align and obtain a misalignment of less than 20 mum after solidification, which was 4% of the entire solder width. The bonding strength of the three setups ranged from 3 to 10 MPa. Among the three setups, glass-glass samples appear to have the strongest bonding strength. This low-temperature and cost-effective soldering process has demonstrated its feasibility and potential utilization in optoelectronic packaging