Effect of Cake Compression on the Performance of Centrifugal Dewatering

The effect of cake compression on the centrifugal dewatering is investigated under various rotating speeds and different kinds of cakes. A numerical method is proposed to estimate the capillary pressure and cake permeability under various cake saturations. The most dewatering in this study are operated at the funicular state of cake. The cake permeability decreases, while the capillary pressure increases rapidly, with the decrease of cake saturation during a centrifugal dewatering. The cake saturation can also be simulated once the relations among capillary pressure, cake permeability, and cake saturation are known. The deviations between simulated saturations and experimental data for compressible talc cakes are less than 2%. The centrifugal dewatering of compressible cake includes two mechanisms, the water squeeze due to cake compression and the centrifugal drainage due to pressure difference. The role of cake compression is dominant at the initial 500 s of the dewatering period, and these two factors are almost equal in magnitude as well as in importance when the cake approaches its equilibrium saturation. The porosity and compressibility of cake play the major roles in determining the equilibrium cake saturation. The equilibrium saturation of the compressible talc cake with a lower porosity is much higher than that of incompressible Al₂O₃ cake under a fixed rotating speed. An increase in rotating speed (centrifugal effect) results in a lower equilibrium cake saturation for either compressible or incompressible cakes; however, the increase in rotating speed is more efficient for an incompressible cake in the centrifugal dewatering.     

Experimental analysis of the dynamic properties of wet granular matter in a rotating drum

We performed experiments to measure the dynamic properties of wet granular matter in a rotating drum device. Four different amounts of liquid and rotation speeds were used in the experiments. The purpose was to quantify the effect of the cohesive force in the granular system. The results show that when only very small amounts of liquid were added, no liquid bridges formed. This is because the liquid was first trapped on the surface of the particles due to the particle roughness. When the volume fraction of the fluid became larger, liquid bridges formed on almost every particle. The results showed that the addition of liquid contents, and changing the rotation speed, both had a significant effect on the dynamic properties of granular matter. This was due to the hysteretic formation and rupturing of liquid bridges and the introduction of inertial force to the device. After the liquid bridges formed between all particles the average energy dissipation due to the hysteretic formation and rupturing of the liquid bridges increased with an increase in the liquid content.     

Fabrication of submicron scale vertically aligned diamond rods by mask-free oxygen plasma etching

A mask-free plasma etching process is described to fabricate 6 μm long submicron diamond rods (SDRs) in long conical shape. Polished polycrystalline diamond is etched in oxygen plasma ignited at a pressure of 10 mTorr by radio-frequency power of 100 W at 13.56 MHz. Each SDR is a bi-crystal, consisting of two diamond crystallites of micron size. The SDR is coated with a Fe₂O₃ layer, as characterized by Auger electron spectroscopy, X-ray photoemission microscopy, and transmission electron microscopy. We propose that a “self-forming” mask of Fe₂O₃ is generated during the etching process in which iron atoms sputtered from the substrate holder are deposited and oxidized on the diamond surface forming “micromask” that protects the underlying diamond and promotes the formation of SDRs.     

Enhanced Differentiation of Three-Gene-Reprogrammed Induced Pluripotent Stem Cells into Adipocytes via Adenoviral-Mediated PGC-1α Overexpression

Induced pluripotent stem cells formed by the introduction of only three factors, Oct4/Sox2/Klf4 (3-gene iPSCs), may provide a safer option for stem cell-based therapy than iPSCs conventionally introduced with four-gene iPSCs. Peroxisome proliferator-activated receptor gamma coactivator-1α (PGC-1α) plays an important role during brown fat development. However, the potential roles of PGC-1α in regulating mitochondrial biogenesis and the differentiation of iPSCs are still unclear. Here, we investigated the effects of adenovirus-mediated PGC-1α overexpression in 3-gene iPSCs. PGC-1α overexpression resulted in increased mitochondrial mass, reactive oxygen species production, and oxygen consumption. Microarray-based bioinformatics showed that the gene expression pattern of PGC-1α-overexpressing 3-gene iPSCs resembled the expression pattern observed in adipocytes. Furthermore, PGC-1α overexpression enhanced adipogenic differentiation and the expression of several brown fat markers, including uncoupling protein-1, cytochrome C, and nuclear respiratory factor-1, whereas it inhibited the expression of the white fat marker uncoupling protein-2. Furthermore, PGC-1α overexpression significantly suppressed osteogenic differentiation. These data demonstrate that PGC-1α directs the differentiation of 3-gene iPSCs into adipocyte-like cells with features of brown fat cells. This may provide a therapeutic strategy for the treatment of mitochondrial disorders and obesity.     

铬钼钢压力容器制造工艺分析

本文通过分析15CrMoR钢的制造工艺特点,提出了铬钼钢压力容器制造工艺的选择方法及常见问题的处理。     

Changes in the crystallinity and mechanical properties of poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactic acid)/poly(butylene succinate-<Emphasis Type="Italic">co</Emphasis>-<Emphasis Type="SmallCaps">l</Emphasis>-lactate) blend with annealing process

Biodegradable polymer blends of poly(l-lactic acid) (PLLA) and poly(butylene succinate-co-l-lactate) (PBSL) at various blending ratios are prepared. The blending of PLLA with PBSL results in an increase in the ductility and thermal stability of the blend. However, flexural strength and modulus, as well as loss modulus, decrease with an increase in PBSL content. Annealing is employed to increase blend crystallinity and subsequently improve the mechanical properties of the PLLA/PBSL blend. The influences of annealing time on the crystal modification, thermal properties, and mechanical properties of the PLLA/PBSL blend are investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), and three-point bending test, respectively. Crystalline peaks are found in the XRD patterns of all annealed samples. DSC analysis reveals that the degree of crystallinity is enhanced with an increase in annealing time. The flexural modulus also increases with annealing time due to the change in crystalline phases. However, longer periods of annealing, especially over 20 h, result in thermal degradation and subsequently reduce the modulus value of the PLLA/PBSL blend.     

The compatibility of transition metal oxide/carbon composite anode and ionic liquid electrolyte for the lithium-ion battery

Three types of transition metal oxide/carbon composites including Fe₂O₃/C, NiO/C and CuO/Cu₂O/C synthesized via spray pyrolysis were used as anode for lithium ion battery application in conjunction with two types of ionic liquid: 1 M LiN(SO₂CF₃)₂ (LiTFSI) in 1-ethyl-3-methyl-imidazolium bis(fluorosulfonlyl)imide (EMI-FSI) or 1-methyl-1-propylpyrrolidinium bis(fluorosulfonyl)imide (Py13-FSI). From the electrochemical measurements, the composite electrodes using Py13-FSI as electrolyte show much better electrochemical performance than those using EMI-FSI as electrolyte in terms of reversibility. The Fe₂O₃/C composite shows the highest specific capacity and the best capacity retention (425 mAh g⁻¹) under a current density of 50 mA g⁻¹ for up to 50 cycles, as compared with the NiO/C and CuO/Cu₂O/C composites. The present research demonstrates that Py13-FSI could be used as an electrolyte for transition metal oxides in lithium-ion batteries.     

Phase Transformation during Plasma Spraying of Hydroxyapatite–10-wt%-Zirconia Composite Coating

This study aims to explore phase transformation in plasma-sprayed hydroxyapatite (HA) + 10 wt% ZrO₂–8-mol%-Y₂O₃composite coating, using separately prepared HA and ZrO₂–8-mol%-Y₂O₃coatings as a control. Changes in the phase and chemistry of the coatings are characterized by X-ray diffractometry, with lattice-constant measurement (Cohen's method), and by transmission electron microscopy. Experimental results show evidence of diffusion, in the liquid state, of calcium ions from the HA matrix into the ZrO₂. This behavior causes the formation of the following structural features in the composite coating: (i) a CaO-doped ZrO₂solid solution (ZrO₂–7.7 mol% Y₂O₃–4.4 mol% CaO); (ii) a mixture of ZrO₂and CaZrO₃having a crystal-orientation relationship; (iii) an amorphous phase containing elements of calcium, phosphorus, zirconium, and yttrium; and (iv) a remaining CaO-poor HA matrix (Ca_{10− x} (HPO₄) _x (PO₄)_{6− x} (OH)_{2− x} ; x = 0.06). Rationales for the greatly decreased impurity phases of CaO and Ca₄P₂O₉found in the composite coating are discussed.     

Superplastic Deformation in Fine-Grained YBa2Cu3O7−x

The superplastic behavior of YBa₂Cu₃O_{7− x} ceramic superconductors was studied. Large compressive deformation over 100% strain was measured in the temperature range of 775°–875°C, with a strain rate of 1 × 10⁻⁵ to 1 × 10⁻³/s, and a grain size of 0.5–1.4 μm. The nature of the deformation was investigated in terms of three deformation parameters: the stress exponent ( n ), the grain size exponent ( p ), and the activation energy ( Q ). The measured values of these parameters were n = 2 ± 0.3, p = 2.7 ± 0.7, and Q = 745 ± 100 kJ/mol. With the aid of the deformation map, the deformation mechanism was identified as grain boundary sliding accommodated by grain boundary diffusion. The conclusion is consistent with the microstructural observations made by SEM and TEM: the invariance of equiaxed grain shape, the absence of significant dislocation activity, no grain boundary second phases, and no significant texture development.