A Surface Tailoring Method of Ultrathin Polymer Gate Dielectrics for Organic Transistors: Improved Device Performance and the Thermal Stability Thereof

Tailoring the surface of the dielectric layer is of critical importance to form a good interface with the following channel layer for organic thin film transistors (OTFTs). Here, a simple surface treatment method is applied onto an ultrathin (<15 nm) organosilicon‐based dielectric layer via the initiated chemical vapor deposition (iCVD) to make it compatible with organic semiconductors without degrading its insulating property. A molecular‐thin oxide capping layer is formed on a 15 nm thick poly(1,3,5‐trimetyl‐1,3,5‐trivinyl cyclotrisiloxane) (pV3D3) by a brief oxygen plasma treatment. The capping layer greatly enhances the thermal stability of the dielectrics, without degrading the original mechanical flexibility and insulating performance of the dielectrics. Moreover, the surface silanol functionalities formed by the plasma treatment can also be utilized for the surface modification with silane compounds. The surface‐modified dielectrics are applied to fabricate low‐voltage operating (<5 V) pentacene‐based OTFTs. The highest field‐effect mobility of the device with the surface‐treated 15 nm thick pV3D3 is 0.59 cm² V^?1 s^?1, which is improved up to two times compared to the TFT with the pristine pV3D3. It is believed that the simple surface treatment method can widely extend the applicability of the highly robust, ultrathin, and flexible pV3D3 gate dielectrics to design the surface of the dielectrics to match well various kinds of organic semiconductors.     

Effects of K2O Evaporation on the Structural Properties of KSbO3 Compounds

A specimen having a stoichiometric composition of KSbO₃·(KSb) calcined at 800°C has an R rhombohedral structure (RS), and changes to a Pn cubic structure (CS) when calcined at 1100°C. Finally, a <111>‐oriented rhombohedral phase is formed in the specimen calcined at 1230°C. K/Sb ratio decreases from 1.0 in RS, 0.93 in CS, and finally to 0.85 in <111>‐oriented rhombohedral phases. On the other hand, a specimen having a K‐excess composition of K_1.1SbO₃ calcined at 800°C shows a RS that is maintained in the K‐excess specimen calcined at 1230°C. The composition of these specimens is very close to KSb. Therefore, the RS with a space group of R is a stable form of KSbO₃. The formation of Pn cubic and <111>‐oriented R phases can be explained by the evaporation of K₂O during the calcination process at temperatures above 1100°C.     

Terahertz scanning techniques for paint thickness on CFRP composite solid laminates

Terahertz ray (T-ray) scanning applications are promising tools. The use of T-ray for nondestructive evaluation was investigated on composite materials. In this characterization procedure, electromagnetic properties, such as the refractive index, were analyzed. The estimates of properties are in good agreement with known data. We successfully demonstrated the characteristics of T-ray propagating through Carbon fiber-reinforced plastic (CFRP) composites to acquire the refractive index by using the characterized material properties. A T-ray technique was developed for measuring paint thickness on CFRP laminates. Good results were obtained from tests performed on standard paint samples with thickness starting from approximately 100 μm. The method was based on reflection mode measurement with time of flight. Another method developed for measuring paint thickness using resonance frequencies was utilized to determine paint thickness on composite laminates. The paint thickness deduced from resonance frequencies agrees well with the result obtained directly from time-domain echoes.     

Comparison of thin epitaxial film silicon photovoltaics fabricated on monocrystalline and polycrystalline seed layers on glass

We fabricate thin epitaxial crystal silicon solar cells on display glass and fused silica substrates overcoated with a silicon seed layer. To confirm the quality of hot‐wire chemical vapor deposition epitaxy, we grow a 2‐µm‐thick absorber on a (100) monocrystalline Si layer transfer seed on display glass and achieve 6.5% efficiency with an open circuit voltage (V_OC) of 586 mV without light‐trapping features. This device enables the evaluation of seed layers on display glass. Using polycrystalline seeds formed from amorphous silicon by laser‐induced mixed phase solidification (MPS) and electron beam crystallization, we demonstrate 2.9%, 476 mV (MPS) and 4.1%, 551 mV (electron beam crystallization) solar cells. Grain boundaries likely limit the solar cell grown on the MPS seed layer, and we establish an upper bound for the grain boundary recombination velocity (S_GB) of 1.6x10⁴ cm/s. Copyright © 2014 John Wiley & Sons, Ltd.     

Proteins in longissimus muscle of Korean native cattle and their relationship to meat quality

Proteomic profiling by two-dimensional gel electrophoresis and mass spectrometry of longissimus dorsi muscle tissue from Korean native cattle identified seven proteins that are differentially expressed in animals producing low and high quality grade beef. The expression level of alpha actin is increased in high quality grade beef and the expression levels of T-complex protein 1 (TCP-1), heat shock protein beta-1 (HSP27), and inositol 1,4,5-triphosphate receptor type1 (IP3R1), a new protein to be associated with meat quality, are increased in low quality grade beef. In particular, the quantitation of HSP27 and IP3R1 by both silver staining and immunoblotting correlated well with intramuscular fat content, meat tenderness, and free calcium levels. The data suggest that HSP27 and IP3R1 are potential meat quality biomarkers and their identification provides new insight into the molecular mechanisms and pathways associated with overall beef quality.     

Constituents isolated from Glehnia littoralis suppress proliferations of human cancer cells and MMP expression in HT1080 cells

Crude extract and solvent-partitioned fraction of Glehnia littoralis were found to possess different anti-proliferative effects against AGS, HT1080 and U937 human cancer cells. The crude extracts and solvent fractions dose-dependently inhibited cell proliferation. Especially, n-hexane and 85% aqueous MeOH fractions exhibited comparatively higher anti-proliferative effects and reduced expressions of Bcl-2, COX-2 and iNOS genes. Systematic separation of all solvent fractions by chromatographic methods led to the isolation of three glucopyranosides, four furanocoumarins and two polyacetylenic alcohols. All the nine compounds were evaluated for their inhibitory effects against both proliferation of human cancer cells and expressions of MMP-2 and -9 in HT1080 cells. Two polyacetylenic alcohols exerted the highest inhibitory activity against both human cancer cell lines, and MMP-2 and -9. These results suggest that G. littoralis may possibly be used as a valuable chemopreventive agent or food supplement for reducing cancer risk.     

Thermal fluorination effects on carbon nanotubes for preparation of a high-performance gas sensor

A high-performance NO gas sensor was prepared by inducing thermal fluorination of carbon nanotube semiconductors. Thermal fluorination of multi-walled carbon nanotubes (MWCNTs) was carried out at various temperatures (100 ∼ 1000 °C) to investigate the effects of the reaction temperature. The mechanism of high-performance NO gas sensor electrode was shown to depend on the fluorination temperature in a way that can be divided into three regions, separated at 400 and 1000 °C. In the first temperature region, the induction of fluorine functional groups onto MWCNTs showed the opposite trend in electrical resistance change comparing with traditional p-type MWCNTs. In the second temperature region, the induced fluorine functional groups were attenuated by generated fluorinated carbon gases resulting in the decomposition of MWCNTs and the recovery of traditional p-type gas sensor behavior. In the highest temperature region above 1000 °C, reoriented carbon structure was observed, showing bent nanotubes produced from destruction by fluorination and subsequent reorientation due to the high temperature. The gas sensing responsiveness was significantly improved by the thermal fluorination, which causes electrophilic attraction, creates adsorption sites for target NO gases and improve hydrophobicity for gas sensing stability in humid condition. In conclusion, a high-performance gas sensor was obtained by thermal-fluorination of MWCNTs.     

Near‐infrared‐active and pH‐responsive fluorescent polymer‐integrated hybrid graphene oxide nanoparticles for the detection and treatment of cancer

Hybrid nanoparticles for theragnosis have great potentiality to bring desire functionalities in one integrated system. The development of bioimaging guided photothermal therapy (PTT) is pivotal in optimizing cytotoxic cancer therapy. We report near‐infrared (NIR)‐active and pH‐responsive fluorescent, catechol‐conjugated, reduced graphene oxide (rGO)‐anchored hybrid nanoparticles that can sharply increase the photothermal heat in response to NIR exposure and exhibit pH‐dependent fluorescence emission for the detection of tumor areas without causing cell toxicity. The optoelectronic absorption property of poly(3,4‐ethylenedioxythiophene) [PEDOT]:dopamine‐conjugated poly(4‐styrenesulfonate‐co‐maleic acid) [D‐PSM] and 3′,4′‐dihydroxyacetophenone/boron‐dipyrromethene [CCDP/BODIPY]‐quaternized polyethylene glycol grafted poly(dimethylaminoethyl methacrylate) (C/B‐PgP) present in this hybrid nanoparticles resulted in efficient photothermal conversion with pH‐tunable fluorescence that exerted sufficient photothermal cytotoxicity to cancer cells. The in vitro cellular uptake was measured by confocal laser scanning microscopy, allowing the therapeutic efficiency and bioimaging effects to be explored. We expect that the broad optical absorption property of PEDOT:D‐PSM with BODIPY‐conjugated polymers on rGO sheets would get tremendous attraction in this enormous rising PTT with cancer detectable biomarker. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43791.     

Numerical analysis of pulsating heat pipe based on separated flow model

The examination on the operating mechanism of a pulsating heat pipe (PHP) using visualization revealed that the working fluid in the PHP oscillated to the axial direction by the contraction and expansion of vapor plugs. This contraction and expansion is due to the formation and extinction of bubbles in the evaporating and condensing section, respectively. In this paper, a theoretical model of PHP was presented. The theoretical model was based on the separated flow model with two liquid slugs and three vapor plugs. The results show that the diameter, surface tension and charge ratio of working fluid have significant effects on the performance of the PHP. The following conclusions were obtained. The periodic oscillations of liquid slugs and vapor plugs were obtained under specified parameters. When the hydraulic diameter of the PHP was increased to d=3mm, the frequency of oscillation decreased. By increasing the charging ratio from 40 to 60 by volume ratio, the pressure difference between the evaporating section and condensing section increased, the amplitude of oscillation reduced, and the oscillation frequency decreased. The working fluid with higher surface tension resulted in an increase in the amplitude and frequency of oscillation. Also the average temperature of vapor plugs decreased.     

Experimental research on thermal comfort in the university classroom of regular semesters in Korea

This research has investigated physical variables affecting indoor thermal comfort and subjective responses of thermal comfort of students in a university in Korea in which the weather is oceanic temperate climate, and has been performed to contribute to the research fields of Sustainable Thermal Standard and Adaptive Thermal Comfort (ATC). This research is based on the ISO 7730-2005 standard and the ATC theories and 4 main variables of PMV such as dry bulb temperature (Ta), relative humidity (RH), black bulb temperature (Tg), and air velocity (Va) are measured once a week during two regular semesters. A clothing insulation, a thermal sensation vote (TSV), an acceptability of thermal environment, and a preference for cooling and heating are investigated at the same time using a questionnaire. This study was carried out for 26 weeks during the spring season, from March to June 2009, and the autumn season, from September to December 2009. The main achievements of this study are as follows. Monthly Mean Outdoor Temperature (MMOT) and Operative Temperature (OT) in the classroom during research periods are 7.4∼23.3°C and 17.5∼29.0°C, respectively. The acceptability ratio of thermal environment shows over 80% when the range of OT in the classroom is 17∼25°C, and the range can be applicable to operative index of heating and cooling of classroom. The mean TSV of respondents is almost “neutral (0)” when the PMV in the classroom moves to “neutral (0)” and “slightly cool (−1)”, and the TSV is almost “+1.5” when the PMV moves to “slightly warm (+1)”. The acceptability ratio of thermal environment is slightly different from ASHRAE Standard 55-2004. So it is necessary to more investigate standard range of acceptability of thermal environment in oceanic temperate climate region using much more databases.