InAs/GaAsSb带间级联中波红外焦平面研究

针对高工作温度红外探测器的迫切需求,设计并利用分子束外延技术制备了高晶格质量的2级带间级联中波红外探测材料,带间级联单元器件在最高323 K下可以测试到清晰的响应光谱,140 K下暗电流密度达到4×10~(-5)A/cm~(-2).并在此基础上利用干法刻蚀技术实现了320×256规模的台面型带间级联红外焦平面原型器件.焦平面测试结果表明其在80-120K范围内量子效率达到30%,127 K下噪声等效温差为55.1 mK,盲元率为2.3%.采用该焦平面器件在127 K下获得了较为清晰的演示性室温目标红外热成像.     

Highly Efficient Photoelectrochemical Water Splitting: Surface Modification of Cobalt‐Phosphate‐Loaded Co3O4/Fe2O3 p–n Heterojunction Nanorod Arrays

Hematite (α‐Fe₂O₃) as a photoanode material for photoelectrochemical (PEC) water splitting suffers from the two problems of poor charge separation and slow water oxidation kinetics. The construction of p–n junction nanostructures by coupling of highly stable Co₃O₄ in aqueous alkaline environment to Fe₂O₃ nanorod arrays with delicate energy band positions may be a challenging strategy for efficient PEC water oxidation. It is demonstrated that the designed p‐Co₃O₄/n‐Fe₂O₃ junction exhibits superior photocurrent density, fast water oxidation kinetics, and remarkable charge injection and bulk separation efficiency (η_inj and η_sep), attributing to the high catalytic behavior of Co₃O₄ for the oxygen evolution reaction as well as the induced interfacial electric field that facilitates separation and transportation of charge carriers. In addition, a cocatalyst of cobalt phosphate (Co‐Pi) is introduced, which brings the PEC performance to a high level. The resultant Co‐Pi/Co₃O₄/Ti:Fe₂O₃ photoanode shows a photocurrent density of 2.7 mA cm^?2 at 1.23 V_RHE (V vs reversible hydrogen electrode), 125% higher than that of the Ti:Fe₂O₃ photoanode. The optimized η_inj and η_sep of 91.6 and 23.0% at 1.23 V_RHE are achieved on Co‐Pi/Co₃O₄/Ti:Fe₂O₃, respectively, corresponding to the 70 and 43% improvements compared with those of Ti:Fe₂O₃. Furthermore, Co‐Pi/Co₃O₄/Ti:Fe₂O₃ shows a low onset potential of 0.64 V_RHE and long‐time PEC stability.     

Ionic Modulation of Interfacial Magnetism in Light Metal/Ferromagnetic Insulator Layered Nanostructures

Ferromagnetic insulator thin film nanostructures are becoming the key component of the state‐of‐the‐art spintronic devices, for instance, yttrium iron garnet (YIG) with low damping, high Curie temperature, and high resistivity is explored into many spin–orbit interactions related spintronic devices. Voltage modulation of YIG, with great practical/theoretical significance, thus can be widely applied in various YIG‐based spintronics effects. Nevertheless, to manipulate ferromagnetism of YIG through electric field (E‐field), instead of current, in an energy efficient manner is essentially challenging. Here, a YIG/Cu/Pt layered nanostructure with a weak spin–orbit coupling interaction is fabricated, and then the interfacial magnetism of the Cu and YIG is modified via ionic liquid gating method significantly. A record‐high E‐field‐induced ferromagnetic resonance field shift of 1400 Oe is achieved in YIG (17 nm)/Cu (5 nm)/Pt (3 nm)/ionic liquid/Au capacitor layered nanostructures with a small voltage bias of 4.5 V. The giant magnetoelectric tunability comes from voltage‐induced extra ferromagnetic ordering in Cu layer, confirmed by the first‐principle calculation. This E‐field modulation of interfacial magnetism between light metal and magnetic isolator may open a door toward compact, high‐performance, and energy‐efficient spintronic devices.     

Injectable Self‐Healing Antibacterial Bioactive Polypeptide‐Based Hybrid Nanosystems for Efficiently Treating Multidrug Resistant Infection,Skin‐Tumor Therapy,and Enhancing Wound Healing

The surgical procedure in skin‐tumor therapy usually results in cutaneous defects, and multidrug‐resistant bacterial infection could cause chronic wounds. Here, for the first time, an injectable self‐healing antibacterial bioactive polypeptide‐based hybrid nanosystem is developed for treating multidrug resistant infection, skin‐tumor therapy, and wound healing. The multifunctional hydrogel is successfully prepared through incorporating monodispersed polydopamine functionalized bioactive glass nanoparticles (BGN@PDA) into an antibacterial F127‐ε‐Poly‐L‐lysine hydrogel. The nanocomposites hydrogel displays excellent self‐healing and injectable ability, as well as robust antibacterial activity, especially against multidrug‐resistant bacteria in vitro and in vivo. The nanocomposites hydrogel also demonstrates outstanding photothermal performance with (near‐infrared laser irradiation) NIR irradiation, which could effectively kill the tumor cell (>90%) and inhibit tumor growth (inhibition rate up to 94%) in a subcutaneous skin‐tumor model. In addition, the nanocomposites hydrogel effectively accelerates wound healing in vivo. These results suggest that the BGN‐based nanocomposite hydrogel is a promising candidate for skin‐tumor therapy, wound healing, and anti‐infection. This work may offer a facile strategy to prepare multifunctional bioactive hydrogels for simultaneous tumor therapy, tissue regeneration, and anti‐infection.     

Highly Stretchable and Wearable Thermotherapy Pad with Micropatterned Thermochromic Display Based on Ag Nanowire–Single‐Walled Carbon Nanotube Composite

Due to the increasing interest in wearable devices, flexible and stretchable film heaters have been widely studied, as alternatives to heaters with conventional rigid shapes. Herein, a highly stretchable film heater (SFH) based on the silver nanowire (Ag NW)–single‐walled carbon nanotube composite with a thermochromic display on a polydimethylsiloxane (PDMS) substrate is successfully fabricated. The SFH shows excellent electrical conductivity, high mechanical stretchability, and outstanding reliability, with no significant degradation after 10 000 stretching cycles under tensile strain. The SFH can be heated to the target temperature (≈60 °C) within 30 s at a low applied voltage. In addition, a thermochromic display is fabricated to help prevent the risk of low‐temperature burns. Red (R), green (G), and blue (B) thermochromic microparticles (TMPs) are synthesized using drop‐based microfluidic technology. The TMPs show RGB colors at room temperature but change to a white color above a certain temperature. The TMPs are arrayed into a PDMS stencil on the basis of their particle sizes using the rubbing technique. The micropatterned thermochromic display, which functions as a visual alarm, combined with the SFH can pave the way for the development of thermotherapy pads for next‐generation wearable devices in the medical field.     

Self‐Assembly of Nanoparticle‐Spiked Pillar Arrays for Plasmonic Biosensing

Plasmonic biosensors have demonstrated superior performance in detecting various biomolecules with high sensitivity through simple assays. Scaled‐up, reproducible chip production with a high density of hotspots in a large area has been technically challenging, limiting the commercialization and clinical translation of these biosensors. A new fabrication method for 3D plasmonic nanostructures with a high density, large volume of hotspots and therefore inherently improved detection capabilities is developed. Specifically, Au nanoparticle‐spiked Au nanopillar arrays are prepared by utilizing enhanced surface diffusion of adsorbed Au atoms on a slippery Au nanopillar arrays through a simple vacuum process. This process enables the direct formation of a high density of spherical Au nanoparticles on the 1 nm‐thick dielectric coated Au nanopillar arrays without high‐temperature annealing, which results in multiple plasmonic coupling, and thereby large effective volume of hotspots in 3D spaces. The plasmonic nanostructures show signal enhancements over 8.3 × 10⁸‐fold for surface‐enhanced Raman spectroscopy and over 2.7 × 10²‐fold for plasmon‐enhanced fluorescence. The 3D plasmonic chip is used to detect avian influenza‐associated antibodies at 100 times higher sensitivity compared with unstructured Au substrates for plasmon‐enhanced fluorescence detection. Such a simple and scalable fabrication of highly sensitive 3D plasmonic nanostructures provides new opportunities to broaden plasmon‐enhanced sensing applications.     

Related-key impossible boomerang cryptanalysis on TWINE

In order to evaluate the security of the lightweight block cipher TWINE,the method of related-key impossible boomerang cryptanalysis was applied and a related-key impossible boomerang distinguisher consisting of 16-round and 17-round paths was constructed.Based on this new distinguisher,an attack on 23-round TWINE was mounted successfully by concatenating 4-round to the beginning and 2-round for the 17-round path and 3-round for the 16-round path to the end respectively.The attack on 23-round TWINE required data complexity of only 2 ^62.05plaintexts and computational complexity of about 2 ^70.4923-round encryptions.Compared with published cryptanalysis results,the proposed attack has obvious advantages.     

Measurement of video initial buffer size for mobile network

To resolve the difficulty in accurately measure the length of video initial buffering queue,two video platforms,non-encrypted Youku and encrypted YouTube,were selected to research,and the video initial buffer queue length measurement method was proposed.By identifying and analyzing the characteristics of video traffic,correlating the traffic behavior with the playing state,constructing video fingerprint database,accurate measurement of queue length was realized.The experimental results show that the measurement results of the two types could be accurate to the frame,fully meeting the need to accurately evaluate the quality of the video experience.     

靶面激光光斑尺寸原位测量的研究

提供了一种简便易行的靶面激光光斑尺寸原位测量的方法。从高斯光束的横向光强分布特性出发,建立了激光烧蚀斑半径与辐照激光能量、光斑尺寸、烧蚀阈值间的关系式,模拟分析发现辐照激光光斑尺寸对烧蚀斑半径随辐照能量变化曲线有较大影响。对于脉宽为2 ms,波长为1064 nm的激光,实验测量了不同能量激光辐照下相纸烧蚀斑半径,并用推导出的关系式拟合测量数据,获得了靶面处光斑尺寸和样品烧蚀阈值。同时,也测量了不同位置处的光斑尺寸和样品烧蚀阈值,对高斯光束束腰位置和样品烧蚀阈值的光斑尺寸效应进行了验证。研究结果表明该技术结果可靠,简单高效。该技术可以为高能激光与固体物质相互作用的基础研究和激光加工等应用领域中实现简单方便地测量靶面光斑尺寸提供帮助。     

基于FPGA的串行接口芯片的设计与应用

介绍了一种用FPGA代替传统的串行接口实验芯片的设计方法。根据可编程串行接口芯片8251A标准及功能,划分其功能模块,使用ISE和Modelsim软件,利用VHDL语言完成了8251A的逻辑设计、功能仿真、综合实现和布局布线,使用ISE的iMPACT工具将生成的配置文件加载到实际的硬件环境中测试,验证了该方案的可行性,成功完成了串行通讯接收发送实验,提出了利用该方法在实验课程改革中的应用。