Friction and wear behavior of graphite fiber-reinforced composites

Friction and wear behavior of continuous graphite fiber composites was studied for different fiber orientations against the sliding direction. The effect of fiber orientation on friction and wear of the composite and on deformation of the counterface was investigated experimentally. A pin on disk type testing machine was built and employed to generate friction and wear data. A graphite fiber composite plate was produced by the bleeder ply molding in an autoclave and machined into rectangular pin specimens with specific fiber orientations, i.e., normal, transverse, and longitudinal directions. Three different wear conditions were employed for two different periods of time, 24 and 48 hours. The wear track of the worn specimens and the metal counterface was examined and a scanning electron microscope (SEM) to observe the damaged fibers on the sliding surface of the specimen and wear film generation on the counterface. A wear mechanism of the continuous graphite fiber composite during sliding wear is proposed based on the experimental results.     

Effect of the concentration of diphenyloctyl phosphate as a flame-retarding additive on the electrochemical performance of lithium-ion batteries

We selected diphenyloctyl phosphate (DPOF) as a flame-retardant and plasticizer, and studied the influence of different amounts of the DPOF additive on the electrochemical performance of lithium-ion batteries. The electrochemical cell performances of the additive-containing electrolytes in combination with a cell comprising an LiCoO₂ cathode and mesocarbon microbeads (MCMB) anode were tested in coin cells. The cyclic voltammetry (CV) results showed that the oxidation potential of the electrolyte containing DPOF in the concentration range from 10 to 30 wt.% is about 4.75-5.5 V versus Li/Li⁺. In the present work, a DPOF content of 10 wt.% in the 1.15 M LiPF₆/EC:EMC (4:6 by vol.%) electrolyte turned out to be the optimum condition for the improvement of the electrochemical cell performance, due to the decrease of the irreversible capacity during the first cycle and decrease of the charge-transfer resistance after 40 cycles.     

Rupture recurrence after surgical repair of postinfarction ventricular septal rupture. Influence of early thrombolysis

OBJECTIVES: The aim of this study was to identify factors causing rupture recurrence after surgical repair of postinfarction ventricular septal rupture and to evaluate the indication for reoperation. PATIENTS: Recurrence of rupture was analysed in 25 out of a series of 109 patients who underwent surgical repair for postinfarction ventricular septal rupture between 1980 and 1992 in our institution. RESULTS: The mean interval between initial operation and recurrence was 3.6 days with a median of 2 days. Multivariate logistic regression analysis identified early thrombolysis after infarction (P = 0.0085) as a risk factor for recurrence of the rupture. Rupture recurrence occurred more in the anterior then in the posterior infarction site, although non-significant. Reoperation was indicated in 15 patients, in 13 for postrecurrent cardiac failure. The main determinant of cardiac failure was a large postrecurrent shunt (P = 0.05). The mean interval between initial operation and reoperation was 136 days with a median of 101 days. In 6 patients a combined apical ventricular septal rupture recurrence and anterior ventricular aneurysm was found, in 9 patients the recurrent rupture was proximally located, without concomitant aneurysm formation. Of 15 patients who were reoperated, one died in hospital and three after the in-hospital period. Of 10 patients treated conservatively, one died in hospital and two after the in-hospital period. One residual ventricular septal rupture closed spontaneously. CONCLUSIONS: Rupture recurrence is mainly determined by early thrombolysis. Postrecurrent cardiac failure, as the main indication for reoperation, is dependent on postrecurrent shunt size.     

Results of irradiation treatment in patients with non-resectable oesophageal cancer

Forty-eight patients with non-resectable cancer of the oesophagus and oesophagogastric junction (Group A: Stage I/II, 32; Group B: Stage III/IV, 16) underwent intraluminal Iridium-192 high dose-rate afterloading therapy (5-7 Gy/session, total dose: 5-21 Gy, mean: 12.4 Gy) and external beam irradiation (Karnofsky > or = 80% 50-60 Gy/2 Gy per day; Karnofsky 60-79%: 30 Gy/3 Gy per day). Durable satisfactory palliation (intake of at least semi-solid food) was demonstrated in 96% of patients. The mean survival for group A was 19.1 months and that for group B, 6.9 months, with a 12-month survival rate of 66% (group A) and 0% (group B) (P < 0.001). Local tumour response and complication rate were significantly dose-related with a predicted response rate of 70.5%, and a complication rate of 50% at ERD 129.3 Gy.     

Mutations in the EXT1 and EXT2 genes in hereditary multiple exostoses

In an in-vitro preparation of gastric mucosae of Rana pipiens, the effect of adding melittin to a concentration of 5x10-6 M in the secretory solution on the transepithelial potential difference (PD), resistance (R) and short-circuit current (Isc) was studied. In 20 min, melittin decreased the PD by 9.3 mV and R by 148 ohm cm2. These changes can be explained by a decrease in the resistance, RP, of the paracellular pathway. To determine whether specific-ion pathways were responsible for the decrease in R, the effect of melittin on the partial conductances of Cl-, K+ and Na+ was also studied using the ion substitution method. Melittin decreased the PD response to changes in nutrient Na+, K+ and Cl- and the PD response to changes in secretory Cl-, but did not affect PD responses to changes in secretory Na+ or K+. Therefore, melittin decreased the nutrient membrane partial conductances of Cl-, K+ and Na+ and secretory membrane partial conductance of Cl-, without affecting the secretory partial conductances of Na+ or K+. Initially, melittin increased Isc in regular and Cl--free but not in Na+-free solutions. There was a delayed decrease in Isc. The results indicate that melittin decreases RP, increases the Na+ conductance of the secretory membrane and inhibits, eventually, the Na+/K+-ATPase pump.     

Familial transmission of a serious disease--producing group A streptococcus clone: case reports and review

Invasive group A streptococcus (GAS) infections are emerging diseases; however, person-to-person transmission of invasive GAS producing life-threatening infection has been observed rarely. We report a small intrafamilial cluster of life-threatening GAS infections. A previously healthy 47-year-old father developed necrotizing fasciitis of the neck. Two days later, his 16-year-old daughter developed streptococcal angina, pneumonia, and pleural empyema. Both patients had signs of streptococcal toxic shock syndrome. Pulsed field gel electrophoresis revealed that the M6 strains of GAS isolated from the father and daughter had identical patterns. Cases of person-to-person transmission of invasive GAS infection reported in the literature are also reviewed.     

我国成功研制机载大气污染探测系统

正中国科学院合肥物质科学研究院安徽光学精密机械研究所成功研制出1种用于机载、可快速获取区域环境大气污染成分的环境大气成分探测系统,并通过了安徽省科技成果转化服务中心组织的科技成果鉴定。该机载环境大气成分探测系统由大气环境激光雷达、差分吸收光谱仪和多角度偏振辐射计及主控管理器等4个子系统组成。研究人员研制出了国内首台探测气溶胶和云的双波长偏振航空遥感激光雷达。     

Improvement of cyclodextrin glucanotransferase as an antistaling enzyme by error-prone PCR

In an effort to improve the properties of cyclodextrin glucanotransferase (CGTase) as an antistaling enzyme, error-prone PCR was used to introduce random mutations into a CGTase cloned from alkalophilic Bacillus sp. I-5 (CGTase I-5). A mutant CGTase[3-18] with the three mutations M234T, F259I and V591A was selected by agar plate assay. Sequence alignment of various CGTases indicated that M234 and F259 are located in the vicinity of the catalytic sites of the enzyme and V591 in the starch binding domain E. The cyclization activity of CGTase[3-18] was dramatically decreased by 10-fold, while the hydrolyzing activity was increased by up to 15-fold. These mutations near subsite +1 (M234T) and at subsite +2 (F259I) are likely to alter the enzyme activity in a concerted manner, promoting hydrolysis of substrate while retarding cyclization. The addition of CGTase[3-18] reduced the retrogradation rate of bread by as much as did the commercial antistaling enzyme Novamyl during 7-day storage at 4 degrees C. No cyclodextrin (CD) was detected in bread treated with CGTase[3-18], whereas 21 mg of CD per 10 g of bread was produced in bread treated with wild-type CGTase.     

γ‐Irradiation preparation of poly(acrylic acid)–chitosan hydrogels for in vitro drug release

Biocompatible and biodegradable pH‐responsive hydrogels based on poly(acrylic acid) and chitosan were prepared for controlled drug delivery. These interpolymeric hydrogels were synthesized by a γ‐irradiation polymerization technique. The degree of gelation was over 96% and increased as the chitosan or acrylic acid (AAc) content increased. The equilibrium swelling studies of hydrogels prepared under various conditions were carried out in an aqueous solution, and the pH sensitivity in a range of pH 1–12 was investigated. The AAc/chitosan hydrogels showed the highest water content when 30 vol % AAc and 0.1 wt % chitosan were irradiated with a 30 kGy dose of radiation. In addition, an increase of the degree of swelling with an increase in the pH was noticed and it had the highest value at pH 12. The drug 5‐fluorouracil was loaded into these hydrogels and the release studies were carried out in simulated gastric and intestinal fluids. The in vitro release profiles of the drugs showed that more than 90% of the loaded drugs were released in the first 1 h at intestinal pH and the rest of the drug was released slowly. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3270–3277, 2003     

Analysis of fracture mechanisms of ultrathin glass for flexible cover window under pen drop conditions

The fracture mechanism of a chemically strengthened ultrathin glass (UTG) for the cover window of flexible display devices was investigated under pen loading conditions for the first time to better understand the UTG impact resistance characteristics. High-speed camera analysis, fracture fragment analysis, and finite element modeling were employed to investigate the fracture mechanism of the UTG under pen drop conditions. A pen-on-plate (POP) test was also employed to examine the fracture characteristics under static loading condition, and its results were compared with those of the pen drop test (PDT) to find a correlation between the static and dynamic loading conditions. The correlation found between the POP and PDT tests indicates that a quantitative estimation of contact displacement under PDT can be obtained by measuring the first ring crack size, to more easily determine the impact resistance characteristics of UTG.