Characterization of C-S-H from Highly Reactive β-Dicalcium Silicate Prepared from Hillebrandite

β-dicalcium silicate synthesized by thermal dissociation of hydrothermally prepared hillebrandite (Ca₂(SiO₃)(OH)₂) exhibits extremely high hydration activity. Characterization of the hydrates obtained and investigation of the hydration mechanism was carried out with the aid of trimethylsilylation analysis, ²⁹Si magic angle spinning nuclear magnetic resonance, transmission electron microscopy selected area electron diffraction, and XRD. The silicate anion structure of C-S-H consisted mainly of a dimer and a single-chain polymer. Polymerization advances with increasing curing temperature and curing time. The C-S-H has an oriented fibrous structure and exhibits a 0.73-nm dreierketten in the longitudinal direction. On heating, the C-S-H dissociates to form β-C₂S. The temperature at which βC₂S begins to form decreases with increasing chain length of the C-S-H or as the Ca/Si ratio becomes higher. The high activity of β-C₂S is due to its large specific surface area and the fact that the hydration is chemical-reaction-rate-controlled until its completion. As a result, the hydration progresses in situ and C-S-H with a high Ca/Si ratio is formed.     

Pressurized fluidized-bed hydro retort ing of raw and beneficiated Eastern oil shales

Bench-scale tests were conducted with raw and beneficiated shales in an advanced multi-purpose research reactor. Raw Alabama shale and raw and beneficiated Indiana shales were retorted at 515 °C using hydrogen pressures of 4 and 7 MPa. Shale feed rates were 15 to 34 kg h⁻¹. High oil yields and carbon conversions were achieved in all tests. Oil yield from Alabama shale hydroretorted at 7 MPa was 200% of Fischer assay. Raw and beneficiated Indiana shales hydroretorted at 7 MPa produced oil yields of 170 and 195% of Fischer assay respectively. Total carbon conversions were >70% for all tests conducted at 7 MPa.     

Comparison of the genomic short regions of a vaccine strain (SA-2) and a virulent strain (CSW-1) of infectious laryngotracheitis virus (Gallid herpesvirus 1)

Restriction enzyme linkage maps were produced for the genomic short region of the virulent infectious laryngotracheitis virus (CSW-1 strain). After comparison with the equivalent restriction enzyme linkage maps for the infectious laryngotracheitis virus SA-2 strain (a vaccine strain), it was determined that the maps for the short regions of the two strains were identical, apart from a single section in each of the inverted terminal repeats. Each inverted terminal repeat of the SA-2 strain was discovered to contain 467 base pairs more DNA than the CSW-1 strain's inverted terminal repeats. This extra DNA was more precisely mapped entirely within the EcoRI fragments D and d of SA-2, which were found to form part of the SmaI fragments U and P of SA-2 and Q and b of SA-2 and to contain one SmaI restriction enzyme site.     

Electronic applications of high temperature superconductors

Over the last decade there have emerged many electronic applications of HTS technology which have important military as well as commercial implications. Examples of these include space communications, terrestrial wireless communications, radar, surveillance, countermeasures, medical applications and cryo-electronics. I will review many of the efforts in in this area that have been supported by the DoD which has invested over $350M on this technology. In addition I will discuss the efforts to develop cryocoolers to support the HTS technology.     

Crack Stability and Its Effect on Fracture Toughness of Hot-Pressed Silicon Nitride Beam Specimens

The effect of stable crack extension on fracture toughness test results was determined using single-edge precracked beam specimens. Crack growth stability was examined theoretically for bars loaded in three-point bending under displacement control. The calculations took into account the stiffness of both the specimen and the loading system. The results indicated that the stiffness of the testing system played a major role in crack growth stability. Accordingly, a test system and specimen dimensions were selected which would result in unstable or stable crack extension during the fracture toughness test, depending on the exact test conditions. Hot-pressed silicon nitride bend bars (NC132) were prepared with precracks of different lengths, resulting in specimens with different stiffnesses. The specimens with the shorter precracks and thus higher stiffness broke without stable crack extension, while those with longer cracks, and lower stiffness, broke after some stable crack extension. The fracture toughness values from the unstable tests were 10% higher than those from the stable tests. This difference, albeit small, is systematic and is not considered to be due to material or specimen-to-specimen variation. It is concluded that instability due to the stiffness of test system and specimen must be minimized to ensure some stable crack extension in a fracture toughness test of brittle materials in order to avoid inflated fracture toughness values.     

Computer-Aided Design of Corn Dryers With Quality Prediction

A new dynamic model of corn drying based on compartmental structure and quality prediction was built up from a thin layer model to industrial scale. From the system analysis to the programming, we focus mainly on numerical resolution of the equations and on the ergonomy of the software.     

Characterization of Dip-Coated Boron Nitride on Silicon Carbide Fibers

Amorphous boron nitride thin coatings (∼0.2 μm) have been formed on Nicalon and C-Nicaion (pre-carbon-coated Nicalon) yarns via dip coating in boric acid solution followed by heating and nitriding in NH₃gas at 1000°C. X-ray photoelectron spectroscopy (XPS) and Auger electron spec-troscopy (AES) studies have shown the formation of boron nitride. The coating was boron rich and contains oxygen. The N/B and O/B ratios range from 0.6 to 0.8 and from 0.1 to 0.25, respectively. Tensile strength measurements revealed that the BN-coated C-Nicalon yarn maintained ∼85% of its original strength while BN-coated Nicalon lost ∼85% of its original strength. Auger depth profiles showed that there was a consumption of carbon during the heating and nitridation process for both BN-coated Nicalon and C-Nicalon fibers. However, the depletion of carbon in BN-coated Nicalon fibers was much more severe than that in BN-coated C-Nicalon fibers.     

Percutaneous balloon pericardiotomy for patients with recurrent pericardial effusion: using a novel double-balloon technique with one long and one short balloon

Percutaneous balloon pericardiotomy is effective and less invasive for the treatment of recurrent pericardial effusion. This study suggests that the double-balloon method with 1 longer and 1 shorter balloon is the procedure of choice for percutaneous balloon pericardiotomy.