Infection and stage conversion during murine pulmonary toxoplasmosis: a study with three different strains of Toxoplasma gondii

OBJECTIVE: To investigate whether intravenously administered liposomal alpha-tocopherol can protect the lung from the injurious action of Escherichia coli lipopolysaccharide (LPS). DESIGN: Prospective, randomized animal study. SETTING: Government research laboratory. SUBJECTS: Twenty adult male Sprague-Dawley rats. INTERVENTIONS: Animals were intravenously pretreated with alpha-tocopherol liposomes (20 mg alpha-tocopherol/kg body weight), plain liposomes, or saline. Twenty-four hours later, pretreated animals were challenged with an intravenous injection of LPS (E. coli 0111:B4, 1 mg/kg body weight), and killed 2 hrs after LPS challenge. MEASUREMENTS AND MAIN RESULTS: Challenge of saline-pretreated animals with LPS resulted in lung injuries as evidenced by an increase in wet lung weight and a reduction in pulmonary angiotensin converting enzyme (25%) and alkaline phosphatase (28%), injury markers of lung endothelial and epithelial type II cells, respectively. Also, LPS administration resulted in an increase in pulmonary myeloperoxidase and protease activities, indicative of a neutrophilic inflammatory response. Pretreatment of animals with liposomal alpha-tocopherol significantly attenuated the LPS-induced edematous lung weight response, and reduced the extent of injuries to the pulmonary endothelial and epithelial cells, demonstrated by a significantly smaller reduction in the corresponding enzyme marker activities. CONCLUSION: These results suggest that augmentation of the pulmonary antioxidant status can ameliorate LPS-induced lung injuries mediated by oxidative stress mechanisms.     

Inhaled nitric oxide is not a myocardial depressant in a porcine model of heart failure

BACKGROUND: Inhaled nitric oxide has been shown to be a potent and selective pulmonary vasodilator. Reports of increases in left ventricular end-diastolic pressure and episodes of pulmonary edema during the clinical use of inhaled nitric oxide in patients with preexisting left ventricular dysfunction have raised concerns that this agent may have myocardial depressant effects. We therefore undertook a study of the effects of inhaled nitric oxide on myocardial contractility in a porcine model of ventricular failure and pulmonary hypertension. METHODS: After inducing heart failure in 10 pigs by rapid ventricular pacing, hemodynamic measurements and pressure-volume diagrams (by the conductance method) were obtained in six animals at baseline and during administration of inhaled nitric oxide at concentrations of 20 and 40 ppm. Myocardial contractile state was assessed by the end-systolic pressure-volume relationship and preload-recruitable stroke work, whereas diastolic function was measured in terms of the end-diastolic pressure-volume relationship and the pressure decay time constant T. RESULTS: Baseline hemodynamics reflected heart failure and pulmonary hypertension, and inhaled nitric oxide induced significant reductions in mean pulmonary artery pressure and pulmonary vascular resistance. Although left ventricular end-diastolic pressure increased during administration of inhaled nitric oxide, no changes were observed in measures of systolic or diastolic function. CONCLUSIONS: Inhaled nitric oxide reduced pulmonary vascular resistance but did not alter myocardial contractility or diastolic function. Increases in left ventricular end-diastolic pressure during inhaled nitric oxide therapy are therefore not due to myocardial depression and may be related to increases in volume delivery to the left side of the heart resulting from reduced pulmonary vascular resistance.     

Isolation of translactone-containing triterpenes with thrombin inhibitory activities from the leaves of Lantana camara

Methanolic extracts prepared from the leaves of Lantana camara have been found to inhibit human thrombin. An assay, in which thrombin activity is measured as a function of clot formation from fibrinogen, was used to guide the fractionation and purification of five principal active constituents (1-5), which were all characterized as 5,5-trans-fused cyclic lactone-containing euphane triterpenes.     

Enhancement of adenovirus-mediated gene transfer to human bone marrow cells

Adenovirus infection of CD34+ hematopoietic stem/progenitor cells is dependent on the multiplicity of infection (MOI), time of incubation, the volume in which the co-incubation occurs and the presence or absence of growth factors. Studies revealed that a brief co-incubation (1-8 hours), resulted in low levels of transgene expression, suggesting that adenovirus infection of CD34+ cells occurs slowly, and optimal transduction requires a 24 hour exposure to adenovirus. Infection by Ad/beta-gal or Ad/p53 at a MOI of 500:1 provided a high transduction efficiency but inhibited hematopoietic function. However, treatment at a MOI of 50-100 resulted in efficient transduction (10.7-15.7% positive) without detectable toxicity. Secondary proof of adenovirus transgene expression was demonstrated by detection of mRNA for p53 in Ad/p53 infected stem cells. We conclude that a 24 hour exposure to recombinant adenovirus encoding p53 or beta-gal, at a MOI of 50-100 is optimal for in vitro gene transfer to BM cells and has no significant effect on hematopoietic function. Adenovirus-mediated transduction of BM cells can also be modulated by growth factors (IL-3, GM-CSF and G-CSF) with improved gene delivery and maintenance of hematopoietic function. In summary, adenovirus vectors can be used to transiently transduce stem cells, and conditions have been defined to maximize expression and limit inhibitory effects on CD34+ cells. These data support continued investigation of this vector for local cytokine delivery and purging of stem cell products.     

Effect of ergotamine and ergonovine on plasma concentrations of thyroid hormones and cortisol in cattle

Plasma samples from two experiments were processed to determine whether ergot alkaloids associated with endophyte-infected tall fescue altered peripheral thyroxine (T4), triiodothyronine (T3), or cortisol concentrations in cattle. In Exp. 1, seven Angus steers (294 kg) received i.v. bolus injections of saline (SAL), ergonovine maleate (7 mg; EM), or ergotamine tartrate (7 mg; ET) at weekly intervals, and they received all treatments during the study. Blood was sampled every 15 min for 5 h, and treatments were given after h 1. Mean ambient temperature was 34 degrees C. Treatment x time affected plasma concentrations of T3 (P < .05) and of cortisol (P < .001) but not that of T4 (P > .2). Plasma T3 concentrations were not affected by SAL, whereas concentrations increased (P < .01) after either EM or ET treatment. Plasma cortisol concentrations were not altered by SAL or EM, but they were increased (P < .001) by ET treatment. In Exp. 2, six Holstein cows (499 kg) nursing calves received a bolus i.v. injection of SAL, EM (9.5 mg), or ET (9.5 mg) per estrous cycle, and all treatments were given over three cycles. Blood was sampled every 20 min for 5 h; treatments were given after h 1. Mean ambient temperature was 26 degrees C. Treatment x time affected T3 (P = .08) and cortisol (P < .001) and tended to influence (P = .16) T4 concentrations. Plasma T3, T4, and cortisol concentrations were not influenced by SAL treatment. Plasma T3 was higher (P < or = .01) after EM or ET treatment compared with pretreatment concentrations. Concentrations of T4 during the 4 h after EM and ET were increased (P < .001) compared with pretreatment. Plasma cortisol concentrations were not altered by EM but were increased (P < .001) by ET. Ergot alkaloids implicated as contributing agents to fescue toxicosis alter plasma concentrations of hormones important to metabolic and thermoregulatory functions in cattle.     

Coefficients of dynamic friction and the mechanical melting mechanism for vinylidene chloride copolymers

Previous research and this research indicate that the mechanical melting for poly(vinylidene chloride) copolymers (PVDC) is complex. Mechanical melting is defined as the melting (or devitrification) of a polymer when a significant portion of the thermal energy originates from a mechanical energy dissipative process. PVDC mechanically melted on a moving metal surface at temperatures of the test instrument that were considerably lower than the differential scanning calorimetry (DSC) onset melting temperature. PVDC formulated with low levels of high density polyethylene (HDPE), however, melted at metal temperatures near the DSC onset melting temperature. Two different mechanical melting mechanisms are proposed to explan the data, and the frictional data are discussed with respect to solids conveying in a single-screw, plasticating extruder.     

Ion microbeam radiation system

An ion microbeam radiation test system has been built for studying radiation-induced charge collection and single event upsets in advanced semiconductor circuits. With this system, it is possible to direct an ion beam of a diameter as small as 1 μm onto a circuit or test structure with a placement accuracy of 1 μm. The components of the system and its operation are described. Applications are described which demonstrate the capabilities of the system     

Clinical utility of the polymerase chain reaction in the diagnosis of extrapulmonary tuberculosis

This study examines the diagnostic utility of the polymerase chain reaction (PCR) in 156 patients (five human immunodeficiency virus (HIV) seropositive) suspected of extrapulmonary tuberculosis. The results of PCR in 226 samples from 11 different sites were compared with the results of microscopy and culture. Positive culture results were predicted in 86% of samples by PCR but in only 31% by microscopy. Specificity of PCR was 92%. In cases with culture-proven tuberculosis, PCR identified all 11 microscopy positive cases and 19 of 24 (79%) of the microscopy-negative cases. In four patients, PCR excluded the diagnosis of tuberculosis in microscopy-positive samples, which were later shown to contain mycobacteria other than Mycobacterium tuberculosis or laboratory contaminants. In 20 patients (microscopy, PCR and culture negative) a trial of antituberculous drugs was given, but patients showed no improvement and treatment was stopped. In 17 patients, all culture negative (in nine PCR was positive, three of whom also had positive microscopy) the diagnosis was probable tuberculosis based on clinical findings and response to treatment. This polymerase chain reaction has a much higher sensitivity than microscopy and can facilitate therapeutic decisions for those with suspected extrapulmonary tuberculosis.     

The induction of preferred orientation in a liquid crystal co-polyester by extrusion and drawing

It is shown that liquid crystal polyester can be extruded and drawn from the melt into fine fibres which possess stiffnesses up to 68 GPa. Thicker fibres with smaller draw ratios have correspondingly lower stiffnesses, which are correlated with molecular alignments characterized by flat plate X-ray diffraction. Fibres with a range of diameters were heat-treated over a range of temperatures to determine the effect of annealing on preferred orientation and stiffness. Heat-treatment of as-spun fibres produced maxima in axial stiffness at 170° C, corresponding to an increase in preferred orientation, and 270° C, corresponding to the development of quasi-crystalline order which is analysed. Scanning electron microscopy showed the existence of needle-like domains of approximately circular cross section up to 0.8 m in diameter. These were aligned in the direction of drawing in contrast to being haphazardly arranged in a hot rolled specimen displaying no preferred orientation.     

Some mechanical properties of an epoxy resin system cured with multiple crosslinking agents

Arbitrary cure times and glass transition temperatures are reported for an epoxy resin cocrosslinked by various weight fractions of hexamethylenediamine (HMDA) and m-phenylenediamine (m-PLDA). The glass transition temperatures of the epoxy resin systems studied yielded an excellent fit to an empirical equation developed by Dyvik for copolymers. The cure time parameters were found to be a linear function of the weight fractions of each crosslinking agent present. The mechanical properties of the epoxy resins were measured by an in situ dynamic modulus technique which employed the use of a resin-coated metallic substrate.