论网络升级方式与光纤选择的关系

在重点说明影响传输光纤设计的主要问题的同时，简要介绍了各种升级方式所面临的主要技术挑战，并详细说明这些挑战对传输光纤提出的技术要求。     

The tail of localized states in the band gap of the quantum well in the In0.2Ga0.8N/GaN system and its effect on the laser-excited photoluminescence spectrum

Semiconductors - It is established experimentally that the peak in the photoluminescence spectrum of the In0.2Ga0.8N/GaN heterostructure with a quantum well shifts by ～150 meV as the power...     

The Effect of Polymer Optoelectronic Properties on the Performance of Multilayer Hybrid Polymer/TiO2 Solar Cells

We report a study of the effects of polymer optoelectronic properties on the performance of photovoltaic devices consisting of nanocrystalline TiO₂ and a conjugated polymer. Three different poly(2‐methoxy‐5‐(2′‐ethylhexoxy)‐1,4‐phenylenevinylene) (MEH‐PPV)‐based polymers and a fluorene–bithiophene copolymer are compared. We use photoluminescence quenching, time‐of‐flight mobility measurements, and optical spectroscopy to characterize the exciton‐transport, charge‐transport, and light‐harvesting properties, respectively, of the polymers, and correlate these material properties with photovoltaic‐device performance. We find that photocurrent is primarily limited by the photogeneration rate and by the quality of the interfaces, rather than by hole transport in the polymer. We have also studied the photovoltaic performance of these TiO₂/polymer devices as a function of the fabrication route and device design. Including a dip‐coating step before spin‐coating the polymer leads to excellent polymer penetration into highly structured TiO₂ networks, as was confirmed through transient optical measurements of the photoinduced charge‐transfer yield and recombination kinetics. Device performance is further improved for all material combinations studied, by introducing a layer of poly(ethylene dioxythiophene) (PEDOT) doped with poly(styrene sulfonic acid) (PSS) under the top contact. Optimized devices incorporating the additional dip‐coated and PEDOT:PSS layers produced a short‐circuit current density of about 1 mA cm^–2, a fill factor of 0.50, and an open‐circuit voltage of 0.86 V under simulated AM 1.5 illumination (100 mW cm^–2, 1 sun). The corresponding power conversion efficiency under 1 sun was ≥ 0.4 %.     

Gain measurements in 1.3 µm InGaAsP-InP double heterostructure lasers

The net gain per unit length (G) versus current (I) is measured at various temperatures for 1.3 μm InGaAsP-InP double heterostructure lasers.Gis found to vary linearly with the currentIat a given temperature. The gain bandwidth is found to decrease with decreasing temperature. The lasing photon energy decreases at 0.325 meV/K with increasing temperature. Also, the slopedG/dIat the lasing photon energies decreases with increasing temperature. This decrease is more rapid forT > sim210K. This faster decrease is consistent with the observed higher temperature dependence of threshold (low T0at high temperatures) of 1.3 μm InGaAsP lasers. A carrier loss mechanism, due to Auger recombination, also predicts thatdG/dIshould decrease much faster with increasing temperature at high temperatures. We also find that the slopedG/dIdecreases slowly with increasing temperature for a GaAs laser, which is consistent with the observed temperature dependence of threshold of these lasers.     

A Microcomputer-Based Differential Lung Ventilation System

In order to provide a versatile means of delivering differential lung ventilation (DLV), a computer-controlled system was constructed to allow a variety of ventilation protocols as well as to record and monitor relevant physiologic parameters. Two Siemens servo ventilators were modified for synchronous operation and computer control of minute volume and respiratory rate. Twenty-five parameters on the two lungs were collected every breath. Feedback control was used to adjust respiratory rate to maintain PaCO2 = 35 torr and to keep total tidal volume equal to 15 mI/kg. Three differential volume delivery protocols were established. The DLV system was evaluated in a study involving eighteen mongrel dogs (six dogs for each volume delivery protocol), each with a unilateral lung injury caused by an infusion of 0.1 N HOC through the endobronchial tube. This system has proven to be a highly effective and versatile means of providing differential ventilation as well as precise feedback control of essential physiologic parameters such as PaCO2 and tidal volume. The system handles automated data collection of all relevant physiological parameters, making graphical as well as statistical analysis extremely easy.     

Effect of simulated freeze damage on soybean seed composition and functionality

Two soybean varieties (Beeson and Williams) were harvested at various maturation levels by applying paraquat directly to the growing plant. The application of this herbicide to arrest growth was used to simulate freeze damage. The free fatty content and the photometric index declined from 0.61% to 0.19% and 301.56 to 201.90, respectively, as maturation progressed for the Beeson variety. Similar trends were found with the Williams variety. However, the amount of trypsin inhibitor differed between the two varieties depending upon maturation level.     

Scene categorization based on local–global feature fusion and multi-scale multi-spatial resolution encoding

With the bag-of-contextual-visual-word (BOCVW) models, we propose a scene categorization method based on local–global feature fusion and multi-scale multi-spatial resolution encoding. First, the performances of the BOCVW models belonging to different features are mutually reinforced by fusing other types of features within local regions. Then, the spatial configuration information is explored using a multi-scale multi-spatial resolution encoding approach. Furthermore, these encoded BOCVW models are globally fused using an improved maximum-margin optimization strategy, which considers the margin between input vectors of different categories and the diameter of the smallest ball containing feature vectors simultaneously. The proposed method has been evaluated on three scene categorization datasets consisting of scene categories 8, 15, and 67, respectively. And its effectiveness has been verified by these experimental results.     

Non‐Geminate Recombination as the Primary Determinant of Open‐Circuit Voltage in Polythiophene:Fullerene Blend Solar Cells: an Analysis of the Influence of Device Processing Conditions

The physical origin of the open‐circuit voltage in bulk heterojunction solar cells is still not well understood. While significant evidence exists to indicate that the open‐circuit voltage is limited by the molecular orbital energies of the heterojunction components, it is clear that this picture is not sufficient to explain the significant variations which often occur between cells fabricated from the same heterojunction components. We present here an analysis of the variation in open‐circuit voltage between 0.4–0.65 V observed for a range of P3HT/PCBM solar cells where device deposition conditions, electrode structure, active‐layer thickness and device polarity are varied. The analysis quantifies non‐geminate recombination losses of dissociated carriers in these cells, measured under device operating conditions. It is found that at open‐circuit, losses due to non‐geminate recombination are sufficiently large that other loss pathways may effectively be neglected. Variations in open‐circuit voltage between different devices are shown to arise from differences in the rate coefficient for non‐geminate recombination, and from differences in the charge densities in the photoactive layer of the device. The origin of these differences is discussed, particularly with regard to variations in film microstructure. By separately quantifying these differences in rate coefficient and charge density, and by application of a simple physical model based upon the assumption that open‐circuit is reached when the flux of charge photogeneration is matched by the flux of non‐geminate recombination, we are able to calculate correctly the open‐circuit voltage for all the cells studied to within an accuracy of ±5 mV.     

手工式模拟设计获得自动化辅助

模拟仿真器与设计捕捉工具在EDA市场已有长久的历史,这个市场一直在为数字仿真器增加某些Spice。不过,当仿真结果要转换为正弦波和硅片时,模拟EDA工具就会远远落后于数字EDA工具的水平。这种情况正在开始改变,传统数字EDA供应商正在出现以纳米尺度数字工艺支持模拟功能晶圆制作的工具。另外,代工厂专用工具包也正在简化用模拟工艺实现模拟、RF大电压功能的过程。     

Dielectric spectroscopy of fresh fruit and vegetable tissues from 10 to 1800 MHz.

Dielectric spectroscopy data from measurements on tissue samples of nine fresh fruits and vegetables were used to study their dielectric behavior over the frequency range from 10 MHz to 1.8 GHz at 5 to 65 degrees C. Dielectric constant and loss-factor data are presented graphically for apple, avocado, banana, cantaloupe, carrot, cucumber, grape, orange, and potato, showing dielectric constants ranging from values of several hundred at 10 MHz to less than 100 at 1.8 GHz and loss factors on the order of one thousand at 10 MHz to less than 20 at 1.8 GHz. The dielectric loss factor increased consistently with increasing temperature at frequencies below 1 GHz. The dielectric constant increased with temperature at lower frequencies, but it decreased with temperature at the higher frequencies. This reversal of the sign of the temperature coefficient occurred at some point in the frequency range between 20 and 120 MHz where the temperature dependence of the dielectric constant was zero. At frequencies below this point, ionic conduction dominates the dielectric behavior, but above that point dipolar relaxation appears to control the behavior. Multiple linear regression provided equations for calculation of the loss factor in the frequency range from 10 to 300 MHz at temperatures from 5 to 65 degrees C. The data provide new information useful in understanding dielectric heating behavior and evaluating dielectric properties of such agricultural products for quality sensing applications.