Improved approaches to the exact solution of the machine covering problem

For the basic problem of scheduling a set of n independent jobs on a set of m identical parallel machines with the objective of maximizing the minimum machine completion time—also referred to as machine covering—we propose a new exact branch-and-bound algorithm. Its most distinctive components are a different symmetry-breaking solution representation, enhanced lower and upper bounds, and effective novel dominance criteria derived from structural patterns of optimal schedules. Results of a comprehensive computational study conducted on benchmark instances attest to the effectiveness of our approach, particularly for small ratios of n to m.     

Enhancement of Upconverted Fluorescence by Interference Layers

Upconverting nanoparticles show potential applications in the field of photovoltaics and array‐based detection devices. While fluorescence enhancement using interference of incident radiation is well known in Stokes‐shift type systems such as fluorescent dyes; the effect of such interference geometry in nonlinear Anti‐Stokes type emission, such as in upconversion rare earth photophysics is demonstrated for the first time. This work describes in detail the influence of the interference modulation on both the excitation (interion energy transfer) and radiative decay with nonradiative decay processes active between emissive levels. These effects are illustrated in the thickness dependence of the decay rate and rise time. Single particle upconverted spectra and time‐resolved measurements show concurrent optimization of the infrared absorption and emission at 540 and 650 nm, with an average enhanced emission of 20 times at λ = 540 and 45 times at λ = 650 nm, dependent on the interference layer thickness and on the excitation intensity. The experimental results are correlated with finite element modeling. Both experiments and calculations show emission enhancement at an interference layer thickness of about 740 ± 20 nm, where such tolerance and the planar design, leads to ease in implementation in applications.     

Production of surfactant protein C in the baculovirus expression system: the information required for correct folding and palmitoylation of SP-C is contained within the mature sequence

Surfactant protein C (SP-C) is synthesized in the alveolar type II cells of the lung as a 21 kDa propeptide which is proteolytically processed to a 4.2 kDa mature active form. The main function of this extremely hydrophobic protein is to enhance lipid insertion into the air/liquid interface in the lung upon inhalation. This is necessary to maintain a relatively low surface tension at this interface during breathing. In this report we describe the production of mature human SP-C in the baculovirus expression system. The recombinant protein contains a secondary structure with a high alpha-helical content (73%), comparable to native SP-C, as determined by circular dichroism and attenuated total reflection Fourier transform infrared analysis. The expressed protein is a mixture of dipalmitoylated (15%) and non-palmitoylated SP-C. This suggests that the information required for palmitoylation is contained within the sequence of the mature protein. The activity of the protein to insert phospholipids into a preformed monolayer of lipids at an air/liquid interface was determined with a captive bubble surfactometer. Recombinant SP-C significantly reduced the surface tension at the air/liquid interface during dynamic expansion and compression. We conclude that correctly folded, dipalmitoylated and active SP-C can be expressed in the baculovirus expression system. Our results may facilitate investigations into the relation between structure and function of SP-C and into protein palmitoylation in general.     

Microstructural Evolution of Silica on Single Crystal Silicon Carbide. Part II: Influence of Impurities and Defects

Passive oxidation of single crystal silicon carbide (6H–SiC) resulted in the formation of a vitreous silica layer which crystallized gradually at temperatures near 1300°–1400°C. During this process, statistically distributed devitrification centers appeared and disk-like aligned crystal plates (radialites) formed. The crystallization process did not necessarily start at structural defects although these often act as areas of preferred nucleation. A second structural transition from disk-like radialites to small crystalline spheres (globulites) was not connected to structural defects but a consequence of the presence of impurities. Alkaline and earth-alkaline elements are common contaminations within the atmospheres of typical furnaces fitted with alumina tubes. Globulite formation was a process of recrystallization catalyzed by an impurity-related melt formed on top of the devitrified areas. Crystallization caused exsolution of reaction gas and local impurity enrichments as the solubility for these phases is much higher in the devitrifying vitreous silica matrix. Both clean and impurity-loaded oxidation produced specific morphologies of scales and interfaces.     

Abnormalities of auditory evoked magnetic fields and structural changes in the left hemisphere of male schizophrenics--a magnetoencephalographic-magnetic resonance imaging study

Functional and structural changes in 10 DSM-III-R male schizophrenics and 10 healthy volunteers were investigated using magnetoencephalographically (MEG) detected long-latency (N100 m) auditory evoked fields (AEFs) and magnetic resonance imaging (MRI). The AEFs were characterized by single moving equivalent dipoles, which were superimposed on MRIs. There were significant differences in dipole orientations and in AEF latencies in the left hemisphere of schizophrenics, when compared to the controls. The MEG-detected alterations were found to be associated with a bilateral volume reduction of the posterior superior temporal gyrus (pSTG), which was more pronounced in the left hemisphere. Separate analysis of white and gray matter has shown that the pSTG volume reduction resulted from decreased gray matter volumes without white matter changes. Both the functional and the morphological data indicate a left-hemispheric disturbance in our patients.     

Active electronic cochlear implants for middle and inner ear hearing loss--a new era in ear surgery. I: Basic principles and recommendations on nomenclature

Hearing aids have fundamental disadvantages: (1) stigmatization of the patient; (2) the sound is often found to be unsatisfactory due to the limited frequency range and undesired distortion; (3) in many patients, the ear canal fitting device generally necessary leads to an occlusion effect; (4) acoustic feedback when amplification is high. Conventional hearing aids transmit sound into the ear canal via a small microphone. Sound has the disadvantage of requiring high output sound pressure levels for its transmission. This along with the necessary miniaturization of the loudspeaker as well as the resonances and reflections in the closed ear canal contribute to the disadvantages mentioned. In contrast, implantable hearing aids do not make sound signals but micromechanical vibrations. An implantable hearing aid has an electromechanical transducer instead of the loudspeaker of a conventional hearing aid. The hearing signal does not leave the transducer as sound but as a mechanical vibration which is directly coupled to the auditory system bypassing the air. This implantable hearing aid is either coupled to the tympanic membrane, the ossicular chain, the perilymph of the inner ear, or the skull. An implantable hearing aid is expected to have: 1 Better sound fidelity than a hearing aid 2 No ear canal fitting device, free ear canal 3 No feedback 4 Invisibility Requirements on electronic hearing implants designed for patients with conductive hearing loss differ from those on implants for sensorineural hearing loss. Conductive hearing loss requires the implant to replace the impedance transformation, thus being an impedance transformation implant (ITI). In various respects, the demands on an ITI are lower than the demands on an electronic hearing aid for patients with sensorineural hearing loss. The latter are mostly patients with a failure of the cochlea amplifier (CA). A damage to the CA is clinically discernible by a positive recruitment and loss of otoacoustic emissions (OAE). Since these patients form the majority of cases with sensorineural hearing loss, an active hearing implant for such patients should partially replace the function of the CA. Therefore, the suggestion is to refer to a CAI (cochlea amplifier implant). The implant expressions ITI (for patients with conductive hearing loss) and CAI (for patients with sensorineural hearing loss) used in this context allow nomenclatural association with the CI (cochlear implant) for complete inner ear failure as well as with the BSI (brainstem implant) in the case of hearing nerve failure.