Printing Reconfigurable Bundles of Dielectric Elastomer Fibers

Active soft materials that change shape on demand are of interest for a myriad of applications, including soft robotics, biomedical devices, and adaptive systems. Despite recent advances, the ability to rapidly design and fabricate active matter in complex, reconfigurable layouts remains challenging. Here, the 3D printing of core-sheath-shell dielectric elastomer fibers (DEF) and fiber bundles with programmable actuation is reported. Complex shape morphing responses are achieved by printing individually addressable fibers within 3D architectures, including vertical coils and fiber bundles. These DEF devices exhibit resonance frequencies up to 700 Hz and lifetimes exceeding 2.6 million cycles. The multimaterial, multicore-shell 3D printing method opens new avenues for creating active soft matter with fast programable actuation.     

Experimental Study of Capture Effect for Medium Access Control with ALOHA

In this paper, we investigate the capture effect through experiments conducted with Iris nodes equipped with AT86RF230 radio transceivers. It is shown that the first arriving packet in a collision can capture the radio channel for equal power transmissions and may be decoded depending on the amount of overlap. A new 3‐packet‐capture scenario is introduced and implemented. To be able to understand the impact of capture on the throughput performance of wireless sensor networks, we present an analysis of the capture coefficient using our practical results. For real‐world implementations, the throughput of pure ALOHA considering a finite number of users is presented in analytical form. The capture coefficient is then applied to pure ALOHA as a case study. Using analytical and practical implementations of the capture effect on ALOHA, a very good match in channel throughput performance enhancement is demonstrated over the non‐capture effect case. TinyOS‐2.x is used to program the nodes and to observe data exchange on a computer through a base station.     

Quantitative ECT: Comparison of Recovery Coefficient and Linearity of Detector Response for Single Photon and Coincidence Detection (F-18, B+ 511 keV)

The response characteristics of two tomographic systems were compared for imaging of positron emitters: a) a SPECT system with a 3/8 in crystal and 511 keV detector shielding, equipped with a specially designed 511 keV collimator, and b) a PET V system using coincidence detection. SPECT transverse plane resolution was 19 mm FWHM and 35 mm FWTM for a radius of rotation of 16 cm. Corresponding resolution for PET was 14 mm FWHM and 28 mm FWTM. Transverse images through a phantom containing cylindrical sources of various cross sections and uniform activity were obtained for each detector. The measured count density or recovery coefficient was found to decrease with source size, the dependence being similar for both systems. The theoretical values for recovery coefficients were calculated by convolution of a Gaussian fit to the SPECT resolution (FWHM, FWTM) values with the uniform cross section of each source. This simple mathematical model confirmed that the recovery coefficient dependence on source size was primarily related to the limited resolution of the detector. Experimental measurements demonstrated that the SPECT resolution for volume sources was sufficient for quantitation, although some limitations exist with respect to source sizes smaller than the detector resolution.     

Effects of testosterone implants in pregnant ewes on their female offspring

Optimal conditions for using high-performance liquid chromatography (HPLC) in the size exclusion mode have been determined for measuring the molecular-weight (MW) distribution of chitosan samples. Physical separation according to molecular size was accomplished on the stationary phase of glass supports having controlled pore sizes ranging from 2500 to 40 A. Selection of column combinations was based on the requirements to resolve the higher MW fraction of chitosan and to give a linear calibration curve within the required MW range. The best combination of glass pore sizes and column lengths in two foot sections joined sequentially was: 2500 A (2 ft.), 1500 A (4 ft.), 550 A (6 ft.), 250 A (2 ft), 100 A (2 ft.), and 40 A (2 ft.). A loading study showed that an injection load of 500 mug, i.e. 100 mul at 5 g/l or 50 mul at 10 g/l (w/v), was the optimal load to give reproducible elution volumes, precision in quantitation, and minimum viscosity effects. The best calibration curve using defined dextran standards was obtained from the geometric mean of Mw (weight average MW) and Mn (number average MW) values and peak elution volumes. Precision in determining MW distribution of chitosan as well as dextran standards was better than 5% relative standard deviation, and the differences between these results and the manufacturer's data on the dextran standards were 6 to -17%. The MW distribution of a selected chitosan samples in 2% acetic acid thus determined was Mw = 2,055,000, Mn = 936,000, dispersity = 2.16, and the most abundant species was around 1,103,000. Analysis time for the HPLC separation was less than 20 min per sample. Chitosan is an effective coagulating agent for the treatment of food processing wastes and activated sludge from biological treatment systems. It is manufactured from chitin in shrimp and crab wastes. The rapid methods developed here for determining the MW distribution of chitosan preparations will be used to optimize the manufacturing process and guide the selection of more effective chitosan products.     

Selenium and vitamin E and incidence of retained placenta in parturient dairy cows. II. Prevention in commercial herds with prepartum treatment

In a series of field experiments in Ohio involving 193 parturient cows of the Holstein and Guernsey breeds, the prophylactic efficacy of selenium and vitamin E was tested under field conditions. Herds initially were chosen because of a chronic problem with retained placenta which could not be related to a known etiological factor. Each herd was divided into three groups. Group A received an injection of 50 mg of sodium selenite 40 days prepartum and 680 units of alpha tocopherol acetate followed by the same treatment 20 days prepartum. Group B received a single injection of 50 mg of sodium selenite 20 days prepartum, and 680 IU of vitamin E. Group C served as the control. Incidence of retained placenta was reduced from a mean of 51.2% in control cows to 8.8% for animals injected with selenium and vitamin E. No differences in efficacy were between Group A and B, and it appears that the single 20 day prepartum injection of 50 mg of sodium selenite and 680 IU of alpha tocopherol acetate is an effective prophylactic for prevention of retained placenta.     

In Trinidad: angular stomatitis and pregnancy

Riboflavin deficiency is endemic in Trinidad. A syndrome is observed peculiar to pregnancy. It occurs in the second trimester in women with low blood riboflavin levels. Treatment with riboflavin gives clinical improvement in mothers and raises fetal blood levels. Early biochemical diagnosis and treatment of subclinical deficiency is of value to the Trinidadian mother but protection to the fetus is doubtful. This is because of the effect of multiple limiting factors in which the mother is deficient.     

Synthesis of the second component of complement by long-term primary cultures of human monocytes

A method has been developed for preparation of confluent monolayers of human monocytes from small volumes of blood and for maintenance of these pure monocyte cultures for up to 16 wk in vitro. These cells phagocytosed 5.7 mum diameter latex beads, rosetted with erythrocytes coated with IgG or with C3, killed Listeria monocytogenes, and synthesized both lysozyme and the second component of complement. Lysozyme was secreted at a rate of approximately 50,000 mol/min per cell for at least 12 wk in cultures. The maximal rate of C2 synthesis and secretion was considerably less; i.e., approximately 30 mol/min per cell between the 2nd and 12th wk in culture. Monocytes produced little C2 during the first 6 days in culture after which a marked increase in the rate of C2 production was noted. This increase was coincident with morphologic evidence of monocyte maturation.     

Gonadoblastoma: clinicopathologic correlation in six patients

Six patients with a total of nine gonadoblastomas are presented; three--and possibly a fourth--had dysgerminomatous overgrowth which was massive in two patients. Calcification detected by abdominal films was present in three sufficient for preoperative diagnosis. All patients were found to have a Y stem line on peripheral leukocyte chromosome cultures except one patient, who had a 46 XX/45 XO karyotype. She was found to have Y chromatin bodies in the germ cells of her tumor which was in a normal ovary found at exploration for an ectopic pregnancy. Three were found in virilized phenotypic females investigated for amenorrhea, and two for therapy of pelvic masses due to dysgerminomatous overgrowth. Y chromatin studies are reported on gonadal tissue.