Photocatalytic degradation of dyes and organic contaminants in water using nanocrystalline anatase and rutile TiO2

Nanocrystalline TiO₂ was synthesized by controlled hydrolysis of titanium tetraisopropoxide. The anatase phase was converted to rutile phase by thermal treatment at 1023 K for 11 h. The catalysts were characterized by X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), Fourier-transform infrared absorption spectrophotometry (FT-IR) and N₂ adsorption (BET) at 77 K. This study compare the photocatalytic activity of the anatase and rutile phases of nanocrystalline TiO₂ for the degradation of acetophenone, nitrobenzene, methylene blue and malachite green present in aqueous solutions. The initial rate of degradation was calculated to compare the photocatalytic activity of anatase and rutile nanocrystalline TiO₂ for the degradation of different substances under ultraviolet light irradiation. The higher photocatalytic activity was obtained in anatase phase TiO₂ for the degradation of all substances as compared with rutile phase. It is concluded that the higher photocatalytic activity in anatase TiO₂ is due to parameters like band-gap, number of hydroxyl groups, surface area and porosity of the catalyst.     

Plasma etching of copper films at low temperature

Experimental verification of a low temperature (<20 °C), reactive plasma etch process for copper films is presented. The plasma etch process, proposed previously from a thermochemical analysis of the Cu-Cl-H system, is executed in two steps. In the first step, copper films are exposed to a Cl₂ plasma to preferentially form CuCl₂, which is volatilized as Cu₃Cl₃ by exposure to a H₂ plasma in the second step. Plasma etching of thin films (9 nm) and thicker films (400 nm) of copper has been performed; chemical composition of sample surfaces before and after etching has been determined by X-ray photoelectron and flame atomic absorption spectroscopies.     

Benefits of the use of impairment constraint routing in optical networks

In transparent optical networks, the optical signal accumulates the effects of all physical impairments present along the path it traverses. The conventional selection of signal paths based on e.g. shortest path routing without considering the signal quality and its association with the physical impairments does not always provide the optimum solution in terms of network performance such as blocking and resource utilization. This paper proposes an impairment constraint based routing algorithm to achieve an optimal combination of physical and networking performance taking into account all physical linear impairments including noise, chromatic and polarization mode dispersion, crosstalk and filter concatenation effects in an integrated approach. The performance of a typical metropolitan area network is examined and the improvement achieved when using the proposed approach compared to the conventional shortest path routing is demonstrated.     

Size dependent optical characteristics of chemically deposited nanostructured ZnS thin films

ZnS thin films of different thicknesses were prepared by chemical bath deposition using thiourea and zinc acetate as S²⁻ and Zn²⁺ source. The effect of film thickness on the optical and structural properties was studied. The optical absorption studies in the wavelength range 250–750 nm show that band gap energy of ZnS increases from 3·68–4·10 eV as thickness varied from 332–76 nm. The structural estimation shows variation in grain size from 6·9–17·8 nm with thickness. The thermoemf measurement indicates that films prepared by this method are of n-type.     

Tropospheric ozone variability over the Indian coastline and adjacent land and sea

A tropospheric ozone variability study is carried out to investigate the spatial and temporal distribution over the coastline of the Indian peninsula and adjacent land and sea using NASA Langley Tropospheric Ozone Residual data set for the period 1979–2005. A strong seasonal cycle has been observed with large variation (～ 55%) over the upper eastern coast, followed by the upper and lower western coast, compared to the lower eastern coast (～ 33%). A negative gradient in ozone concentration is observed along eastern and western coasts during summer (slope ～ –0.78 and –0.65) and a positive gradient (slope ～ 0.16 and 0.21) during winter. The same is observed over the adjacent land and sea along the coastline with slight variation. This change in gradient can be attributed to the anthropogenic emission of precursor gases that reinforce localized photochemical production of ozone. In addition, topography, transport, seasonality of emission of precursor gases and the solar insolation cycle play a vital role.     

Preparation and characterization of crosslinked chitosan microspheres for the colonic delivery of 5-fluorouracil

In this work, we attempted to develop a simple and inexpensive colon specific pulsatile drug-delivery system using chitosan microspheres loaded with 5-fluorouracil (5-FU) using an enteric-coated soft gelatin capsule. Chemical crosslinking by glutaraldehyde and interactions between the polymer and the drug were determined by Fourier transform infrared spectral study. Scanning electron microscopy of the microspheres revealed spherical shapes with smooth surfaces. Differential scanning calorimetry studies confirmed the molecular dispersion of the drug in the polymer matrix. Three different formulations (i.e., F1, F2, and F3) were prepared by the variation of the amount of 5-FU. Encapsulation efficiencies of 5.5, 10.8, and 17.9% for drug loadings of 10, 20, and 50%, respectively, were obtained. In vitro release studies were conducted at pH 1.2 and pH 7.4 (to simulate actual gastrointestinal fluid and gastrointestinal tract conditions, respectively). The results indicate that chitosan microspheres released 5-FU in both acidic (60%) and basic pH (40%) conditions, whereas the capsule (filled with chitosan microspheres) showed only 8–10% release in acidic media and nearly 90% in basic media within 12 h. The newly designed pulsatile capsule device could be used for targeting 5-FU to the colon. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Three proteins involved in Caenorhabditis elegans vulval invagination are similar to components of a glycosylation pathway

We have molecularly analyzed three genes, sqv-3, sqv-7, and sqv-8, that are required for wild-type vulval invagination in Caenorhabditis elegans. The predicted SQV-8 protein is similar in sequence to two mammalian beta(1,3)-glucuronyltransferases, one of which adds glucuronic acid to protein-linked galactose-beta(1, 4)-N-acetylglucosamine. SQV-3 is similar to a family of glycosyltransferases that includes vertebrate beta(1, 4)-galactosyltransferases, which create galactose-beta(1, 4)-N-acetylglucosamine linkages. One model is therefore that SQV-8 uses a SQV-3 product as a substrate. SQV-7 is similar to members of a family of nucleotide-sugar transporters. The sqv genes therefore are likely to encode components of a conserved glycosylation pathway that assembles a C. elegans carbohydrate moiety, the absence of which perturbs vulval invagination.     

Light-dependent changes in outer segment free-Ca2+ concentration in salamander cone photoreceptors

Simultaneous measurements of photocurrent and outer segment Ca2+ were made from isolated salamander cone photoreceptors. While recording the photocurrent from the inner segment, which was drawn into a suction pipette, a laser spot confocal technique was employed to evoke fluorescence from the outer segment of a cone loaded with the Ca2+ indicator fluo-3. When a dark-adapted cone was exposed to the intense illumination of the laser, the circulating current was completely suppressed and fluo-3 fluorescence rapidly declined. In the more numerous red-sensitive cones this light-induced decay in fluo-3 fluorescence was best fitted as the sum of two decaying exponentials with time constants of 43 +/- 2.4 and 640 +/- 55 ms (mean +/- SEM, n = 25) and unequal amplitudes: the faster component was 1.7-fold larger than the slower. In blue-sensitive cones, the decay in fluorescence was slower, with time constants of 140 +/- 30 and 1,400 +/- 300 ms, and nearly equal amplitudes. Calibration of fluo-3 fluorescence in situ from red-sensitive cones allowed the calculation of the free-Ca2+ concentration, yielding values of 410 +/- 37 nM in the dark-adapted outer segment and 5.5 +/- 2.4 nM after saturating illumination (mean +/- SEM, n = 8). Photopigment bleaching by the laser resulted in a considerable reduction in light sensitivity and a maintained decrease in outer segment Ca2+ concentration. When the photopigment was regenerated by applying exogenous 11-cis-retinal, both the light sensitivity and fluo-3 fluorescence recovered rapidly to near dark-adapted levels. Regeneration of the photopigment allowed repeated measurements of fluo-3 fluorescence to be made from a single red-sensitive cone during adaptation to steady light over a range of intensities. These measurements demonstrated that the outer segment Ca2+ concentration declines in a graded manner during adaptation to background light, varying linearly with the magnitude of the circulating current.     

Tailoring magnetic and dielectric properties of rubber ferrite composites containing mixed ferrites

Rubber ferrite composites containing various mixed ferrites were prepared for different compositions and various loadings. The magnetic and dielectric properties of the fillers as well as the ferrite filled matrixes were evaluated separately. The results are correlated. Simple equations are proposed to predetermine the magnetic and dielectric properties. The validity of these equations is verified and they are found to be in good agreement. These equations are useful in tailoring the magnetic and dielectric properties of these composites with predetermined properties.     

Subcarrier allocation and bit loading algorithms for OFDMA-based wireless networks

Orthogonal Frequency Division Multiple Access (OFDMA) is an emerging multiple access technology. In this paper, we consider OFDMA in the context of fixed wireless networks. This paper addresses the problem of assigning subcarriers and bits to point-to-point wireless links in the presence of cochannel interference and Rayleigh fading. The objective is to minimize the total transmitted power over the entire network while satisfying the data rate requirement of each link. We formulate this problem as a constrained optimization problem and present centralized algorithms. The simulation results show that our approach results in an efficient assignment of subcarriers and transmitter power levels in terms of the energy required for transmitting each bit of information. However, centralized algorithms require knowledge of the entire network topology and channel characteristics of every link. In a practical scenario, that would not be the situation and there is a need for distributed rate allocation algorithms. To address this need, we also present a distributed algorithm for allocating subcarriers and bits in order to satisfy the rate requirements of the links.