Structural and residual stress changes in Mo/a-Si multilayer thin films with annealing

The thermal and mechanical stability of molybdenum and amorphous silicon (Mo/a-Si) optical multilayers (3 and 4 nm nominal thickness of Mo and Si) at 316 °C were studied by annealing experiments. Growth of amorphous Mo-Si interlayers with a stoichiometry of 12 was observed at the Mo/a-Si interfaces. In addition, residual stresses significantly changed in the crystalline Mo and amorphous Si layers with annealing. High resolution electron microscopy, selected area electron diffraction, and X-ray diffraction of the crystalline Mo revealed that tensile stresses increased from 2 to about 10 GPa in the lateral direction (parallel to the interface plane). The compressive strains that developed in the vertical direction (perpendicular to the interface plane) are consistent with Poisson's ratio. Laser deflectometer measurements of thicker (0.1 m) amorphous silicon layers may indicate compressive-stress relaxation in the amorphous silicon with annealing, consistent with other investigations. Overall, the residual stress in a 40-bilayer film changes from about –0.5 to about +1.5 GPa. Structural transformation after relatively short annealing times at the interfaces in the thin amorphous Mo-Si interlayers may rationalize increased tensile strains in the Mo layers.     

Properties of whole saliva and dental plaque in relation to 40-month consumption of chewing gums containing xylitol, sorbitol of sucrose

The concern with nursing research in the future work of nurse graduates. Expectations from the viewpoint of the nurse researcher. Keeping in mind the concerns which occupy nurse researchers now and in the future, expectations are raised of the graduates of degree programmes in nursing science which are now also being established in the Federal Republic of Germany. This takes into account the structurally determined areas of self determined action in new fields of professional practice. Nurse graduates will be seen as "change agents" in their future areas of work and will have three essential aspects of involvement with nursing research: 1. they themselves will conduct research 2. they will receive, put into practice and transmit results of nursing research 3. they will initiate and commission nursing research projects. According to the broad topics of nursing research, requirements for nurses to act as professionals in their new working fields are formulated referring to the given structural conditions in Germany.     

A test of the fail-safe N for self-help programs.

A meta-analysis of published studies on the clinical efficacy of selected self-help programs (F. Scogin et al; see record 1990-15222-001) indicated that such conditions were more effective than no-treatment controls. Calculation of a fail-safe N showed that 53 nonsignificant studies would have to exist to render the conclusions of the meta-analysis invalid. Results indicate that unpublished research is unlikely to threaten the validity of the original meta-analysis. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

同行导师体验报告(英文)

Students at the University of Derby are required to complete a year in industry as part of their Bachelor of Science degrees.This is a daunting prospect for some of them,and they can be reluctant to engage in the process of finding a placement position.As part of a second year module,students seeking placement are paired with students already on placement in a mentee/mentor relationship to support the second year students in their search for an internship.This arrangement helps the mentees by introducing them to potential role models close to their experience,receiving encouragement from peers and the inculcation of belief that it is possible to find a placement.The mentors also benefit from a recognition of how much they have learnt.However,there are difficulties in establishing and managing the scheme which should be recognised.This paper reports our experience over the last three years.     

On the efficiency of bootstrap method into the analysis contingency table

The bootstrap method is a computer intensive statistical method that is widely used in performing nonparametric inference. Categorical data analysis, in particular the analysis of contingency tables, is commonly used in applied field. This work considers nonparametric bootstrap tests for the analysis of contingency tables. There are only a few research papers which exploit this field. The p-values of tests in contingency tables are discrete and should be uniformly distributed under the null hypothesis. The results of this article show that corresponding bootstrap versions work better than the standard tests. Properties of the proposed tests are illustrated and discussed using Monte Carlo simulations. This article concludes with an analytical example that examines the performance of the proposed tests and the confidence interval of the association coefficient.     

On Delivery Times in Packet Networks under Adversarial Traffic

We consider packet networks and make use of the "adversarial queuing theory" model [10]. We are interested in the question of guaranteeing that all packets are actually delivered to destination, and of having an upper bound on the delivery times of all packets. Whether this is possible against all adversarial queuing theory rate-1 adversaries was previously posed as an open question [13],[10]. Among other things, we give a queuing policy that guarantees bounded delivery time whenever the rate-1 adversary injects a sequence of packets for which there exists a schedule with a finite upper bound on the delivery times of all packets, and adheres to certain additional conditions. On the negative side we show that there exist rate-1 sequences of packets for which there is no schedule with a finite upper bound on the delivery times of all packets. We thus answer an open question posed by Gamarnik [13]. We further show that delivering all packets while maintaining stability (we coin the term "reliability" for this property) can be done by an offline scheduler whenever the injection of packets is done at rate of at most 1. However, on the other hand, we also show that there is no online protocol (even centralized) that can achieve that property against all rate-1 adversaries. We thus answer an open question of Borodin et al. [10].     

Cognitive Ability, Expertise, and Age Differences in Following Air-Traffic Control Instructions.

Differences in cognitive ability and domain-specific expertise may help explain age differences in pilot performance. Pilots heard air-traffic controller messages and then executed them while "flying" in a simulator. Messages varied in length and speech rate. Age was associated with lower accuracy, but the expected Age x Message Difficulty interactions were not obtained. Expertise, as indexed by pilot ratings, was associated with higher accuracy; yet expertise did not reduce age differences in accuracy. The effect of age on communication task accuracy was largely explainable as an age-associated decrease in working memory span, which in turn was explainable as decreases in both speed and interference control. Results are discussed within frameworks of deliberate practice and cognitive mediation of age differences. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

分布式实时电力监控系统的设计

提出了一种分布式实时电力监控系统的设计思路，结合电力行业的行业特色和行业要求，设计了系统的组成，分析了系统中使用的关键技术，阐述了在系统中的实现思路。     

A method for reverse engineering of material microstructure for heterogeneous CAD

Integration of material composition, microstructure, and mechanical properties with geometry information enables design and analysis of materials and products in a computer-aided design (CAD) environment. In this paper, we propose a method for the construction of material models from microstructure images, that can be integrated into a heterogeneous CAD representation. The method utilizes Radon and wavelet transforms to compute a surfacelet representation. A novel feature recognition method was developed to identify microstructure features, including embedded fibers and grain boundaries, from the surfacelet representation. The models and methods were demonstrated with examples of synthetic and engineered polymer nanocomposites, a metal alloy, and a medical dataset of human feet.     

Design of a cost-effective on-grid hybrid wind–hydrogen based CHP system using a modified heuristic approach

An economic model and optimization procedure is developed in this paper for grid-connected hybrid wind–hydrogen combined heat and power systems for residential applications in northeastern Iran. The model considers various significant factors: energy production cost, electrical trade with local grid, electrical power generation from the wind/hydrogen energy system, thermal recovery from the fuel cell, and maintenance. Also, various tariffs for purchasing and selling electrical energy from the local grid are considered for the hybrid system operation. The optimization objective is to minimize the system total cost subject to relevant constraints for residential applications. To achieve this aim, an efficient optimization method is proposed based on particle swarm optimization. The proposed algorithm performance is compared with that for the imperialist competition algorithm. The results show that the hybrid system is the most cost-effective for the residential load, and the results of the proposed algorithm are more promising than those for the alternative algorithm.