Cation interdiffusion between thick film of YBa2Cu3O7-δ and ceramic substrate

Thick films of superconducting oxides, YBa₂Cu₃O_7-, were successfully made by conventional screen-printing technology on Al₂O₃, MgO, and ZrO₂ substrates. Interdiffusion between the superconductive film and substrate was investigated using analytical electron microscopy. The results indicate that MgO and ZrO₂ are superior to Al₂O₃ for substrate materials.     

Solvent effect on ageing of silica gels

The structure of silica gels derived from tetraethoxysilane (TEOS) with molar compositions of TEOSH₂OHNO₃=1100.4 and then aged in various solvents, was studied. The effect of various solvents having different physical properties on the gel structure, as well as the relationship between the solvent properties and the dried gel structure, were investigated. The density, surface area and pore-size distribution were measured. The results of the pore structure and SEM showed the aged gels to have a slit-shaped micropore, narrow pore-size distribution, and homogeneous microstructure. The density, surface area, pore size and pore volume of dried gels changed as the gels were subjected to ageing in various solvents. The surface area could be related to the polarity parameter of the ageing solvent.     

Process simulation and fabrication of advanced multi-step three-dimensional braided preforms

The fundamentals of multi-step braiding for the fabrication of three-dimensional fibre preforms for composites have been studied. To facilitate the understanding of the complex multi-step braiding processes, a computer simulation algorithm has been developed. The simulation acts as a tool to allow the identification of individual yarn paths, number and location of yarn groups, and braid geometry. It was found that individual control of the rows and columns of yarn carriers on a Cartesian braiding bed allows for the fabrication of advanced multi-step braids; the micro-structural possibilities of three-dimensional braids are thus greatly extended. Some basic relationships of the braiding parameters have been identified. It has been concluded that the traditional four-step and two-step braidings are special cases of multi-step braidings. To verify the feasibility of the structures, experimental investigations have also been carried out. Innovative braid architectures have been designed and fabricated using a prototype multi-step braiding machine.     

Novel,liquid crystal formula to overcome LTPS LCD image sticking without adjustment of gamma code,optical, VHR and IS evaluation

In this article, novel n-FFS liquid crystal material from Slichem was used in order to elevate the anti-backlight long aging effect; a trace amount of free radical trap HALS-like additive was added, the principle of which can be expressed via Denisov cycle, confirmed by measuring the temporal VHR changes in test cells; three different resolution (FHD ~ QHD) models paired with N19 and N21 were selected for testing by comparing the actual panel. It is verified that the optimized material greatly improves the image sticking performance of the panel and keeping optical performance.     

Design of fault-tolerant large-scale VOD servers: With emphasis onhigh-performance and low-cost

Recent technological advances in digital signal processing, data compression techniques, and high-speed communication networks have made Video-on-Demand (VOD) servers feasible. A challenging task in such systems is servicing multiple clients simultaneously while satisfying real-time requirements of continuous delivery of objects at specified rates. To accomplish these tasks and realize economies of scale associated with servicing a large user population, a VOD server requires a large disk subsystem. Although a single disk is fairly reliable, a large disk farm can have an unacceptably high probability of disk failure. Furthermore, due to real-time constraints, the reliability requirements of VOD systems are even more stringent than those of traditional information systems. Traditional RAID solutions are inadequate due to poor resource usage. Thus, in this paper, we present alternative schemes which provide a high degree of reliability at low disk storage, bandwidth, and memory costs for on-demand multimedia servers. Moreover, we discuss some of the main issues and trade-offs associated with providing fault tolerance in multidisk VOD systems. We would like to impress upon the reader that one of the main points of this paper is the exposition of trade-offs and issues associated with designing fault-tolerant VOD servers. It is not the case that one fault tolerance scheme is absolutely better than another, but rather that one must understand the trade-offs as well as one's system constraints and then choose a fault tolerance scheme accordingly     

Grain boundary effect on electron-beam-induced current in La3Ga5.5Ta0.5O14 crystal

La₃Ga_5.5Ta_0.5O₁₄ crystal recently attracted more attention due to its superior electromechanical properties and high Q × f product. We report that the first electron-beam-induced current experiment on La₃Ga_5.5Ta_0.5O₁₄ single crystal. This method is employed to study the effect of the crystal's grain boundary on the incident electron beam. The experimental results clearly show that when the electron beam scans over the grain boundary of the crystal, a fraction of the carriers recombine at the grain boundary and is unavailable for the current generation. This recombination rate will be enhanced when the electron beam was close to the boundary and cause a dip in the collected current. Although the crystal is an insulator, this effect still can be observed if the coating metal is proper to be chosen. It is also pointed out that the different diffusion lengths of the crystal might be due to the tilted grain boundary.     

Optimal common-mode voltage reduction PWM technique for inverter control with consideration of the dead-time effects-part II: applications to IM drives with diode front end

The main theme of this paper is to demonstrate the applications of the newly developed common-mode voltage reduction pulsewidth-modulation (PWM) technique, which restricts the common-mode voltage to one-third of DC-link voltage, to vector-controlled induction motor drives. As compared to previous common-mode voltage reduction techniques, the presented technique can be applied to the inverter with diode front end and has no adverse effect on the linear modulation range. Therefore, vector-controlled drives using the developed technique for inverter control have a wide speed range. Moreover, the effects of the common-mode voltage reduction PWM technique on speed response for vector-controlled induction motor drives will be fully investigated in this paper. It will be demonstrated by intensive experimental results that speed performance does not deteriorate significantly within the rated speed range.     

Influence of Conductivity of Slag on Decarburization Reaction

By altering the electrochemical properties of slag, the decarburization reaction of Fe3+-based slag withFe-C droplet was studied. The results showed that a lot of free electrons and holes exist in the slag containing transition metal oxides (such as TiO2 and Fe2O3). So electronic conduction in the slag increases. Finally, it led to the increment of the decarburization reaction rate between slag and Fe-C droplet, and mass fraction of carbon remaining indroplet decreases to a lower level.     

Secure centralized spectrum sensing for cognitive radio networks

Spectrum utilization becomes more and more important while new communication techniques keep increasing and the spectrum bands remain finite. Cognitive radio is a revolutionary technology to make use of the spectrum more effectively. In order to avoid the interference to the primary user, spectrum sensing must be sensitive and reliable. Cooperative spectrum sensing (CSS) is one of the ways to increase the reliability of spectrum sensing. The information fusion technique is a key component of CSS. In this paper, we proposed a novel fusion scheme based on spatial correlation technique. We utilize geographical information with reputational weights to propose a two-level fusion scheme called secure centralized spectrum sensing (SCSS). The simulation results show that as the attackers present high density aggregation at some areas, the correct sensing ratio of SCSS is increasing as well even when the number of attackers is very large.     

High Output Saturation and High-Linearity Uni-Traveling-Carrier Waveguide Photodiodes

Waveguide uni-traveling-carrier photodiodes (UTC-PDs) have been fabricated and tested. Output saturation currents greater than 40 mA at 1 GHz are demonstrated for a 10 mumtimes150mum photodiode (PD). The third-order intermodulation distortion is also measured and exhibits a third-order output intercept point of 43 dBm at 20 mA and 34 dBm at 40 mA for this same PD. UTC-PDs with geometries of 5 mumtimes100 mum and 10 mumtimes100 mum are also compared and it is shown that a wider waveguide PD has improved saturation characteristics due to the lower optical power density which reduces the saturation at the front end of the device