Translational lemmas for DLOGTIME-uniform circuits,alternating TMs,and PRAMs

We present translational lemmas for the three standard models of parallel computation, and apply them to obtain tight hierarchy results. It is shown that, for arbitrarily small rational constant , (i) there is a language which can be accepted by a -uniform circuit family of depth and size but not by any -uniform circuit family of depth and size , (ii) there is a language which can be accepted by a -time -space ATM with l worktapes but not by any -time -space ATM with the same l worktapes if the number of tape symbols is fixed, and (iii) there is a language which can be accepted by a -time PRAM with processors but not by any -time PRAM with processors. Here, c > 0, d ≥ 1, r ₁ > 1, and r ₂ ≥ 1 are arbitrary rational constants, and l ≥ 2 is an arbitrary integer. Preliminary versions of different parts of this paper appeared in Proc. MCU 2004 (LNCS 3354) and Proc. FCT 2005 (LNCS 3623).     

Development of clinical indicators for performance measurement and improvement: an HMO/purchaser collaborative effort

This article describes a collaborative effort between a major health care purchaser, three area health maintenance organizations, and a state Medicaid agency to develop clinical indicators as the basis for a comparison database. Some of the difficulties in developing a "common yardstick" of quality and value are candidly discussed.     

Collection and transfusion of blood and blood components in the United States, 1989

A poor response to L-DOPA in addition to parkinsonian, cerebellar, and autonomic signs is commonly regarded as indicative of clinical multiple system atrophy (MSA). We compared the motor response to a single oral administration of 250 mg L-DOPA/25 mg carbidopa in eight MSA patients and eight Parkinson's disease (PD) patients with the "on-off" phenomenon, evaluating L-DOPA peripheral pharmacokinetics. Motor response was consistently good in all PD patients, but only four MSA patients had a (moderate) response. Pharmacokinetic parameters did not differ between the groups. The varying extent of putaminal damage could be responsible for the differing motor response to L-DOPA in MSA patients.     

Localized eosinophilic granuloma (Langerhans' cell histiocytosis) of the orbital frontal bone

Four patients (aged 5, 8, 14, and 51 years at initial manifestation) with isolated eosinophilic granulomas of the orbital frontal bone displayed short symptomatic periods (two weeks to three months) and some combination of erythema of the lids, a soft, palpable anterior orbital mass, periorbital pain, and osteolytic bone lesions on roentgenography. The bone lesions roentgenographically exhibited irregular, serrated, and sclerotic margins, distinguishing them from the more oval appearance of dermoid cysts. Electron microscopy performed in one case disclosed the presence of Langerhans' granules in the cytoplasm of the histiocytes, indicating that the orbital disease is a mild form of "histiocytosis X" and a benign proliferation of a specific kind of histiocyte--the Langerhans' cell. On follow-up (two to 20 years), after incomplete curettage of two lesions coupled with low doses of postoperative radiotherapy, there was reconstitution of the bone defects, whereas more extensive surgery performed on the other two patients resulted in permanent but subclinical bone defects.     

Characterization of a temperature-sensitive, hexon transport mutant of type 5 adenovirus

Infection of KB cells at 39.5 degrees C with H5ts147, a temperature-sensitive (ts) mutant of type 5 adenovirus, resulted in the cytoplasmic accumulation of hexon antigen; all other virion proteins measured, however, were normally transported into the nucleus. Immunofluorescence techniques were used to study the intracellular location of viral proteins. Genetic studies revealed that H5ts147 was the single member of a nonoverlapping complementation group and occupied a unique locus on the adenovirus genetic map, distinct from mutants that failed to produce immunologically reactive hexons at 39.5 degrees C ("hexon-minus" mutants). Sedimentation studies of extracts of H5ts147-infected cells cultured and labeled at 39.5 degrees C revealed the production of 12S hexon capsomers (the native, trimeric structures), which were immunoprecipitable to the same extent as hexons synthesized in wild type (WT)-infected cells. In contrast, only 3.4S polypeptide chains were found in extracts of cells infected with the class of mutants unable to produce immunologically reactive hexon protein at 39.5 degrees C. Hexons synthesized in H5ts147-infected cells at 39.5 degrees C were capable of being assembled into virions, to the same extent as hexons synthesized in WT-infected cells, when the temperature was shifted down to the permissive temperature, 32 degrees C. Infectious virus production was initiated within 2 to 6 h after shift-down to 32 degrees C; de novo protein synthesis was required to allow this increase in viral titer. If ts147-infected cells were shifted up to 39.5 degrees C late in the viral multiplication cycle, viral production was arrested within 1 to 2 h. The kinetics of shutoff was similar to that of a WT-infected culture treated with cycloheximide at the time of shift-up. The P-VI nonvirion polypeptide, the precursor to virion protein VI, was unstable at 39.5 degrees C, whereas the hexon polypeptide was not degraded during the chase. It appears that there is a structural requirement for the transport of hexons into the nucleus more stringent than the acquisition of immunological reactivity and folding into the 12S form.     

Stress distribution of coated film with a range of coated film thickness and elastic properties under a single EHL operating condition

In recent years, the techniques improving sliding performances have progressed by using coated films possessing superior tribological properties, to reduce the failures of the mechanical elements. Those techniques are often used under severe conditions such as elastohydrodynamic lubrication (EHL). In this paper, numerical three-dimensional analysis of the maximum shear stress applied into the coated film and substrate under a single EHL operating condition was performed with a range of coated film thickness and elastic properties. The strength of coated film as one of those techniques was evaluated numerically, resulting in an optimum design of coated film. As a result, coated films with a larger value of thickness and a smaller modulus of elasticity than that of substrate are preferable.     

Electrostatic properties of ultra-thin polyimide Langmuir-Blodgettfilms biased in a needle-plane electrode system

Surface potentials of polyimide (PI) Langmuir-Blodgett (LB) films on metal (Al, Ag and Au) electrodes, charged at various voltages, were examined under a needle-plane electrode system. It was found that PI LB films were negatively charged when the biasing voltage applied to the needle-electrode increased. The surface potentials saturated when the number of deposited layers was 20 to 30, and they were dependent on the nature of the metal electrodes. The temperature dependence of the surface potential also was examined, and it was concluded that the tendency to accept electrons increases as the temperature increases. These results suggest that the presence of interfacial electrostatic space charges in as-deposited PI LB films at the metal/film interface made a significant contribution to the creation of the additional electrostatic potential when the films were biased under a needle-plane electrode system     

Surface and pore structure of alumina derived from xerogel/aerogel

The alkyl derivatives of boehmite were prepared by solvothermal reaction of aluminum isopropoxide in n-alcohols (ethanol, 1-butanol, 1-hexanol, 1-octanol and 1-dodecanol) and the products were recovered as aerogel/xerogel by the removal of the solvent at the end of reaction. Aerogel or xerogel can be obtained simply by using only a reaction vessel (autoclave) and the obtained products were composed of plate-like particles having a well-developed boehmite structure. The alumina powders obtained by calcination of these products had relatively large pore-volumes ranging from 1.35 to 2.56 cm³/g. Transformation into α-Al₂O₃ was retarded even after calcination at 1200 °C. The effect of n-alcohols used in the solvothermal reaction on the phase, morphology and pore-texture of the alumina samples are discussed.     

Zirconium mesostructures immobilized in calcium alginate for phosphate removal

Eutrophication caused by the excessive supply of phosphate to water bodies has been considered as one of the most important environmental problems. In this study, the powder of zirconium mesostructure (ZM), which was prepared with the template of surfactant, was immobilized in calcium alginate for practical application and the resulting material was tested to evaluate the phosphate removal efficiency. Sorption isotherms and kinetic parameters were obtained by using the entrapped ZM beads with 30 to 60% of ZM. The maximum sorption capacity increased with the higher ZM content. Q _max in Langmuir isotherm was 51.74 mg/g for 60% of ZM with 7 mm of size. The smaller the particle size of the ZM beads, the faster the rate of phosphate removal, because the phosphate ions had less distance to reach the internal pores of the immobilized ZM beads. Chemical and electrochemical regeneration techniques were compared. Phosphates adsorbed on the ZM beads were effectively desorbed with NaCl, NaOH, and Na₂SO₄ solutions. An electrochemical regeneration system consisting of an anion exchange membrane between two platinum-coated titanium electrodes was successfully used to desorb and regenerate the phosphate-saturated ZM beads. Complete regeneration was reached under optimal experimental conditions. Chemical and electrochemical regeneration proved the reusability of the bead form of the entrapped ZM, and will enhance the economical performance of the phosphate treatment process.