Dietary CLA and DHA modify skin properties in mice

This study investigated the influence of PUFA on the properties of mouse skin. Mice (3 wk old) were given free access to oils high in linoleic acid, CLA, or DHA for 4 wk. At the end of the experiment, their skins were compared by both biochemical and histological methods. No significant differences in lipid and collagen contents were detected among treatments, although the FA composition in the skin was altered depending upon the FA composition of the supplemented oils. Electron microscopy revealed that the subcutaneous tissue layers in the CLA and DHA groups were significantly thinner than that in the high linoleic acid group, whereas no differences in the thickness of dermis layers were observed among the three groups. These results suggest that skin properties in mice are readily modified by dietary FA sources within 4 wk of dietary oil supplementation.     

Liquefaction of subbituminous coals under apparently non-hydrogenative conditions

Reactivities of several coals of different ranks have been examined in degrading extractions with aromatic solvents under apparently non-hydrogenative reaction conditions. Pyrene and A240 pitch liquefied the fusible coals in high yields and the slightly-fusible coals in moderate yields, indicating the importance of fusibility in such liquefaction processes. A240-LS pitch is a powerful solvent for slightly-fusible coals. Considerable amounts of pyridine- or THF-soluble fractions were produced especially with A240-LS pitch. A240 pitch is a better solvent than pyrene for some slightly-fusible coals. However, the extent of depolymerization of liquefied coal, pyridine- or THF-solubility, was definitely inferior. Yields of such fractions are higher for lower-rank coals. The mechanism of coal liquefaction under apparently non-hydrogenative conditions is discussed with emphasis on the stabilization of thermal fragments derived from the coal.     

Space charge field effect on light emitting from tetracene field-effect transistor under AC electric field

By applying square wave AC voltage to the Au source electrode of tetracene based field-effect transistor (FET), electroluminescence (EL) was obtained. The results suggest that electrons and holes were injected alternately from the source electrode and recombined each other, and lead to the EL. This type of EL was localized at the interface between the source electrode and tetracene, and enhanced periodically with two relaxation times in accordance with the applied AC voltage cycle. We modeled the carrier behavior in the FET and explained the decay of EL, taking into account the space charge field contribution. Finally, using an AC voltage superposed on DC bias voltage, it was shown that electron injection was prompted only by space charge field.     

Fabrication and characterization of polyterpenol as an insulating layer and incorporated organic field effect transistor

A non-synthetic polymer material, polyterpenol, was fabricated using a dry polymerization process namely RF plasma polymerization from an environmentally friendly monomer and its surface, optical and electrical properties investigated. Polyterpenol films were found to be transparent over the visible wavelength range, with a smooth surface with an average roughness of less than 0.4 nm and hardness of 0.4 GPa. The dielectric constant of 3.4 for polyterpenol was higher than that of the conventional polymer materials used in the organic electronic devices. The non-synthetic polymer material was then implemented as a surface modification of the gate insulator in field effect transistor (OFET) and the properties of the device were examined. In comparison to the similar device without the polymer insulating layer, the polyterpenol based OFET device showed significant improvements. The addition of the polyterpenol interlayer in the OFET shifted the threshold voltage significantly; + 20 V to −3 V. The presence of trapped charge was not observed in the polyterpenol interlayer. This assisted in the improvement of effective mobility from 0.012 to 0.021 cm²/Vs. The switching property of the polyterpenol based OFET was also improved; 10⁷ compared to 10⁴. The results showed that the non-synthetic polyterpenol polymer film is a promising candidate of insulators in electronic devices.     

Self-flux synthesis and photoluminescent properties of LiAl5O8

Pure-phase LiAl₅O₈ was selected as an oxide ceramic red phosphor material without dopants (color centers) and was synthesized using a self-flux method. The LiAl₅O₈ was formed by heating a powder mixture consisting of γ-Al₂O₃:Li₂SO₄ = 1:2 (molar ratio) at over 1100 °C for 1 h. Photoluminescence (PL) properties for the synthesized LiAl₅O₈ were investigated. The maximum intensity of the excitation spectrum for the photoluminescent emission of LiAl₅O₈ synthesized was at 274 nm. The peak intensity of the emission spectrum was at a wavelength of 667 nm (red color). The intensity of the peak emission spectrum increased with the heating temperature, i.e., the maximum peak intensity of the red emission spectrum was detected for the LiAl₅O₈ synthesized by heating at 1500 °C for 1 h.     

REFLICS: Real-time flow imaging and classification system

An accurate analysis of a large dynamic system like our oceans requires spatially fine and temporally matched data collection methods. Current methods to estimate fish stock size from pelagic (marine) fish egg abundance by using ships to take point samples of fish eggs have large margins of error due to spatial and temporal undersampling. The real-time flow imaging and classification system (REFLICS) enhances fish egg sampling by obtaining continuous, accurate information on fish egg abundance as the ship cruises along in the area of interest. REFLICS images the dynamic flow with a progressive-scan area camera (60 frames/s) and a synchronized strobe in backlighting configuration. Digitization and processing occur on a dual-processor Pentium II PC and a pipeline-based image-processing board. REFLICS uses a segmentation algorithm to locate fish-egg-like objects in the image and then a classifier to determine fish egg, species, and development stage (age). We present an integrated system design of REFLICS and performance results. REFLICS can perform in real time (60 Hz), classify fish eggs with low false negative rates on real data collected from a cruise, and work in harsh conditions aboard ships at sea. REFLICS enables cost-effective, real-time assessment of pelagic fish eggs for research and management. Received: 12 April 2000 / Accepted: 6 July 2000     

TEM Observations of the Initial Oxidation Stages of Nb-Ion-Implanted TiAl

Coupon specimens of TiAl were implanted with Nb ions at an acceleration voltage of 50 kV with a dose of 10²¹ ions m.^–2 They were then slightly oxidized during heating to 900 or 1200 K, or at 1200 K for 3.6 ksec (1 hr) in a flow of purified oxygen under atmospheric pressure. The implanted specimens and oxidized specimens were characterized and observed by AES, X-ray diffractometry, SEM, TEM, EDS, and EPMA. Implantation improves the oxidation resistance significantly by forming virtually -Al₂O₃ scales. The implanted layer is about 75 nm thick; the outer part of 30-nm thickness is -Ti phase and the rest of 45-nm thickness is amorphous. Heating to 900 K in O₂ results in partial crystallization of the amorphous layer to Ti₅Al₃O₂ (Z-phase) and to 1200 K results in oxide scales of 270 to 400 nm thickness consisting mainly of Al₂O₃. The fraction of Al₂O₃ in the scale increases toward the substrate. Oxidation at 1200 K for 3.6 ksec results in Al₂O₃-rich scales of about 400-nm thickness. The oxide grain size is very fine, about 80 nm in size, and becomes smaller toward the outer scale surface. This implies that implantation enhanced the nucleation of Al₂O₃ grains relative to the growth of TiO₂ grains. This finding and the formation of -Ti phase are thought to be responsible for the excellent oxidation resistance obtained.     

Characterization of white matter damage in ischemic leukoaraiosis with diffusion tensor MRI

BACKGROUND AND PURPOSE: Information on the neuropathological changes underlying ischemic leukoaraiosis is only available postmortem, and there are limited data on histological appearances early in the disease. Diffusion tensor imaging allows determination of the directionality of diffusion, which is greater in the direction of white matter bundles. Therefore, the technique might be expected to show loss of anisotropy (directional diffusion) in leukoaraiosis. METHODS: Nine patients with ischemic leukoaraiosis (radiological leukoaraiosis and clinical lacunar stroke) and 10 age-matched controls were studied. Diffusion tensor imaging was performed, and maps of diffusion trace and fractional anisotropy were constructed. Mean values of trace and fractional anisotropy were determined in standard regions of the anterior and posterior white matter in both hemispheres. RESULTS: In all patients with ischemic leukoaraiosis, a characteristic abnormal pattern was found, with loss of anisotropy and increased trace in the white matter. For example, in the right anterior white matter mean (SD) trace/3 was 1.12 (0.33) x10(-3) mm2 s-1 in patients and 0.75 (0.11) in controls (P=0.001). In the same region, fractional anisotropy was 0.53 (0.11) in patients and 0.78 (0.09) in controls (P<0.001). Within the white matter regions, there was a strong negative correlation between mean diffusivity and anisotropy (r=-0.92, P<0.0001). CONCLUSIONS: The characteristic pattern found on diffusion tensor imaging in this patient group is consistent with axonal loss and gliosis leading to impairment to and loss of directional diffusion. The "in vivo histological" information obtained may be useful in monitoring disease progression and in investigating the pathogenesis of the cognitive impairment that may be present.     

Germ-line mutations in the neurofibromatosis 2 gene: correlations with disease severity and retinal abnormalities

Neurofibromatosis 2 (NF2) features bilateral vestibular schwannomas, other benign neural tumors, and cataracts. Patients in some families develop many tumors at an early age and have rapid clinical progression, whereas in other families, patients may not have symptoms until much later and vestibular schwannomas may be the only tumors. The NF2 gene has been cloned from chromosome 22q; most identified germ-line mutations result in a truncated protein and severe NF2. To look for additional mutations and clinical correlations, we used SSCP analysis to screen DNA from 32 unrelated patients. We identified 20 different mutations in 21 patients (66%): 10 nonsense mutations, 2 frameshifts, 7 splice-site mutations, and 1 large in-frame deletion. Clinical information on 47 patients from the 21 families included ages at onset and at diagnosis, numbers of meningiomas, spinal and skin tumors, and presence of cataracts and retinal abnormalities. We compared clinical findings in patients with nonsense or frameshift mutations to those with splice-site mutations. When each patient was considered as an independent random event, the two groups differed (P < or = .05) for nearly every variable. Patients with nonsense or frameshift mutations were younger at onset and at diagnosis and had a higher frequency and mean number of tumors, supporting the correlation between nonsense and frameshift mutations and severe NF2. When each family was considered as an independent random event, statistically significant differences between the two groups were observed only for mean ages at onset and at diagnosis. A larger data set is needed to resolve these discrepancies. We observed retinal hamartomas and/or epiretinal membranes in nine patients from five families with four different nonsense mutations. This finding, which may represent a new genotype-phenotype correlation, merits further study.     

Endothelin converting enzyme inhibitor protects development of right ventricular overload and medial thickening of pulmonary arteries in rats with monocrotaline-induced pulmonary hypertension

We evaluated the effects of FR901533, endothelin converting enzyme inhibitor, on development of right ventricular overload and medial thickening of pulmonary arteries in rats with monocrotaline-induced pulmonary hypertension. Pulmonary hypertension was induced by a single injection of monocrotaline (80 mg/kg). Twenty-four hours later (day 1), continuous subcutaneous injection of FR901533 (100 mg/kg/day) was started. Right ventricular systolic pressure, mass ratio of right ventricle to left ventricle, right ventricular wall thickness, right ventricular myocardial fiber diameter, percent medial thickness, and percent smooth muscle area in pulmonary arteries were significantly less in rats that received FR901533 than in the control with monocrotaline on day 28. Both immunoreactivities of endothelin-1 in pulmonary arteries and plasma endothelin-1 levels were observed significantly less in rats treated with FR901533 than in the control with monocrotaline. There were significant increased immunoreactivities of endothelin-B receptor in pulmonary arteries in rats that received FR901533 as compared with those in the control with monocrotaline. FR901533 (100 mg/kg/day), protected the development of right ventricular overload and medial thickening of pulmonary arteries in a rat model of pulmonary hypertension.