Discomfort luminance level of head-mounted displays depending on the adapting luminance

The Images in an immersive head-mounted display (HMD) for virtual reality provide the sole source for visual adaptation. Thus, significant, near-instantaneous increases in luminance while viewing an HMD can result in visual discomfort. Therefore, the current study investigated the luminance change necessary to induce this discomfort. Based on the psychophysical experiment data collected from 10 subjects, a prediction model was derived using four complex images and one neutral image, with four to six levels of average scene luminance. Result showed that maximum area luminance has a significant correlation with the discomfort luminance level than average, median, or maximum pixel luminance. According to the prediction model, the discomfort luminance level of a head-mounted display was represented as a positive linear function in log₁₀ units using the previous adaptation luminance when luminance is calculated as maximum area luminance.     

Epoxy resins toughened with in situ azide–alkyne polymerized polysulfones

To simultaneously improve the fracture toughness and heat resistance of a cured toughened epoxy resin along with a reduction in its viscosity during the mixing process, two novel polysulfone‐type polymers are synthesized via azide–alkyne polymerization for use as toughening agents. The epoxy resin toughened with these polymers by in situ azide–alkyne polymerization during the cure process, which shows excellent processibility and based on the significantly lower viscosity (61 and 62 cP) during epoxy mixing process than that of commonly commercial polyethersulfone (PES, 127,612 cP). The novel polysulfone‐type polymer toughened epoxy resin showed the advantage in excellent fracture toughness than the PES toughened epoxy. In addition, the glass transition temperature of the novel polysulfone‐type polymer toughened epoxy resin is similar to that of the neat one (～230 °C) and does not decrease, which implies excellent heat resistance of the toughened epoxy. These phenomena can be attributed to the formation of semi‐interpenetrating polymer networks comprising the epoxy network and the linear polysulfone‐type polymers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45790.     

Fabrication of a pilot scale module of thin film composite hollow fiber membrane for osmotic pressure‐driven processes

Polyamide thin film composite hollow fiber membranes have advantages in their unique structure compared to flat sheet membranes. This study examined interfacial polymerization methods for fabricating pilot scale hollow fiber membranes (membrane area: 1.2 m², number of hollow fiber strands: 1200). For use in osmotic pressure‐driven processes, a one‐pot hydrophilic interfacial polymerization procedure was developed simultaneously to modify the surface property and synthesize polyamide thin film. With the procedure, a pilot scale module has a water flux of 13 LMH using a draw solution of 0.6M NaCl and a feed solution of distilled water through the design of the module configuration. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46110.     

Photocatalytic degradation of methylene blue and acetaldehyde by TiO<Subscript>2</Subscript>/glaze coated porous red clay tile

Nanosized TiO₂ sol synthesized by sol-gel method was successfully coated on the porous red clay tile (PRC tile) with micrometer sized pores. PRC tile was first coated with a low-firing glaze (glaze-coated PRC tile) and then TiO₂ sol was coated on the glaze layer. A low-fired glaze was prepared at various blending ratios with frit and feldspar, and a blending ratio glazed at 700 °C was selected as an optimum condition. Then TiO₂ sol synthesized from TTIP was dip-coated on the glazed layer (TiO₂/glaze-coated PRC tile), and it was calcined again at 500 °C. Here, these optimum calcination temperatures were selected to derive a strong bonding by a partial sintering between TiO₂ sol particles and glaze layer. Photocatalytic activity on the TiO₂/glaze-coated PRC tile was evaluated by the extent of photocatalytic degradation of methylene blue and acetaldehyde. Methylene blue with the high concentration of 150 mg/l on the surface of TiO₂/glaze-coated PRC tile was almost photodegraded within 5 hours under the condition of average UV intensity of 0.275 mW/cm₂, while no photodegradation reaction of methylene blue occurred on the glaze-coated PRC tile without TiO₂. Another photocatalytic activity was also evaluated by measuring the extent of photocatalytic degradation of gaseous acetaldehyde. The photodegradation efficiency in TiO₂/glaze-coated PRC tile showed about 77% photocatalytic degradation of acetaldehyde from 45,480 mg/l to 10,536 mg/l after the UV irradiation of 14 hours, but only about 16% in the case of the glaze-coated PRC tile.     

Counterweight optimization for reducing dynamic effects of clearance at a revolute joint

An optimal design formulation is developed to reduce undesirable dynamic effects due to clearance at a joint. The objective function to be minimized is the maximum ratio of the rate of change of the joint force direction ( ) to the magnitude of the joint force (R), i.e. max ( ) as calculated from the nominal mechanism without clearances. Design variables are the magnitude and the location of an added mass attached to each link.

Numerical examples for an offset slider crank mechanisms are considered. To check suitability of the objective function, the initial and optimized systems are simulated dynamically by integrating the system model equations and the phenomena of contact loss compared. It is found that although max ( ) is not a function of the magnitude of clearances and not of dimensionless form, it is a reasonable indicator of the contact loss phenomena for the single clearance system considered. The input torques have also been obtained and compared, shown to be more uniform in the optimized system.     

Effect of ion exchange resin on increased surface area crystallization process for purification of vancomycin

We investigated the effects of ion exchange resins on the efficiency of crystallization with an increased surface area for the purification of vancomycin. As surface area-increasing materials, diverse types of ion exchange resin were used to increase the surface area per working volume (S/V). When the S/V was increased, in cation exchange resin Amberlite 200, Amberlite IR 120 (Na), and Amberlite IRC 50 and in anion exchange resin Amberlite IRA 400 (Cl) and Amberlite IRA 910 (Cl), vancomycin crystals were successfully generated. The yield of vancomycin increased (>97%), and the time necessary for crystallization was reduced dramatically (reduced from 24 hr to 12 hr). On the other hand, the purity of the vancomycin was approximately 95% and was not affected by increasing S/V. Use of an ion exchange resin also resulted in the production of smaller vancomycin crystals than in the absence of ion exchange resin.     

���������Ȼ��DZ����������̽����

琼东南盆地是南海北部大陆架新生代北东向伸展盆地,面积约３．４×１０４ｋｍ２,最大沉积厚度１２０００ｍ。盆内存在８个凹陷,依据凹陷的烃源层发育特征、埋藏史、生烃史、生烃强度及资源量综合分析,发现崖南、松南、宝岛、乐东和陵水凹陷均存在高温高压、烃源岩热演化程度高、生气强度大且资源量丰富,因此评价为富气凹陷;油气主要生成于下第三系,８个凹陷中以宝岛,松南凹陷成熟面积最大,两凹陷资源量约占下第三系气资源量的一半以上;松东凹陷因其热演化程度适中,油资源量占较大比例,该凹陷油、气均具有勘探潜力,而崖北及松西凹陷生烃潜力较差。为此,围绕上述富气（烃）凹陷评价并综合天然气的成藏条件,初步筛选琼西基底披覆背斜带、松涛凸起及北东倾没端圈闭带、２号断裂下降盘圈闭带是最具天然气勘探潜力区带,而松东凹陷北坡圈闭带则为油气并举的勘探有利区带。     

Minimalist counting in sensor networks (Noise helps)

We propose a novel algorithm for counting N indistinguishable objects, called targets, by a collection of sensors. We adopt a minimalist scenario where sensors are unaware of the (non-empty) intersections of sensing regions, and so simple addition of all sensor counts inflates estimates of the total number of targets. The multiple counting in intersections must be accounted for, but with nothing more than the sensor counts, this is clearly impossible. However, noise is typically present in the target counting of many, if not most, applications. We make the key observation that if there is a (target-dependent) noise source affecting all sensors simultaneously, then it couples those with non-empty intersections. Exploitation of this coupling allows us to extract multiple-counting statistics from stochastic correlation patterns, and hence to compute accurate estimates of N via the classical inclusion–exclusion formula. Cumulants are the correlation measures of choice. Our analysis brings out and resolves certain technicalities that arise in our statistical counting algorithm. Examples are worked out to show the potential of the new algorithm. The paper concludes with a discussion of alternative models and open problems.     

High‐Performance Piezoelectric,Pyroelectric, and Triboelectric Nanogenerators Based on P(VDF‐TrFE) with Controlled Crystallinity and Dipole Alignment

Poly(vinylidenefluoride‐co‐trifluoroethylene) (P(VDF‐TrFE)), as a ferroelectric polymer, offers great promise for energy harvesting for flexible and wearable applications. Here, this paper shows that the choice of solvent used to dissolve the polymer significantly influences its properties in terms of energy harvesting. Indeed, the P(VDF‐TrFE) prepared using a high dipole moment solvent has higher piezoelectric and pyroelectric coefficients and triboelectric property. Such improvements are the result of higher crystallinity and better dipole alignment of the polymer prepared using a higher dipole moment solvent. Finite element method simulations confirm that the higher dipole moment results in higher piezoelectric, pyroelectric, and triboelectric potential distributions. Furthermore, P(VDF‐TrFE)‐based piezoelectric, pyroelectric, and triboelectric nanogenerators (NGs) experimentally validate that the higher dipole moment solvent significantly enhances the power output performance of the NGs; the improvement is about 24% and 82% in output voltage and current, respectively, for piezoelectric NG; about 40% and 35% in output voltage and current, respectively, for pyroelectric NG; and about 65% and 75% in output voltage and current for triboelectric NG. In brief, the approach of using a high dipole moment solvent is very promising for high output P(VDF‐TrFE)‐based wearable NGs.     

Routing Protocol for Heterogeneous Hierarchical Wireless Multimedia Sensor Networks

Recently, wireless multimedia sensor networks (WMSNs) have emerged as one of the most important technologies, driven by the development of powerful multimedia device such as CMOS. WMSNs require several factors such as resource constraints, specific QoS, high bandwidth and so on. In this paper, we propose a hierarchical heterogeneous network model based routing protocol for WMSNs. In our proposal, proposed network model is classified into monitoring class, delivery class and aggregation class. Also we define two kinds of the routing path in order to ensure bandwidth and QoS. In simulation results, we illustrate the performance of our proposal.