A 1 Gbit synchronous dynamic random access memory with anindependent subarray-controlled scheme and a hierarchical decodingscheme

A prototype 1 Gbit synchronous DRAM with independent subarray-controlled isolation and hierarchical decoding schemes is demonstrated to alleviate the difficulties encountered in high-density devices with regard to failure analysis and performance optimization. The scheme to isolate memory arrays from “hard” defects and to overcome the dc leakages of “soft” defects with external sources allows monitoring of the leakage current for the defect analysis and testing of the device without being limited by the capabilities of on-chip voltage sources. A hierarchical decoding scheme with a dynamic CMOS series logic predecoder achieves improvements in circuit speed, power, and complexity. As a result, evaluation of the prototype devices can be facilitated, and the optimized circuit schemes achieve enhanced circuit performance. A fully working 1 Gbit synchronous DRAM with a chip size of 570 mm² was fabricated using a 0.16 μm CMOS process and tested for excellent functionality up to 143 MHz     

A WDM-PON Employing Fabry–PÉrot Laser Diodes Without a Seed Light Injection

We propose and demonstrate a wavelength-division-multiplexed passive optical network by employing double-contact Fabry-Perot laser diodes (F-P LDs) without a seed light injection. To avoid the high mode partition noise at low frequency, we use a binary phase-shift keying as a modulation format at a low relative intensity noise window. An error-free transmission is achieved by compensating a lasing envelope shift due to temperature variation with the double-contact F-P LD.     

New Syndrome Check Error Estimation and Its Concatenated Coding

A low-complexity and high performance SCEE (Syndrome Check Error Estimation) decoding method for convolutional codes and its concatenated SCEE/RS (Reed–Solomon) coding scheme are proposed. First, we describe the operation of the decoding steps in the proposed algorithm. Then deterministic values on the decoding operation are derived when some combination of predecoder-reencoder is used. Computer simulation results show that the computational complexity of the proposed SCEE decoder is significantly reduced compared to that of conventional Viterbi decoder without degradation of the P_e performance. Also, simulation results of BER performance of the concatenated SCEE/Hard Decision Viterbi (HD-Viterbi) and SCEE/RS (Reed–Solomon) codes are presented.     

Thermally Controlled,Patterned Graphene Transfer Printing for Transparent and Wearable Electronic/Optoelectronic System

Graphene has been highlighted as a platform material in transparent electronics and optoelectronics, including flexible and stretchable ones, due to its unique properties such as optical transparency, mechanical softness, ultrathin thickness, and high carrier mobility. Despite huge research efforts for graphene‐based electronic/optoelectronic devices, there are remaining challenges in terms of their seamless integration, such as the high‐quality contact formation, precise alignment of micrometer‐scale patterns, and control of interfacial‐adhesion/local‐resistance. Here, a thermally controlled transfer printing technique that allows multiple patterned‐graphene transfers at desired locations is presented. Using the thermal‐expansion mismatch between the viscoelastic sacrificial layer and the elastic stamp, a “heating and cooling” process precisely positions patterned graphene layers on various substrates, including graphene prepatterns, hydrophilic surfaces, and superhydrophobic surfaces, with high transfer yields. A detailed theoretical analysis of underlying physics/mechanics of this approach is also described. The proposed transfer printing successfully integrates graphene‐based stretchable sensors, actuators, light‐emitting diodes, and other electronics in one platform, paving the way toward transparent and wearable multifunctional electronic systems.     

Polymer thermosetting organic light-emitting devices

We report a systematic study of novel single- and double-layer thermosetting light-emitting devices (LED's) based on triarytamines for hole transport layer and fluorenes for the emitting and electron transport layer. These devices possess high-thermal stability, high-quantum efficiency, and high-bandgap emission (blue and green). We have fabricated dot matrix displays based on analogs of these materials     

Electrophysicochemical characteristics of a waterpen point coronadischarge

Some interesting electrophysicochemical characteristics of waterpen point-to-plate discharges with DC and AC power have been investigated in a room atmosphere. The metal point electrode of a conventional point-to-plate air gap is severely bombarded by energetic ions from the discharge region near the point. Concurrently, the temperature of the point is greatly increased. There are different characteristics for the waterpen point discharge, because the surface temperature of the waterpen point stays low due to the evaporation of the moisture from the waterpen point. In this paper, the discharges and electrophysicochemical characteristics of a waterpen point and a Pt metal point have been studied to evaluate the differences. It was found that mists and sprays are dispersed from the waterpen point due to the bombardment of ions. Also, a positive corona is effective for mist dispersion, a negative corona disperses sprays, and AC corona disperses both mists and sprays. The AC discharge of the waterpen point generated more ozone of 56 ppm, while it was the negative DC discharge of the Pt point that produced more ozone of 30 ppm. The AC discharge of the waterpen point produced 0.11 ppm at 10 kV, and the Pt point produced 0.10 ppm at 15 kV. The DC discharge of the both points showed no NO formation     

Push-pull quantum series resonant rectifier without start-up inrushcurrent

A new combined buck and boost push-pull quantum series resonant rectifier (PPQSRR) is proposed to achieve a power factor correction without start-up inrush current. With the proposed control method and circuitry, a high power factor and wide range of output voltage without an inrush current can be obtained     

Diffusional interference in liquid phase counter-adsorptions

A surface diffusion mocel with diffusional interference has been presented for the analysis of multicomponent adsorption of phenols by activated carbon. Surface diffusion coefficients for multicomponent adsorptions were estimated from the relationship between. the surface diffusion coefficient of each species and the surface coverage. The diffusional interference coefficients, W_ij, was determined from experimental counter-adsorption data. The numerical values of W_ij were in the range of 0.4–0.9, which show that the introduction of diffusional interference is necessary to analyze multicomponent counter-adsorptions properly. The proposed model successfully simulates the behaviour of phenols-activated carbon system in a batch adsorber.     

A new characterization procedure for aqufous solutions with unknown composition

A new characterization procedure for aqueous solutions with unknown composition was proposed based on the binomial distribution of TOC (total organic carbon) fraction in terms of a characterizing variable, the Freundlich coefficient, k, so that the solution in question can be described by a finite number of pseudo.species identified with a certain k value. The validity and computational accuracy of this procedure has been demonstrated by characterizing three sets of experimental data chosen from different sources. Predictions based on this procedure yielded acceptable results that agreed closely with experimental data.     

Printed compact dual band antenna for 2.4 and 5 GHz ISM band applications

A printed compact dipole antenna for dual ISM band (2.44 and 5 GHz) is presented. The proposed antenna fed by using a 50 /spl Omega/ coaxial line occupies a volume of 15/spl times/40/spl times/1 mm/sup 3/ (FR-4, permittivity 4.6). The impedance bandwidth for 10 dB return loss is about 400 MHz (from 2170 to 2570 MHz) at 2.4 GHz band and over 2300 MHz (from 4690 to beyond 7000 MHz) at 5 GHz band. The measured radiation gains range from 1.20 to 1.41 dBi at 2.4 GHz band and from 2.25 to 3.44 dBi at 5 GHz band, respectively.