Investigation of optical losses in photoelastic and ridge waveguides in GaAs-AlGaAs heterostructures

Two approaches have been used to fabricate stable photoelastic waveguides with planarized surfaces on GaAs-AlGaAs heterostructures. The first approach uses tensile Ni/sub 3/GaAs stressors formed by metal-semiconductor reactions. The second approach uses inert, refractory and compressive stressors, such as RF sputtered W and RF co-sputtered WNi films. For comparison purposes, ridge waveguides have also been fabricated using the same heterostructure by a dry etching technique. Optical losses of photoelastic waveguides, measured by Fabry-Perot (FP) method at a wavelength of 1.53 /spl mu/m, are comparable to or better than those of the ridge waveguides. Material loss appears to be the primary loss mechanism in both photoelastic and ridge waveguides. These results indicate that the photoelastic waveguide processing technique reported in this study is a promising alternative to commonly used dry etching techniques for planarization.     

The prediction of solute transport in surcharged manholes using CFD.

Solute transport processes occur within a wide range of water engineering structures, and urban drainage engineers increasingly rely on modelling tools to represent the transport of dissolved materials. The models take as input representative travel time and dispersion characteristics for key system components, and these generally have to be identified via field or laboratory measurements. Computational Fluid Dynamics (CFD) has the potential to reveal the underlying hydraulic processes that control solute transport, and to provide a generic means of identifying relevant parameter values. This paper reports on a study that has been undertaken to evaluate the feasibility of utilising a CFD-based approach to modelling solute transport. Discrete phase modelling has been adopted, as this is computationally efficient and robust when compared with the time-dependent solution of the advection-dispersion equation. Simulation results are compared with published laboratory data characterising the dispersion effects of surcharged manholes, focusing specifically on an 800 mm diameter laboratory manhole for a flowrate of 0.002 m(3)/s and a range of surcharge depths. Preliminary indications are that the CFD results adequately replicate the measured downstream temporal concentration profiles, and that a threshold surcharge depth, corresponding to a change in hydraulic regime within the manhole, can also be identified.     

Transformations for nonideal uniform circular arrays operating in correlated signal environments

The Davies transformation is a method to transform the steering vector of a uniform circular array (UCA) to one with Vandermonde form. As such, it allows techniques such as spatial smoothing for direction-of-arrival (DOA) estimation in a correlated signal environment, developed originally for uniform linear arrays, to be applied to UCAs. However, the Davies transformation can be highly sensitive to perturbations of the underlying array model. This paper presents a method for deriving a more robust transformation using optimization techniques. The effectiveness of the method is illustrated through a number of DOA estimation examples.     

A heuristic for the label printing problem

Label printing finds many applications in industry. However, this task is still labor intensive in many printing factories. Since each template can only accommodate a fixed number of labels, an important task is to work out the compositions of templates by allocating suitable labels to each template in order to fulfill the order requirements effectively. The template design could be rather arbitrary, which usually ends up with a lot of excessive printed labels. Enhancing the template design will significantly improve the efficiency of the printing process, and, at the same time, reduce the waste of resources. This motivates the study of more automatic design methods. In this paper, the problem is first formulated as a nonlinear integer programming problem. The main variables in the formulation are the compositions and the printing frequencies of templates. For practical purpose, each type of label is confined to one template only which allows automated packing and handling. The structure of the problems is carefully analyzed and a new algorithm is proposed. Numerical results show that the proposed method is a simple but effective way of generating good template designs.     

Critical issues of wafer level chip scale package (WLCSP) withemphasis on cost analysis and solder joint reliability

Some of the critical issues of wafer level chip scale package (WLCSP) are mentioned and discussed in this investigation. Emphasis is placed on the cost analysis of WLCSP through the, important parameters such as wafer-level redistribution, wafer-bumping, and wafer-level underfilling. Useful and simple equations in terms of these parameters are also provided. Furthermore, the effects of microvia build-up layer on the solder joint reliability of WLCSP on printed circuit board (PCB) through the creep responses such as the deformation, hysteresis loops, and stress and strain are presented. Only solder-bumped with pad-redistribution WLCSPs are considered in this study     

Clinical and experimental observation of xilixin granule combined with radiotherapy in treating malignant-tumors

Thirty six patients of pulmonary or nasopharyngeal carcinoma were treated with Xilixin granule (XLXG) combined with radiotherapy and compared their efficacy with that of 31 patients treated by Zhenqi Fuzheng granule combined with radiotherapy for control. Results showed that the symptoms of Yin Deficiency syndrome in treated group were obviously improved, the leucocyte decreased by 5.6%, while in control group it reached 25.8%, the 3 year survival rate was significantly higher in treated group (75.0%) than that in control group (51.6%). Animal experiment revealed that XLXG had the effects of tumor inhibition, it could increase white blood cells, platelets and hemoglobin of patients, especially in using large dosage. These results suggested that XLXG have some protective effect against radiotherapeutic damage in patients with malignant tumor.     

Effect of oestradiol on ovarian oxytocin secretion rate and luteolysis in the ewe after ovarian auto-transplantation

The release of ovarian oxytocin and uterine prostaglandin (PG)F2alpha in response to an oestradiol stimulus was investigated. On Day 15 post-oestrus, ten ewes with ovarian auto-transplants (n=5 per group) received an intra-muscular injection of either oestradiol benzoate (50 microg) or vehicle. Blood samples were collected from the ovarian and jugular veins at 30 and 0 min before, and at 15-min intervals up to 540 min after, injection. The secretion rate of ovarian progesterone remained elevated in four of five treated ewes and in all control ewes, indicating the presence of a functional corpus luteum. Peripheral oestradiol concentrations were significantly (P < 0.001) higher in treated than in control ewes. The number of ewes that released pulses of ovarian oxytocin > or =240 min following oestradiol benzoate injection was significantly (P < 0 05) greater than that in control ewes. Mean amplitude and area under both ovarian-vein oxytocin and jugular-vein 15 keto-13,14 dihydro prostaglandin F2alpha (PGFM) pulses were significantly increased in the treated ewes. These findings demonstrate that the administration of exogenous oestrogen provides a positive stimulus for the release of ovarian oxytocin and uterine PGF2alpha in the ovarian auto-transplanted ewe.     

Pollination-enhanced expression of a receptor-like protein kinase related gene in tobacco styles

We have isolated a putative serine/threonine receptor kinase gene with an expression pattern indicating that it may play a role in the stylar response to pollination. Differential display PCR was used to select tobacco mRNAs with increased accumulation following pollination. NTS16, a cDNA identified by this method, is homologous to a ca. 2.4 kb mRNA primarily expressed in pistil tissues. Levels of this mRNA increase during floral development and are further increased by pollination reaching maximal accumulation 12-18 hours after pollination and then declining. mRNA levels can also be increased by the application of ethylene to unpollinated flowers. A polypeptide encoded by the NTS 16 open reading frame has sequence similarity to the catalytic domain of several receptor protein kinases from plants including the S-receptor kinases implicated in the rejection of self-pollen in Brassica species and the Pto gene product of tomato which confers resistance to a bacterial pathogen.     

Performance analysis of adaptive interleaving for OFDM systems

We proposed a novel interleaving technique for orthogonal frequency division multiplexing (OFDM), namely adaptive interleaving, which can break the bursty channel errors more effectively than traditional block interleaving. The technique rearranges the symbols according to instantaneous channel state information of the OFDM subcarriers so as to reduce or minimize the bit error rate (BER) of each OFDM frame. It is well suited to OFDM systems because the channel state information (CSI) values of the whole frame could be estimated at once when transmitted symbols are framed in the frequency dimension. Extensive simulations show that the proposed scheme can greatly improve the performance of the coded modulation systems utilizing block interleaving. Furthermore, we show that the adaptive interleaving out performs any other static interleaving schemes, even in the fast fading channel (with independent fading between symbols). We derived a semi-analytical bound for the BER of the adaptive interleaving scheme under correlated Rayleigh fading channels. Furthermore, we discussed the transmitter-receiver (interleaving pattern) synchronization problem