电石包装桶中乙炔气处理简述

电石在远距离运输过程中，受潮湿，生成乙炔气，遇明火燃烧或发生爆炸。对从业人员造成巨大危害。如何处理包装桶中的乙炔气成为电石产业的物流运输瓶颈。我公司在原来包二化比较实用的氮气置换基础上，逐渐形成了成熟的可使200KG大桶和100KG小桶中各种粒度电石包装桶中乙炔气浓度有效降低的出口电石质量控制体系。     

Studies on multilayer film coextrusion III. The rheology of blown film coextrusion

Multilayer blown film coextrusion was studied, both experimentally and theoretically. For the experimental study, an annular die with a feed-port system was designed and multilayer blown films were produced by rotating the inner mandrel with a one horsepower variable-speed drive at speeds from nearly 2 to 6 rpm, and by inflating the tubular molten film with air. The die has 16 feed slots and melt pressure transducers are mounted along the axial direction of the outer wall of the annular flow channel. The transducers were used to determine the pressure gradient in the annular flow channel, which then permitted determination of the reduction in pressure drop when different combinations of two polymer systems were coextruded. Polymers used for b own film coextrusion were: (1) low-density polyethylene with ethylene-vinyl acetate; (2) low-density polyethylene with high-density polyethylene; (3) low-density polyethylene with polypropylene; (4) high-density polyethylene with ethylene-vinyl acetate. For the theoretical study, stratified helical flow was analyzed using a power-law non-Newtonian model. A computational procedure was developed to predict the number of layers, layer thickness, and the volumetric flow rate as functions of certain processing variables (namely, the pressure drop in the die, and the angular speed of rotation of the inner mandrel of the die) and the rheological parameters of the individual polymers concerned. Comparison was made of the theoretical prediction of volumetric flow rate with experimental ones. Some representative results are presented of the theoretically predicted axial and angular velocity distributions, shear stress profiles, and shear rate profiles.     

混合电解质NaBr+NaAc十H_2O体系的活度系数的测定

用电势法测定了298.15K以及I为0.1、0.5、1.0、1.5、2.0、2.5和3.0 mol/kg时,NaBr在混合电解质溶液NaBr+NaAc+H_2O中的活度系数.实验结果用Harned、SRJ和Pitzer方程拟合,得到各种方程的相互作用参数,由拟合的标准偏差得知,Pitzer方程的拟合精度略好于前2个方程.用Pitzer混合参数θ_(Br-Ac)和ψ_(Br-Na-Ac)计算了NaAc在该混合体系中的活度系数和体系的过量Gibbs自由能.     

Precise localization of eye centers with multiple cues

Automatic detection and precise localization of human eye centers are the essential processes in photo related multimedia applications. Since eye center points are used as reference base points for further intelligent processing, precise eye center localization is very important. In face recognition the accuracy of localization of eye centers directly influences the identification accuracy. A multiple stage approach with multiple cues for detection and precise localization of eye centers is presented in this paper. Multiple scopes searching strategy is used for correctly extracting eye patch images from the background. Dedicated gradient based features and curvelet based features are constructed and used for comprehensively revealing the intensity distribution characteristics and the edge based texture around eye centers. A rebuilt score calculation mechanism is proposed and the rebuilt scores are used as a specific measurement index reflecting the matching accuracy. The final localizations of eye centers are determined with integrating the gradient based scores and curvelet based scores. The experiment results testing on public face datasets show that the localization accuracy of proposed approach outperforms the accuracy with other state of the art methods.     

Decentralized weighted control for a class of large‐scale systems with multi‐modes

In this paper, the control synthesis problem for a class of large‐scale systems with multi‐modes that are called large‐scale switched systems is addressed. By introducing the concept of decentralized switching signal and the relevant decentralized average dwell time, the asymptotic stability and weighted ?₂ gain performance are investigated. It should be noted that the decentralized switching covers general switching cases for large‐scale switched systems, namely, it admits both time‐dependent switching signal and arbitrary switching signal blended in the decentralized switching. Then, on the basis of the analysis results, the decentralized weighted control scheme including state feedback controller gains and switching signals is studied. Several design algorithms are proposed to meet different controller design problems. Finally, numerical examples are provided to illustrate theoretical findings within this paper. Copyright © 2013 John Wiley & Sons, Ltd.     

Rheology-processing-property relationships in tubular blown film extrusion. I. High-pressure low-density polyethylene

Three different grades of high-pressure low-density polyethylene resin were used to establish relationships between tubular film blowability and the molecular parameters, namely, the molecular weight distribution (MWD) and the degree of long-chain branching (LCB), and also between the processing conditions and the mechanical properties of the tubular blown films produced. For the study, both the shearing and elongational flow properties of the resins were determined. During the tubular film blowing experiment we measured the freeze-line position, the tubular bubble diameter, the takeup speed, the axial tension, the pressure inside the tubular bubble, and the mass flow rate of the resin. The thickness of the tubular blown films was measured from the samples collected. In order to determine the tubular film blowability, we measured the maximum takeup speed at which the tubular blown bubble broke, for various blowup ratios. The measurements described above permitted us to calculate the tensile stresses at the freeze line, in both the machine and transverse directions, and they were found to be correlatable to the processing conditions employed. It has been found that the tubular film blowability is increased as the resin's MWD becomes narrower and the degree of LCB is less. It has been found further that a resin having lower elongational viscosity tends to give a greater draw-down ratio, indicating a better tubular film blowability. Finally, the tensile properties of the tubular blown films were found correlatable to the processing variables, namely, blowup and takeup ratios.     

"团队项目训练法"在市场营销实践教学中的应用——以"与爱同行"营销策划综合训练为例

“团队项目训练法”是充分利用各种市场资源,按照市场营销工作实际,让学生自组团队、自寻商机、自设项目,理论联系实际分析营销环境．对真实对象进行市场营销方案设计、实施、评估,亲历市场营销的完整过程,以此进一步掌握理论,训练技能,提高能力。介绍了重庆科技学院对市场营销专业本科生运用“团队训练法”进行实践教学的做法及效果。     

PAN浸渍树脂对锌(Ⅱ)吸附特性的研究

研究了PAN浸渍树脂对锌（Ⅱ）离子的吸附特性。结果表明,对Zn（Ⅱ）吸附的最佳pH为6.0;其吸附动力学实验数据与二级动力学模型相吻合,表明化学吸附过程为速率控制步骤。     

An ultrahigh-resolution image encryption algorithm using random super-pixel strategy

Multimedia Tools and Applications - Almost all existing image encryption algorithms are only suitable for low-resolution images in the standard image library. When they are used to encrypt...     

Influence of static pre-loading on the dynamic bending strength of concrete with particle element modeling

Experimental tests show that static pre-loading has a significant effect on the dynamic strength of concrete.Based on meso-scale particle element model,numerical simulations of dynamic bending tests with pre-loading are performed.Complete stress–strain relationships are then obtained.Significant increase in dynamic strength is found when the pre-loadings are imposed within the elastic limit of concrete.However,when the imposition of pre-loadings reaches the plastic or softening range,dynamic strengths may gradually decrease along with the increase in pre-loadings.The distribution of energy components and the failure modes are discussed to explain the mechanisms of the phenomena.