Avoiding filter cake cracking: Influence of consolidation on desaturation characteristics

In cake filtration processes with an air-blowing step, cracking is an undesirable phenomenon as it leads to deterioration of the filtration process by highly increasing gas throughput. This leads to higher residual moisture if the pressure difference cannot be maintained and an increase in overall cost. Crack formation can be avoided by compacting the filter cake before desaturation. While this action will make the separation process applicable by highly reducing gas consumption, there are also potential negative effects. Compaction increases filter cake resistance and might therefore slow down desaturation kinetics. Therefore, the authors investigated how the filter cake characteristics governing desaturation change from the nonconsolidated to the consolidated state of the filter cake and compared these findings to the actual dewatering kinetics. The results showed that for the case where cracking could be oppressed, dewatering kinetics of the consolidated cake are actually faster than for the nonconsolidated cake, despite higher resistance of the consolidated cake. Thus, compaction is an appropriate action when dealing with filter cake cracking.     

Controlling micro‐ and nanofibrillar morphology of polymer blends in low‐speed melt spinning process. Part II: Influences of extrusion rate on morphological changes of a PLA/PVA blend through a capillary die

The effects of the extrusion rate on the morphological changes of poly(lactic acid) (PLA)/poly(vinyl alcohol) (PVA) blend through a capillary die were investigated. In this study, the extrusion rate or mass flow rate is altered from 0.5 g min^?1 to 2 g min^?1 with an increment of 0.5 g min^?1. The PLA/PVA blend with a composition of 30/70 (wt %) exhibits a particle matrix morphology with dispersed PLA droplets within the PVA matrix. It is found that, the spherical or ellipsoidal dispersed PLA droplets are elongated and coalesced into rod‐like or longer ellipsoidal droplets when they pass through the capillary die. When the extrusion rate increases, the coalescence between the large PLA droplets occurs more intense. However, the changes of the extrusion rate have no strong effect on the coalescence of small droplets having diameter less than about 150 nm. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44257.     

Melt spun matrix fibers of toughened polypropylene copolymers modified by high energy electrons

Binary blends of polypropylene (PP) and ethylene‐octene copolymer (EOC) are prepared by continuous electron‐induced reactive processing at various mass ratios of the blend components and various doses without adding of any grafting agents. The influence of mass ratio and dose is investigated in order to get the optimum processing behavior of toughened PP as well as optimum properties of resulting fibers. It is found that toughened PP with a PP/EOC blend ratio of 97.5–2.5  mass % can be used advantageously as a matrix component for the process of online spinning of glass fiber/toughened PP hybrid yarns. Such hybrid yarns belong to one of the most advanced production methods for the manufacturing of fiber reinforced thermoplastic composites with an increased mechanical performance. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44011.     

Synthesis and Characterization of Pure Phase Zn(II) and Cd(II) Oxide Nanoparticles via Thermal Decomposition of Four New Zn(II) and Cd(II) Coordination Polymers

Four new Zn(II) and Cd(II) coordination polymers, [Zn(2-AMP)₂(N₃)₂]_n (1), [Zn(2-AMP)₂(SCN)₂]_n (2), [Cd(2-AMP)(N₃)₂]_n (3) and [Cd(2-AMP)₂(SCN)₂]_n (4) {2-AMP: 2-Aminomethylpyridine}, have been synthesized and characterized by single crystal X-ray diffraction, IR spectroscopy and elemental analyses. The Zinc(II) oxide and Cadmium(II) oxide nano-particles have been synthesized from thermolysis of 1–4 at 600 °C under air atmosphere for 4 h. The ZnO and CdO nanoparticles were characterized by X-ray diffraction and scanning electron microscopy (SEM). SEM images show the average size of produced ZnO and CdO nanoparticles are 60–70 nm in all compounds.     

Screening,Molecular Cloning,and Biochemical Characterization of an Alcohol Dehydrogenase from Pichia pastoris Useful for the Kinetic Resolution of a Racemic β‐Hydroxy‐β‐trifluoromethyl Ketone

The stereoselective synthesis of chiral 1,3‐diols with the aid of biocatalysts is an attractive tool in organic chemistry. Besides the reduction of diketones, an alternative approach consists of the stereoselective reduction of β‐hydroxy ketones (aldols). Thus, we screened for an alcohol dehydrogenase (ADH) that would selectively reduce a β‐hydroxy‐β‐trifluoromethyl ketone. One potential starting material for this process is readily available by aldol addition of acetone to 2,2,2‐trifluoroacetophenone. Over 200 strains were screened, and only a few yeast strains showed stereoselective reduction activities. The enzyme responsible for the reduction of the β‐hydroxy‐β‐trifluoromethyl ketone was identified after purification and subsequent MALDI‐TOF mass spectrometric analysis. As a result, a new NADP⁺‐dependent ADH from Pichia pastoris (PPADH) was identified and confirmed to be capable of stereospecific and diastereoselective reduction of the β‐hydroxy‐β‐trifluoromethyl ketone to its corresponding 1,3‐diol. The gene encoding PPADH was cloned and heterologously expressed in Escherichia coli BL21(DE3). To determine the influence of an N‐ or C‐terminal His‐tag fusion, three different recombinant plasmids were constructed. Interestingly, the variant with the N‐terminal His‐tag showed the highest activity; consequently, this variant was purified and characterized. Kinetic parameters and the dependency of activity on pH and temperature were determined. PPADH shows a substrate preference for the reduction of linear and branched aliphatic aldehydes. Surprisingly, the enzyme shows no comparable activity towards ketones other than the β‐hydroxy‐β‐trifluoromethyl ketone.