Alternate and new brominated flame retardants detected in U.S. house dust

Due to the voluntary withdrawals and/or bans on the use of two polybrominated diphenyl ether (PBDE) commercial mixtures, an increasing number of alternate flame retardant chemicals are being introduced in commercial applications. To determine if these alternate BFRs are present in indoor environments, we analyzed dust samples collected from 19 homes in the greater Boston, MA area during 2006. Using pure and commercial standards we quantified the following brominated flame retardant chemicals using GC/ECNI-MS methods: hexabromocyclododecane (sigma HBCD), bis(2,4,6,-tribromphenoxy)ethane (BTBPE), decabromodiphenyl ethane (DBDPE), and the brominated components found in Firemaster 550 (FM 550): 2-ethylhexyl 2,3,4,5-tetrabromobenzoate (TBB) and (2-ethylhexyl)tetrabromophthalate (TBPH), the latter compound being a brominated analogue of di(2-ethylhexyl)phthalate (DEHP). The concentrations of all compounds were log-normally distributed and the largest range in concentrations was observed for HBCD (sum of all isomers), with concentrations ranging from <4.5 ng/g to a maximum of 130,200 ng/g with a median value of 230 ng/g. BTBPE ranged from 1.6 to 789 ng/g with a median value of 30 ng/g and DBDPE ranged from <10.0 to 11,070 ng/g with a median value of 201 ng/g. Of the FM 550 components, TBB ranged from <6.6 to 15,030 ng/g with a median value of 133 ng/g; whereas TBPH ranged from 1.5 to 10,630 ng/g with a median value of 142 ng/g. Furthermore, the ratio of TBB/TBPH present in the dust samples ranged from 0.05 to 50 (average 4.4), varying considerably from the ratio observed in the FM 550 commercial mixture (4:1 by mass), suggesting different sources with different chemical compositions, and/or differential fate and transport within the home. Analysis of paired dust samples collected from different rooms in the same home suggests HBCD, TBB, and TBPH are higher in dust from the main living area compared to dust collected in bedrooms; however, BTBPE and DBDPE levels were comparable between rooms. This study highlights the fact that numerous types of brominated flame retardants are present in indoor environments, raising questions about exposure to mixtures of these contaminants.     

In vivo and in vitro debromination of decabromodiphenyl ether (BDE 209) by juvenile rainbow trout and common carp

Decabromodiphenyl ether (BDE 209), the major congener in the high volume industrial flame retardant mixture "DecaBDE", has recently been shown to be metabolized by carp. To further explore this phenomenon, juvenile rainbow trout were exposed to BDE 209 via the diet for a five month period. Analysis of the whole body homogenate, liver, serum, and intestinal tissues revealed that BDE 209 accumulated in rainbow trout tissues and was most concentrated in the liver. In addition to BDE 209, several hepta-, octa-, and nonaBDE congeners also accumulated in rainbow trout tissues over the same period as a result of BDE 209 debromination. Based on the total body burden of the hepta- through decaBDE congeners, uptake of BDE 209 was estimated at 3.2%. Congener profiles were different among whole body homogenate, liver, and serum, with the whole body homogenates having a greater contribution of the debrominated biotransformation products. Extracts of the rainbow trout whole body homogenates were compared with extracts from a previous experiment with common carp. This comparison revealed that BDE 202 (2,2',3,3',5,5',6,6'-octabromodiphenyl ether) was a dominant debromination product in both studies. To determine whether the observed debromination was metabolically driven, liver microsomal fractions were prepared from both common carp and rainbow trout. Analysis of the microsomal fractions following incubation with BDE 209 revealed that rainbow trout biotransformed as much as 22% of the BDE 209 mass, primarily to octa- and nonaBDE congeners. In contrast, carp liver microsomes biotransformed up to 65% of the BDE 209 mass, primarily down to hexaBDE congeners. These microsomal incubations confirm a metabolic pathway for BDE 209 debromination.     

Hexabromocyclododecanes (HBCDs) in the environment and humans: a review

Hexabromocyclododecanes (HBCDs) are brominated aliphatic cyclic hydrocarbons used as flame retardants in thermal insulation building materials, upholstery textiles, and electronics. As a result of their widespread use and their physical and chemical properties, HBCDs are now ubiquitous contaminants in the environment and humans. This review summarizes HBCD concentrations in several environmental compartments and analyzes these data in terms of point sources versus diffuse sources, biomagnification potential, stereoisomer profiles, time trends, and global distribution. Generally, higher concentrations were measured in samples (air, sediment, and fish) collected near point sources (plants producing or processing HBCDs), while lower concentrations were recorded in samples from locations with no obvious sources of HBCDs. High concentrations were measured in top predators, such as marine mammals and birds of prey (up to 9600 and 19 200 ng/g lipid weight, respectively), suggesting a biomagnification potential for HBCDs. Relatively low HBCD concentrations were reported in the few human studies conducted to date (median values varied between 0.35 and 1.1 ng/g lipid weight). HBCD levels in biota are increasing slowly and seem to reflect the local market demand. One important observation is the shiftfrom the high percentage of the gamma-HBCD stereoisomer in the technical products to a dominance of the alpha-HBCD stereoisomer in biological samples. A combination of factors such as variations in solubility, partitioning behavior, uptake, and, possibly, selective metabolism of individual isomers may explain the observed changes in stereoisomer patterns. Recommendations for further work include research on how HBCDs are transferred from products into the environment upon production, use, and disposal. Time trends need to be analyzed more in detail, including HBCD stereoisomers, and more data on terrestrial organisms are needed, especially for humans. Whenever possible, HBCDs should be analyzed as individual stereoisomers in order to address their fate and effects.     

Forest bioenergy or forest carbon? Assessing trade-offs in greenhouse gas mitigation with wood-based fuels

The potential of forest-based bioenergy to reduce greenhouse gas (GHG) emissions when displacing fossil-based energy must be balanced with forest carbon implications related to biomass harvest. We integrate life cycle assessment (LCA) and forest carbon analysis to assess total GHG emissions of forest bioenergy over time. Application of the method to case studies of wood pellet and ethanol production from forest biomass reveals a substantial reduction in forest carbon due to bioenergy production. For all cases, harvest-related forest carbon reductions and associated GHG emissions initially exceed avoided fossil fuel-related emissions, temporarily increasing overall emissions. In the long term, electricity generation from pellets reduces overall emissions relative to coal, although forest carbon losses delay net GHG mitigation by 16-38 years, depending on biomass source (harvest residues/standing trees). Ethanol produced from standing trees increases overall emissions throughout 100 years of continuous production: ethanol from residues achieves reductions after a 74 year delay. Forest carbon more significantly affects bioenergy emissions when biomass is sourced from standing trees compared to residues and when less GHG-intensive fuels are displaced. In all cases, forest carbon dynamics are significant. Although study results are not generalizable to all forests, we suggest the integrated LCA/forest carbon approach be undertaken for bioenergy studies.     

Efficacy of an advanced sewage treatment plant in southeast Queensland, Australia, to remove estrogenic chemicals

The estrogenicity profile of domestic sewage during treatment at a medium-sized (3800 EP) advanced biological nutrient removal plant in Queensland, Australia, was characterized using a sheep estrogen receptor binding assay (ERBA) and the MCF-7 breast cancer cell proliferation assay (E-Screen). The raw influent was highly estrogenic (20-54 ng/L EEq), and primary treatment resulted in a slight increase in estrogenicity that was detected in one of the assays (6-80 ng/L). Concurrent chemical analysis suggested that most of the estrogenicity in the influent was due to natural hormones (>48%). Secondary activated sludge treatment followed by nitrification/denitrification effectively removed > 95% of the estrogenic activity (to <0.75-2.6 ng/L), and estrogenicity of the final tertiary-treated effluent was below the detection limit of both assays (<0.75 ng/L).     

Serum levels of polybrominated diphenyl ethers (PBDEs) in foam recyclers and carpet installers working in the United States

Increased exposure to the flame retardants known as polybrominated diphenyl ethers (PBDEs) may be expected to occur during the recycling of polyurethane foam containing these chemicals. To date, no studies in the United States have investigated occupational exposure to these flame retardants during recycling processes. The objective of the present study was to determine if individuals working in foam recycling facilities, and/or carpet installers who may install carpet padding manufactured from recycled foam, possess significantly higher PBDE serum levels relative to that of the general U.S. population. As a control group, serum was collected from four spouses and one clerical worker. In addition, levels in workers were also compared to the recently published national health and nutrition examination survey (NHANES) data set on PBDEs in the general U.S. population. Serum samples were collected in duplicate and analyzed by two different laboratories as quality control. Total PBDE levels were found to be significantly higher (p < 0.05) in the individuals recycling foam and installing carpet (n = 15) relative to the control group (n = 5). Median sigmaPBDE levels in the foam recyclers, carpet layers, and control group were 160, 178, and 19 ng/g lipid, respectively. In contrast, concentrations of a polybrominated biphenyl (BB-153) and a polychlorinated biphenyl (CB-153) were equivalent among all groups tested. The PBDE congeners BDE-47, 99, 100, and 153 contributed 90% of the sigmaPBDE concentration in serum and no differences in congener patterns were apparent among the different groups. Relative to concentrations measured in the NHANES, foam recyclers and carpet layers have body burdens that are an order of magnitude higher. These data suggest individuals recycling foam-containing products, and/ or using products manufactured from recycled foam (i.e., carpet padding), have higher body burdens of PBDEs, and thus may be at higher risk from adverse health effects associated with brominated flame retardant exposure.     

Growth, yield and seed composition of native Australian legumes with potential as grain crops

BACKGROUND: Many Australian native legumes grow in arid and nutrient‐poor environments. Yet few Australian herbaceous legumes have been investigated for domestication potential. This study compared growth and reproductive traits, grain yield and seed composition of 17 native Australian legumes with three commercial grain legumes. RESULTS: Seed yields of seven native legumes were > 40% of Cicer arietnum, with highest seed yields and harvest indices in Glycine sp. (14.4 g per plant, 0.54 g g^?1) and Lotus cruentus (10.2 g per plant, 0.65 g g^?1). Five native species flowered earlier than field pea (Pisum sativa) (109 days), though many were slower to flower and set seed. Largest seeds were found in Glycine canescens (17 mg), with seed of other native species 14 times smaller than commercial cultivars. Seed composition of many native legumes was similar to commercial cultivars (200–330 g protein kg^?1 dry weight (DW), 130–430 g dietary fibre kg^?1 DW). Two Cullen species had high fat content (>110 g kg^?1 DW) and Trigonella sauvissima had the highest crude protein content (370 g kg^?1 DW). CONCLUSION: The seed composition and reproductive traits of some wild native Australian legumes suggest they could offer potential as grain crops for soils and environments where the current grain legumes are uneconomic. Further evaluation of genetic diversity, especially for seed size, overall productivity, and reproductive development is needed. Copyright © 2011 Society of Chemical Industry     

The American Community Survey: Warmer (More Current), but Fuzzier (Less Precise) than the Decennial Census

The American Community Survey, which will replace data many planners rely on from the decennial Census long form, is finally in progress. The first nationwide data for places of 65,000 or more was released in the summer of 2006. It has several interesting implications for planning. On the one hand, more current data will eliminate many of the inaccuracies introduced by projection-based updates of stale census data. On the other, smaller sample sizes will mean we will have less precise estimates. Because the ACS will use averaged rather than point-in-time data, it will measure slightly different things than the decennial census. Finally, planners should be alert to the opportunities they will have to improve local data quality by improving the address file from which the sample is drawn.