Analyzing an inventory system with multiple reorder points and periodic replenishment

This paper investigates multiple reorder point, periodic replenishment systems similar to those utilized on board some U.S. naval vessels for Selected Item Management (SIM). This inventory system is of interest since it involves both regular and priority replenishment, three reorder points, and cyclical restocking of regular orders. A simulation model is developed to study the impact of demand distribution, cycle time, priority order leadtime, and the quantity of units ordered on the performance of the system. It is found that the frequency of service and days without shortages performance measures can be maximized by setting the reorder points at equal intervals between the zero level and the high level. Also, a power approximation model is presented that estimates the high level that will lead to a desired percent days without shortage percentage.     

Solution Phase Preparative Routes to Nitride Morphologies of Interest in Catalysis

This review assesses the track record and prospects of non-oxide sol–gel and solvothermal routes to nitride materials for use in catalysis. There is a strongly developing body of synthesis methods that yield highly porous materials, some with engineered pore structures, nanocrystalline materials with high surface areas and anisotropic nanocrystals that have their surface area tuned to a particular crystal face. Most of the existing catalytic work on such solution-derived nitrides has focussed on utilising base properties due to surface bound amide and imide groups in silicon (imido)nitride compositions, but there are opportunities to extend these methods to other interesting nitride compositions.     

Realistic model for the multiple‐input floating‐gate transistor

Multiple‐input floating‐gate transistor (FGMOS) circuit designers face a serious problem along the design process: the lack of a realistic simulation model. For this reason, a solution that properly predicts the initial voltage at the floating gates is presented in this paper. In order to assess the performance of the proposal, a comparison is made against a test circuit fabricated in a 0.5‐µm On‐Semiconductor CMOS process. Based on this comparison, the proposed model is shown to be a fundamental tool in the design of FGMOS circuits. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Daily living activity recognition based on statistical feature quality group selection

The benefits arising from proactive conduct and subject-specialized healthcare have driven e-health and e-monitoring into the forefront of research, in which the recognition of motion, postures and physical exercise is one of the main subjects. We propose here a multidisciplinary method for the recognition of physical activity with the emphasis on feature extraction and selection processes, which are considered to be the most critical stages in identifying the main unknown activity discriminant elements. Efficient feature selection processes are particularly necessary when dealing with huge training datasets in a multidimensional space, where conventional feature selection procedures based on wrapper methods or ‘branch and bound’ are highly expensive in computational terms. We propose an alternative filter method using a feature quality group ranking via a couple of two statistical criteria. Satisfactory results are achieved in both laboratory and semi-naturalistic activity living datasets for real problems using several classification models, thus proving that any body sensor location can be suitable to define a simple one-feature-based recognition system, with particularly remarkable accuracy and applicability in the case of the wrist.     

Analytical Method for Forming Limit Diagram Prediction with Application to a Magnesium ZEK100-O Alloy

A significant barrier to broader implementation of magnesium alloys is their poor room temperature formability, a consequence of the anisotropic response of the Mg hexagonal closed-packed (hcp) crystal structure. Additions of rare earth (RE) elements, such as in the ZEK100 alloys, weaken the texture and improve formability. Room temperature forming limit analyses of RE-containing Mg alloys, particularly Mg ZEK100, have not been explored to any significant extent in the literature. In this paper, strain-based forming limit diagrams (FLDs) are derived for an Mg ZEK100-O alloy (Zn1.34Zr0.23Nd0.182, wt.%) using an analytical method that combines the vertex theory of Storen and Rice (J Mech Phys Solids, 23:421-441, 1979), the anisotropic yield criterion of Barlat and Lian (Int J Plast, 5:51-66, 1989), and a hardening law. The method does not rely on assumptions about pre-existing defects, is broadly applicable to sheet alloys exhibiting in-plane anisotropy requiring a higher-order yield criterion, and requires only minimal experimental inputs. Results from the analytical method are compared with experimentally derived FLDs based upon the well-known Nakajima test and tensile deformation, and with predictions from an existing analytical method for FLDs. Close agreement between the experimentally derived FLDs and the present theoretical method was obtained. Sheet materials where the theoretical method does not apply are also discussed.     

Time-Dependent Reliability Analysis of FRP Rehabilitated Pipes

The goal of this paper is to present work that demonstrates the application of probabilistic modeling to evaluate the long-term performance of fiber-reinforced polymer (FRP) rehabilitated piping components. The time-dependent reliability index is evaluated for a fully deteriorated piping component rehabilitated with FRP considering the demands of internal fluid pressure, external soil pressure, and traffic loading. Carbon FRP (CFRP) and glass FRP (GFRP) composites are compared and the influence of material deterioration, fiber volume fraction (FVF), and variation in thickness of the composite are assessed using a first order reliability method and compared to a steel pipe under similar loading. A CFRP rehabilitation scheme having a FVF greater than 40% would be needed to exceed the as-built reliability index of a steel pipe under time-dependent composite deterioration, while no practical GFRP FVF can achieve the performance of steel pipe in the presence of time-dependent composite deterioration. Variations in the coefficient of variation (COV) can adversely affect the safety of both FRP rehabilitation schemes where an increase in COV from 10 to 30% result in decreases in the reliability index by 39.4% for CFRP (40% FVF) and 39.7% for GFRP (40% FVF).     

Immobilized lipase reactors for modification of fats and oils—A review

This review focuses on the use of immobilized lipase technology to effect hydrolysis, ester synthesis, and interesterification reactions. The various immobilization procedures, reactor configurations, and process considerations are all reviewed and discussed.     

On the role of material property gradients in noncontacting thermoelectric NDE

Inclusions and other types of imperfections in nonmagnetic metals can be nondestructively detected by noncontacting magnetic measurements that sense the thermoelectric currents produced by directional heating and cooling of the specimen. The detectability of small and/or weak imperfections is ultimately limited by the intrinsic anisotropy and inhomogeneity of the material to be inspected. This paper investigates the spurious magnetic signature produced by the simplest type of macroscopic inhomogeneity when the material properties exhibit a linear spatial variation in the cross section of a slender bar. An analytical method has been developed for calculating the normal and tangential magnetic fields produced by the resulting thermoelectric currents. Experimental results from a highly inhomogeneous artificial copper/brass sintered specimen were found to be in very good quantitative agreement with our theoretical predictions and fully verified our analytical model. Similar measurements on a weakly inhomogeneous Ti–6Al–4V titanium-alloy bar were also shown to be in very good qualitative agreement with the predictions of the analytical model although the unexpectedly high magnitude of the observed signatures could not be verified by conventional contact measurements, therefore further efforts are needed to better understand the underlying physical phenomenon and clarifying the relationship between the strength of the signature and the very complex microstructural features of this popular high-strength alloy.     

Nitrogen mineralization of sewage sludge and composted poultry manure applied to willow in a greenhouse experiment

Nitrogen requirements for production of intensively cultured willow for use as a bioenergy crop coupled with the need for safe disposal of nutrient rich organic wastes provide an opportunity to reduce costs associated with bioenergy plantations. In order to minimize N leaching from sites treated with organic wastes, knowledge of the rate of N mineralization is needed. The objective of this study was to assess N mineralization rates of four organic residuals in a controlled greenhouse environment: composted poultry manure, composted sewage sludge, and anaerobically digested sewage sludge from two different municipalities. Thirty-six weeks after application, disappearance of the mass initially applied ranged from 20% to 50%. Gross nitrogen mineralization rate (N mass released expressed as a percentage of initially applied N) ranged from 12% to 57%. Non-composted treatments released greater amounts of nitrogen than composted treatments. Within composted treatments, net N release was estimated as 325 kgNha⁻¹ for poultry manure and 86 kgNha⁻¹ for sewage sludge. Syracuse and New York City sewage sludges, with 57% and 30% gross N release rates respectively, provided approximately 360 and 240 kg plant available Nha⁻¹, respectively. These estimates of N release suggest that the application rates could be halved and that sufficient N would be provided to meet crop needs and reduce leaching losses.