Variable Length Optical Packet Synchronizer

Synchronization of asynchronously arriving variable length Internet Protocol packets to a local clock is demonstrated using a fiber-based optical synchronizer. The synchronizer is a four-stage feed-forward design with a resolution of 853 ps and a dynamic tuning range of 12.8 ns. The arrival time of packets is determined on a per packet basis using a payload envelope detection technique. The synchronizer state is dynamically configured on a per packet basis determined from the arrival time. Layer-1 (bit-error-rate) measurements are presented with power penalties 0.5 dB and an input power dynamic range 15 dB. Layer-2 (packet recovery) measurements are presented with power penalties 1.5 dB.     

Introducing a Semi-Coated Model to Investigate Antibacterial Effects of Biocompatible Polymers on Titanium Surfaces

Peri-implant infections from bacterial biofilms on artificial surfaces are a common threat to all medical implants. They are a handicap for the patient and can lead to implant failure or even life-threatening complications. New implant surfaces have to be developed to reduce biofilm formation and to improve the long-term prognosis of medical implants. The aim of this study was (1) to develop a new method to test the antibacterial efficacy of implant surfaces by direct surface contact and (2) to elucidate whether an innovative antimicrobial copolymer coating of 4-vinyl-N-hexylpyridinium bromide and dimethyl(2-methacryloyloxyethyl) phosphonate (VP:DMMEP 30:70) on titanium is able to reduce the attachment of bacteria prevalent in peri-implant infections. With a new in vitro model with semi-coated titanium discs, we were able to show a dramatic reduction in the adhesion of various pathogenic bacteria (Streptococcus sanguinis, Escherichia coli, Staphylococcus aureus, Staphylococcus epidermidis), completely independently of effects caused by soluble materials. In contrast, soft tissue cells (human gingival or dermis fibroblasts) were less affected by the same coating, despite a moderate reduction in initial adhesion of gingival fibroblasts. These data confirm the hypothesis that VP:DMMEP 30:70 is a promising antibacterial copolymer that may be of use in several clinical applications.     

Advanced Mutasynthesis Studies on the Natural α‐Pyrone Antibiotic Myxopyronin from Myxococcus fulvus

Myxopyronin is a natural α‐pyrone antibiotic from the soil bacterium Myxococcus fulvus Mx f50. Myxopyronin inhibits bacterial RNA polymerase (RNAP) by binding to a part of the enzyme not targeted by the clinically used rifamycins. This mode of action makes myxopyronins promising molecules for the development of novel broad‐spectrum antibacterials. We describe the derivatization of myxopyronins by an advanced mutasynthesis approach as a first step towards this goal. Site‐directed mutagenesis of the biosynthetic machinery was used to block myxopyronin biosynthesis at different stages. The resulting mutants were fed with diverse precursors that mimic the biosynthetic intermediates to restore production. Mutasynthon incorporation and production of novel myxopyronin derivatives were analyzed by HPLC‐MS/MS. This work sets the stage for accessing numerous myxopyronin derivatives, thus significantly expanding the chemical space of f α‐pyrone antibiotics.     

Brookite Formation in TiO2?Ag Nanocomposites and Visible‐Light‐Induced Templated Growth of Ag Nanostructures in TiO2

TiO₂? Ag‐nanocomposites exhibit various desirable properties that make them suitable for a variety of applications, for example in photocatalysis and as bactericidal coatings. In this work, a new method for processing TiO₂? Ag nanocomposites is presented. The nanocomposite films are fabricated from one precursor solution with high silver loading of up to 50%. The resulting films exhibit a microstructure consisting of TiO₂? Ag_xO nanocomposites with a largely XRD‐amorphous TiO₂ matrix containing brookite nanocrystals. This specific microstructure absorbs in the visible range so that photoreduction of Ag ions can be accomplished by using visible light. The thin films can be patterned using simple shadow masks. The illuminated areas show a high density of self‐organized nanoparticles (SNPs) and nanorods (SNRs), which are templated by the TiO₂ porous network. The particle size can be tuned by varying the irradiation time. Most of the SNPs and SNRs form faceted crystals, which are mostly a combination of {111} and {110}. The application of these films as substrates for surface‐enhanced Raman scattering is shown. Enhancement factors as high as 4.6 × 10⁶ could be obtained using rhodamine 6G dye molecules. More applications should involve photocatalytic water purification using visible light.     

Crosslinking behavior of dextran modified with hydroxyethyl methacrylate upon irradiation with visible light—Effect of concentration,coinitiator type,and solvent

This study presents the synthesis of a crosslinkable dextran as starting material for the development of new hydrogels as drug delivery system in dental applications. 2‐Hydroxyethyl methacrylate (HEMA) was coupled to dextran after activation with carbonyldiimidazole as monitored by FTIR and ¹H‐NMR spectroscopy. The Dex‐HEMA was crosslinked by visible light in the presence of camphorquinone (CQ) as photoinitiator and a coinitiator in a proper solvent. Aliphatic or aromatic amines were used as coinitiators and the content of the coinitiator was varied from 0.25 to 3.0 mol %. Diphenyliodonium chloride was added as a third component to the above photoinitiation system. It was observed that, the degree of swelling decreased upon an increase of Dex‐HEMA concentration and the water content in the solvent system due to formation of more crosslinking points, that is, increasing crosslink density (P_x). The type of coinitiator shows a prominent impact on the swelling behavior and crosslinking efficiency of hydrogels. Special cryofixation and cryofracture techniques were used to investigate the surface and interior of swollen Dex‐HEMA hydrogel samples by SEM. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Controlled release of biocide from silica microparticles in wood paint

Porous microparticles represent an attractive encapsulation platform as they provide a feasible route to a wide range of encapsulated chemical compounds. This assures an increased lifetime of the encapsulated compound by protecting it from the surrounding environment as well as providing a way to control the release rate. Porous microparticles encapsulating the commonly used biocide for wood protection, 3-iodoprop-2-ynyl N-butylcarbamate (IPBC), have been synthesized. The microparticles are spherical with an average size distribution of roughly 1 μm as determined by scanning electron microscopy (SEM). Determination of the release rate of the biocide from microcapsules incorporated into the paint film has been performed under diluted conditions. These experiments show that a slower release of the biocide can be obtained by encapsulation. Additionally, the microparticles have been shown to prolong the biocidal effect of the fungicide under accelerated weathering tests by protecting the biocide from UV-induced chemical degradation.     

Conjugated‐Polymer‐Based Lateral Heterostructures Defined by High‐Resolution Photolithography

Solution processing of polymer semiconductors provides a new paradigm for large‐area electronics manufacturing on flexible substrates, but it also severely restricts the realization of interesting advanced device architectures, such as lateral heterostructures with defined interfaces, which are easily accessible with inorganic materials using photolithography. This is because polymer semiconductors degrade, swell, or dissolve during conventional photoresist processing. Here a versatile, high‐resolution photolithographic method is demonstrated for patterning of polymer semiconductors and exemplify this with high‐performance p‐type and n‐type field‐effect transistors (FETs) in both bottom‐ and top‐gate architectures, as well as ambipolar light‐emitting field‐effect transistors (LEFETs), in which the recombination zone can be pinned at a photolithographically defined lateral heterojunction between two semiconducting polymers. The technique therefore enables the realization of a broad range of novel device architectures while retaining optimum materials performance.     

Contaminants, diet, plasma fatty acids and smoking in Greenland 1999-2005

OBJECTIVES: The purpose of this study is to monitor and assess human exposure to pollution in the Arctic which presents a potential future health risk for the local populations. Epidemiological studies in Greenland have shown that human blood levels of several organic contaminants are very high, especially in the North where people depend on local food. In East Greenland (Ittoqqortoormiit (Scoresbysund)) the population shows the highest blood levels of several persistent organic pollutants found in Arctic countries, especially PCB, the levels of which exceed Canadian guideline levels. As in other Arctic countries, the predominant source of these contaminants is the local diet. However, other factors such as smoking may influence the metabolism and thereby the accumulation of toxic substances. STUDY DESIGN: This project is part of the human health program of the ongoing circumpolar "Artic Monitoring and Assessment Programme". Lifestyle, anthropometric factors, and dietary survey results covering 500 men and women from 6 Greenlandic districts were analyzed along with other factors blood lipids, fatty acid profiles, heavy metals and concentrations of persistent organic pollutants (POPs). RESULTS: The dietary survey showed that the traditional food on the average provided 20-30% of the total energy intake. However, the relative monthly meal intake of seal, whale, polar bear, fish and game, and the composition of imported food, varied between districts. Seal and polar bear intake, and, in particular all the plasma n-3 fatty acids, were significantly correlated with organic contaminant concentrations, (betaHCH, chlordanes, DDTs, Hexachlorobenzene, Mirex, PCBs, and toxaphenes) p<0.01(). After adjusting for age, district, dietary factors or plasma n-3 fatty acids, smoking was significantly correlated with high levels of all the above mentioned POPs. CONCLUSION: The main predictors of high contaminant levels in Greenland were age, district, male gender, smoking and high plasma n-3/n-6 ratio as a marker of high dietary intake of local marine mammals.     

Building-related symptoms and inflammatory potency of dust from office buildings

The aim was to investigate the association between building-related symptoms (BRS) in office buildings and the inflammatory potency of dust (PD). Furthermore, the association between dust potency and various building characteristics was investigated. Occupants of 22 office buildings received a retrospective questionnaire about BRS (2301 respondents). Dust was collected from groups of offices and building characteristics were recorded. The potency of a dust sample to induce interleukin-8 (IL-8) secretion from the lung epithelial cell line A549 was measured as the slope of the initial linear part of the concentration-response curve. Symptoms of the central nervous system (CNS) were associated with the potency of surface dust (OR = 1.4). This association may be due to an association between an index of CNS symptoms and dust potency in offices of 1-6 occupants (OR = 1.5). No single symptoms correlated with the potency of surface dust. The PD was not related to single building factors. The inflammatory PD may be used as an integrated proxy measure of biologically active compounds in dust, reflecting health relevant properties of the dust. PRACTICAL IMPLICATIONS: The potency of surface dust may be used as a crude measurement of the chemical and biological exposures present in the building, and being associated with the development of central nervous system symptoms. However, additional research is needed to establish the predictive value of the potency of surface dust.     

Critical review of methods for risk ranking of food-related hazards,based on risks for human health

This study aimed to critically review methods for ranking risks related to food safety and dietary hazards on the basis of their anticipated human health impacts. A literature review was performed to identify and characterize methods for risk ranking from the fields of food, environmental science and socio-economic sciences. The review used a predefined search protocol, and covered the bibliographic databases Scopus, CAB Abstracts, Web of Sciences, and PubMed over the period 1993–2013.

All references deemed relevant, on the basis of predefined evaluation criteria, were included in the review, and the risk ranking method characterized. The methods were then clustered—based on their characteristics—into eleven method categories. These categories included: risk assessment, comparative risk assessment, risk ratio method, scoring method, cost of illness, health adjusted life years (HALY), multi-criteria decision analysis, risk matrix, flow charts/decision trees, stated preference techniques and expert synthesis. Method categories were described by their characteristics, weaknesses and strengths, data resources, and fields of applications.

It was concluded there is no single best method for risk ranking. The method to be used should be selected on the basis of risk manager/assessor requirements, data availability, and the characteristics of the method. Recommendations for future use and application are provided.