Carbon nanowalls deposited by inductively coupled plasma enhanced chemical vapor deposition using aluminum acetylacetonate as precursor

Well aligned carbon nanowalls, a few nanometers thick, were fabricated by continuous flow of aluminum acetylacetonate (Al(acac)₃) without a catalyst, and independent of substrate material. The nanowalls were grown on Si, and steel substrates using inductively coupled plasma-enhanced chemical vapor deposition. Deposition parameters like flow of argon gas and substrate temperature were correlated with the growth of carbon nanowalls. For a high flow of argon carrier gas, an increased amount of aluminum in the film and a reduced lateral size of the carbon walls were found. The aluminum is present inside the carbon nanowall matrix in the form of well crystallized nanosized Al₄C₃ precipitates.     

Simultaneous determination of daidzein, equol, genistein and bisphenol A in human urine by a fast and simple method using SPE and GC-MS

Human diet contains weakly estrogenic compounds such as daidzein (DAI) and genistein (GEN), phytoestrogens present in soy and many vegetables as well as bisphenol A (BPA), a contaminant from packing materials and plastic containers for foods and beverages. In light of concerns about hormonally active agents, biomonitoring methods are needed to assess human exposure to such compounds. A method for simultaneous determination of DAI, its metabolite equol (EQ), GEN, and BPA by GC-MS analysis was established, validated and applied to measure concentrations in human urine. Sample preparation involves enzymatic conjugate cleavage, SPE and derivatization by silylation. For GC/MS analysis, deuterated DAI and GEN and( 13)C-BPA are used as internal standards. LOD are 4, 4, 5 and 3 ng/mL urine for DAI, EQ, GEN and BPA, respectively. Interassay variations were 9% for DAI, 15% for EQ, 18% for GEN and 10% for BPA. Simple workup and accuracy of the method are suited for biomonitoring. An analysis of urine samples from 15 adults consuming typical German food revealed dietary exposure to phytoestrogens in all samples: GEN concentrations ranged between 13 and 238 ng/mL, those for DAI ranged from 12 to 356 ng/mL. More than half of the individuals excreted also the more estrogenic metabolite EQ, at levels of 8-128 ng/mL. Higher concentrations (GEN: 820, DAI: 960 and EQ: 1740 ng/mL) were measured in a 24 h urine sample upon ingestion of soy protein (50 g with 12.9 mg DAI and 25.2 mg GEN). Only urine collected after some days on strict phytoestrogen-free diet had undetectable isoflavone levels. BPA was detected in 9 of 15 urine samples ranging from 3 to 11 ng/mL, and at 55 ng/mL in one sample. In conclusion, a reliable method to determine BPA and isoflavones in urine was established and applied in a pilot study: Biomonitoring results show much higher dietary exposure to phytoestrogens than to BPA in German adults.     

Development of a qualitative test method for the cleanability of polymer woven filter media

In this paper a new method for cleaning of filter media is presented, and the cleanability with different textures and surface finishes is compared. With the method described, it is possible to evaluate the quality of the cleaning process. According to the German VDMA standard cleaning test, riboflavin and malt extract are applied as model contaminants for evaluation of the cleaning results. To compare the cleanability of filter media with different properties and geometries the results are adapted to the law of mass transfer and to the Sherwood number, a dimensionless parameter describing the quality of a cleaning process.     

Preparative Protein Crystallization

Preparative protein crystallization can possibly replace one or more chromatographic steps in downstream processing. The development of such crystallization processes is demanding: first, promising principal crystallization conditions must be identified; second, details about the process must be defined; and third, the crystals have to be separated from the mother liquor without putting harm of their crystalline integrity. State‐of‐the‐art about these three steps is developing fast by (i) employing new screening methods which are based on fundamental understanding of the interaction of the protein molecules, (ii) application of existing concepts of technical bulk crystallization of small molecules to preparative protein crystallization, and (iii) making available specific gentle separation machinery.     

Cervid Prion Protein Polymorphisms: Role in Chronic Wasting Disease Pathogenesis

Chronic wasting disease (CWD) is a prion disease found in both free-ranging and farmed cervids. Susceptibility of these animals to CWD is governed by various exogenous and endogenous factors. Past studies have demonstrated that polymorphisms within the prion protein (PrP) sequence itself affect an animal’s susceptibility to CWD. PrP polymorphisms can modulate CWD pathogenesis in two ways: the ability of the endogenous prion protein (PrP^C) to convert into infectious prions (PrP^Sc) or it can give rise to novel prion strains. In vivo studies in susceptible cervids, complemented by studies in transgenic mice expressing the corresponding cervid PrP sequence, show that each polymorphism has distinct effects on both PrP^C and PrP^Sc. It is not entirely clear how these polymorphisms are responsible for these effects, but in vitro studies suggest they play a role in modifying PrP epitopes crucial for PrP^C to PrP^Sc conversion and determining PrP^C stability. PrP polymorphisms are unique to one or two cervid species and most confer a certain degree of reduced susceptibility to CWD. However, to date, there are no reports of polymorphic cervid PrP alleles providing absolute resistance to CWD. Studies on polymorphisms have focused on those found in CWD-endemic areas, with the hope that understanding the role of an animal’s genetics in CWD can help to predict, contain, or prevent transmission of CWD.     

Evaluation of real-time PCR results at the limit of detection

Real-time polymerase chain reaction (real-time PCR) facilitates to detect DNA fragments at very low copy numbers. Positive results, e.g. for unauthorized genetically modified organism (GMO) contamination or for allergens, may raise safety concerns and have far-reaching consequences. However, in case of very low concentrations of DNA samples, results for the same product lot or even for identical samples from different laboratories may differ. Therefore, an approach for a standardized interpretation and reporting of results obtained by real-time PCR at the limit of detection (LOD) is proposed. A quality control DNA sample containing the target at the LOD (95?%) is analysed in parallel with the real DNA sample and the respective C _T values are compared. In addition, practical approaches for in house and precision-based estimation of the LOD are presented. The proposed approach may also contribute to the current discussion on implementing a technical solution to handle DNA traces in specimen, e.g. for the detection of unauthorized GMO.     

High-tensile bolts without heat treatment

According to DIN-ISO 898-1 high tensile bolts of class 8.8 must have a quenched and tempered structure. Therefore either quenched and tempered wire rod is used for cold heading or the bolts are quenched and tempered after the bolt forming process. This paper presents a new wire rod, which offers the chance to get comparable or even better final properties and lower production costs: a low-carbon MnSi wire rod is used as basic material. The final tensile strength is produced by drawing and cold forming. The conventional final quenching and tempering is omitted and for many cases also baking can be avoided. An increased fatigue resistance and the elimination of final straightening of the bolts are additional advantages of the new process.