Metal-Coated <100>-Cut GaAs Coupled to Tapered Parallel-Plate Waveguide for Cherenkov-Phase-Matched Terahertz Detection: Influence of Crystal Thickness

The influence of crystal thickness of metal-coated <100>-cut GaAs (M-G-M) on Cherenkov-phase-matched terahertz (THz) pulse detection was studied. The M-G-M detectors were utilized in conjunction with a metallic tapered parallel-plate waveguide (TPPWG). Polarization-sensitive measurements were carried out to exemplify the efficacy of GaAs in detecting transverse magnetic (TM)- and transverse electric (TE)-polarized THz waves. The reduction of GaAs’ thickness increased the THz amplitude spectra of the detected TM-polarized THz electro-optic (EO) signal due to enhanced electric field associated with a more tightly-focused and well-concentrated THz radiation on the thinner M-G-M. The higher-fluence THz beam coupled to the thinner M-G-M improved the integrated intensity of the detected THz amplitude spectrum. This trend was not observed for TE-polarized THz waves, wherein the integrated intensities were almost comparable. Nevertheless, good agreement of spectral line shapes of the superposed TM- and TE-polarized THz-EO signals with that of elliptically polarized THz-EO signal demonstrates excellent polarization-resolved detection capabilities of M-G-M via Cherenkov-phase-matched EO sampling technique.     

IGCC系统关键部件的选择及其对电厂整体性能的影响——(3)气化炉合成气冷却器与余热锅炉的匹配

带有合成气冷却器的气化炉,因能将高温合成气中的显热提供给余热锅炉,其系统效率高且更具有研究价值．采用GT PRO软件,研究了余热锅炉和合成气冷却器联合运行的工作过程．模拟和对比了余热锅炉在不同位置抽取和回送冷却介质对系统整体技术、经济性能造成的影响．综合分析之后,提出了几种性价比较高的流程布置．     

Motion of an antiviral compound in a rhinovirus capsid under rotational symmetry boundary conditions

A molecular dynamics (MD) simulation of a complex of a rhinovirus protein shell referred to as a "capsid" and an anti-rhinovirus drug, WIN52084s, was performed under the rotational symmetry boundary conditions. For the simulation, the energy parameters of WIN52084s in all-atom approximations were determined by ab initio calculations using a 6-31G* basis set and the two-conformational two-stage restricted electrostatic potential fit method. The motion of WIN52084s and the capsid was focused on in the analysis of the trajectory of the simulation. The root mean square deviations of WIN52084s from the X-ray structure were decomposed to conformational, translational, and rotational components. The translation was further decomposed to radial, longitudinal, and lateral components. The conformation of WIN52084s was rigid, but moving in the pocket. The easiest path of motion for WlN52084s was on the longitudinal line, providing a track for the binding process required of the anti-rhinovirus drug to enter the pocket. The conformation of the pocket was also preserved in the simulation, although the position of the pocket in the capsid fluctuated in the lateral and radial directions.     

Comparison of the lymphatic transport of radiolabeled 1,3-dioleoylglycerol and trioleoylglycerol in rats

It has been reported that, compared with TAG, DAG suppresses postprandial hypertriacylglycerolemia and reduces visceral fat levels in experimental animals and humans. To clarify the mechanism responsible for these beneficial effects, we compared the lymphatic transport of 1,3-DAG, a major isomer of DAG, and TAG in rats. Male SD rats, after insertion of a cannula into the thoracic duct, were given 1,3-di[1-¹⁴C]oleoylglycerol or tri[1-¹⁴C]oleoylglycerol via a stomach tube. The 24-h receovery of the radioactivity from 1,3-di[¹⁴C]oleoylglycerol in the lymph was slightly but significantly lower than that from tri[¹⁴C]oleoylglycerol (81.3±1.0 vs. 86.5±1.2%, respectively). However, in the first 1-h interval after administration, the recovery of radioactivity from 1,3-dioleoylglycerol was almost half of that from trioleoylglycerol (17.5±2.0 vs. 31.1±1.4%). The amount of TAG and phospholipids secreted into the lymph was significantly lower 1 h after the administration of 1,3-dioleoylglycerol compared with that after the administration of trioleoylglycerol. More than 90% of the radioactivity recovered in the lymph in the first 3 h was distributed in the TAG fraction for both 1,3-dioleoylglycerol and trioleoylglycerol. These results suggest that slower lymphatic transport of 1,3-DAG compared with TAG could be a factor in the suppression of postprandial hypertriacylglycerolemia. The possibility that the slower lymphatic transport of DAG contributes to the antiobesity action observed in the feeding of 1,3-DAG cannot be excluded.     

Specific heat anomaly of nonstoichiometric U4O9−y

A λ-type specific heat anomaly of U₄O_9?y, which occurs slightly above room temperature, was measured for the samples with different O/U ratios. The transition temperatures obtained from the peak of λ-type specific heat anomaly are in fairly good agreement with the data by X-ray diffraction and electrical conductivity measurements. The entropy increment for the transition was obtained to be 0.46 e.u. for UO_2.250, 0.56 e.u. for UO_2.240 and 0.70 e.u. for UO_2.228, depending on O/U ratio. On the basis of the entropy change with O/U ratio, the mechanism of the phase transition is discussed. The entropy change due to the phase transition is mainly divided into two terms: one is due to the order-disorder rearrangement of U(IV) and U(V) ions,the other is associated with the displacement of oxygens ions. The former term is estimated to be rather smaller than the entropy change calculated by the Bragg-Williams approximation, and the latter is calculated using the X-ray diffraction data with the assumption of the Willis model.     

Preparation of SrBi 2 Ta 2 O 9 Thin Films by Liquid-Delivery MOCVD Without Additional Solvents

SrBi 2 Ta 2 O 9 thin films were prepared by ECR plasma enhanced metalorganic chemical vapor deposition (ECR-MOCVD) with a liquid-delivery system using one cocktail source without an additional solvent. The strontium-tantalum double alkoxide, Sr{Ta[OC 2 H 4 H(CH 3 ) 2 ](OC 2 H 5 ) 5 } 2 , was dissolved in stabilized trimethyl bismuth, Bi(CH 3 ) 3 / dioxane. This source system has been used in a conventional bubbling system. Deposition rate and the composition of the films were strictly controlled by the concentration and the composition of the cocktail source. Therefore, high reproducibility was realized by using this system. The constituent phase of the stoichiometric SBT film as-deposited at 500 C on a (111)Pt/TiO 2 /SiO 2 /Si substrate was a fluorite phase and transformed to the single phase of SBT by the post annealing at 800 C. It showed almost the same ferroelectricity as the stoichiometric composition film.     

Control and performance of a zero‐current‐switched,three‐phase PWM inverter equipped with resonant circuits on the ac side

This paper presents a zero‐current‐switched voltage‐fed inverter equipped with resonant circuits on the ac side. The current flowing through a switching device, that is, IGBT, is the sum of the load current and the resonant current. When the amplitude of the resonant current is larger than that of the load current, the current in the switching device becomes zero at an instant in each resonant cycle. This allows the switching device to be turned on or off at the zero current. The zero‐current switching makes a significant contribution to reduction of switching losses and electromagnetic noises. In this paper, the principle of zero‐current‐switching operation, along with a novel control scheme, is described from a theoretical and practical point of view. Experimental results obtained from a laboratory system of 5 kVA verify the practicability. Moreover, the switching and conduction losses of the proposed soft‐switched inverter are compared with those of a conventional hard‐switched inverter. © 2000 Scripta Technica, Electr Eng Jpn, 131(4): 85–95, 2000     

Experimental verification of the effect of a voltage‐detection‐based shunt active filter for harmonic damping throughout a power distribution line

This paper is focused on a voltage‐detection‐based shunt active filter for installation on a power distribution system. A main objective of the active filter is to achieve damping of harmonic propagation coming from series/parallel resonance between capacitors for power factor correction and line inductors in the distribution system. The active filter installed at the end terminal of a distribution feeder is controlled in such a way as to present infinite impedance to the external circuit for the fundamental frequency, and to exhibit low resistance for harmonic frequencies. As a result, the active filter acts as a damping resistor for the harmonic propagation, like a 50‐Ω terminator installed at the end of a signal transmission line. It is verified by experiment that the active filter intended for harmonic termination has the capability of harmonic damping throughout the distribution feeder. © 2000 Scripta Technica, Electr Eng Jpn, 133(2): 1–10, 2000     

Quantum Monte Carlo Device Simulation of Nano-Scaled SOI-MOSFETs

Quantum transport properties of nano-scaled SOI-MOSFETs are investigated based on a quantum Monte Carlo (MC) device simulation. The quantum mechanical effects are incorporated in terms of a quantum correction of potential in the well-developed particle MC computational techniques. The ellipsoidal multi-valleys of silicon conduction band are also considered in the simulation. First, the validity of the quantum MC technique is verified by comparing the simulated results with a self-consistent Schrödinger-Poisson solution at thermal equilibrium. Then, we apply the technique to non-equilibrium and quasi-ballistic quantum transport in nano-scaled SOI-MOSFETs.     

Predicting the Life Span of Dies Used for Soft Magnetic Core Motors

This paper describes a method of predicting the life span of the dies used in motor manufacture from soft magnetic composites (SMCs). In the present study, a clawtooth motor was used. The method involves performing a stress analysis of a die followed by fatigue testing of test pieces. In the analysis, the SMC was assumed to be in powder form and its yield function was derived by a simple method. In addition to the analysis, we describe a simpler and more effective method in which the properties of the SMC are treated as boundary conditions. In the fatigue tests, we used test pieces that simulated the shape and construction material of the die. To predict the life span of the die, we evaluate the SN diagram, which represents the relationship between the maximum stress and fatigue life with respect to the stress generated in the die. The life expectancy of a new die, which is about 100 cycles of use, is found to agree substantially with its actual life. Furthermore, we explain how to extend the life span of a die to the targeted life span, namely, more than 200,000 cycles of use, by changing its shape to reduce stress.