Selection of parameters in the design of real-time spectral analysis

A new analytical method with high speed processing in the time-frequency domain is presented. In this method, sine and cosine waves with an established frequency and multiple periods are used, and we call these waves “cutting-out waves.” We all the frequency the “established frequency,” and we call the number of periods of the cutting-out wave the “number of periods.” The inner product of the cutting-out wave and the signal are calculated, and a signal element with a frequency near the established frequency is detected. We call the unit that detects the signal element an “auditory cell.” There are many auditory cells, and they have an established frequency which differs very little. The design of this method is the arrangement of the auditory cells. There are three parameters in the design, and these parameters are a sampling frequency, the number of periods, and the increasing rate of the established frequencies. In this article, we show the selection of these parameters.     

A coaxial pulsed plasma thruster using chemical propellants

Pulsed plasma thrusters (PPTs) have the advantages of mechanical simplicity and robustness compared to other electric propulsion systems. However the thrust power ratio of PPTs is lower than that of other electric propulsion systems. To enhance the thrust performance of the PPT, we propose to use several combustible solid chemicals as coaxial PPT propellants to replace Teflon^® (Polytetrafluoroethylene: PTFE). With the design, the force obtained thermodynamically is expected to augment the PPT thrust power ratio with the help of the chemical energy contained in the propellants. As a result, the thrust power ratio is increased using hydroxyl-terminated polybutadiene-ammonium perchlorate (HTPB-AP)-based propellants compared to the case of ordinary Teflon. The discharge current and voltage waveform does not change even when the propellant is changed. These findings could indicate that the impulse bits by gasdynamic contribution are lager in the case of chemical solid propellants than in the case of Teflon.     

Effect of heparin on high glucose induced proliferation and expression of matrix metalloproteinases in normal human mesangial cells

Background The pathogenesis of diabetic nephropathy (DN) is a complex pathophysiological process. Its precise mechanism is not fully known. In recent years it has been recognized that synthesis of various extracelluar matrix (ECM) components may increase, and that degradation of ECM may decrease in DN. It was reported heparin could inhibit mesangial cells proliferation in vitro. The main aim of this study is to explore whether heparin inhibits proliferation of mesangial cells grown in high glucose concentration and to measure the effect of heparin on matrix metalloproteinases (MMPs) expression in mesangial cells. Methods The medium contained either low glucose (5 mmol/L) or high glucose (25 mmol/L). The concentrations of heparin in the culture medium were 0, 25, 50, 100, 200 or 400 μg/mL. A metabolic (WST-1) assay was used to measure mesangial cell proliferation and Western blot analysis was used to measure MMPs expression of mesangial cells. Results Normal human mesangial cell (NHMC) proliferation was higher in high glucose (HG) medium than in low glucose (LG) medium. They showed a 1.93 fold expansion after 72 h in high glucose in contrast to a 1.63 fold expansion in low glucose. In the presence of heparin, mesangial cells proliferation was inhibited, which was more obvious at high glucose concentrations than at low glucose concentrations. In high glucose, with heparin concentration of 50, 100, 200 and 400 μg/mL, the mesangial cells showed a 0.61 fold, 0.52 fold, 0.52 fold and 0.41 fold reductions in cell number compared to cells grown without heparin. In low glucose, only concentrations of 200 μg/mL and 400 μg/mL showed reduction in cell number, namely 0.54 fold and 0.45 fold, when compared to cells grown without heparin. In Western blot analysis, MMP₁, MMP₂, MMP₃ and MMP₉ was expressed by mesangial cells expressed in both high and low glucose concentrations, which was more prominent in high glucose medium. Incubation of heparin further increased expression of MMP₁, MMP₂, MMP₃ and MMP₉. Conclusions This study suggests that glucose can accelerate mesangial cell proliferation while heparin can reduce proliferation, being more obvious at high glucose concentrations. Higher glucose concentrations led to increased MMP expression, which may take part in the regulation of mesangial matrix synthesis and degradation. Addition of heparin resulted in a corresponding increase in MMP expression, most notably at high glucose concentrations, indicating a potentially renoprotective role in DN. Foundation item: Project (30370663) supported by the National Natural Science Foundation of China     

Microstructure and yield strength of UDIMET 720LI alloyed with Co-16.9 Wt Pct Ti

We proposed a new method for developing Ni-base turbine disc alloy for application at temperatures above 700 °C by mixing a Ni-base superalloy U720LI with a two-phase alloy Co-16.9 wt pct Ti in various contents. The microstructure and phase stability of the alloys were analyzed using an optical microscope, a scanning electron microscope, energy-dispersive spectroscopy, and an X-ray diffractometer. The yield strength was studied by compression tests at temperatures ranging from 25 °C to 1200 °C. The results show that all the alloys had a dendritic structure. Ni₃Ti (η) phase was formed in the interdendritic region in the alloys with the addition of Co-16.9 wt pct Ti, and its volume fraction increased with the increase in the addition of Co-16.9 wt pct Ti. The results of exposure at 750 °C show that the addition of Co-16.9 wt pct Ti to U720LI had a great effect on suppressing the formation of σ phase due to the reduced Cr content in the γ matrix. Compared to U720LI, the alloys with the addition of Co-16.9 wt pct Ti possessed higher yield strength. The solid-solution strengthening of γ and γ′ and higher volume fraction of γ′ were assumed to cause this strength increase.     

Partial phase relationships in Ir-Nb-Ni-Al and Ir-Nb-Pt-Al quaternary systems and mechanical properties of their alloys

Two quanternary systems, Ir-Nb-Ni-Al and Ir-Nb-Pt-Al, were successively investigated to assess their possible use in ultra-high-temperature applications. The phase relationships concentrated on the fcc/L1₂ two-phase region were primarily established, and the mechanical properties were studied. Ir-Nb-Ni-Al quaternary alloys around the Ir-rich or Ni-rich corners of the Ir-Nb-Ni-Al tetrahedron showed a coherent fcc/L1₂ two-phase structure, analogous to that of Ni-base superalloys; however, most of the alloys presented three or four phases with two types of L1₂ phases. Although these alloys showed a high compressive strength at high temperature, they exhibited a higher creep rate than Ir-base binary and ternary alloys. Another quanternary system, Ir-Nb-Pt-Al, showed promising results. Only an fcc/L1₂ two-phase structure was found in all the alloys investigated with compositions ranging from the Ir-rich side to the Pt-rich side, and the lattice misfit between the fcc and L1₂ phases was small. The high-temperature strength at 1200 °C of Ir-Nb-Pt-Al alloys was higher than that of Ir-Nb-Ni-Al alloys with the same Ir content (at. pct). Moreover, Ir-Nb-Pt-Al alloys exhibited excellent creep resistance at 1400 °C and 100 MPa. This article is based on a presentation made in the symposium entitled “Beyond Nickel-Base Superalloys,” which took place March 14–18, 2004, at the TMS Spring meeting in Charlotte, NC, under the auspices of the SMD-Corrosion and Environmental Effects Committee, the SMD-High Temperature Alloys Committee, the SMD-Mechanical Behavior of Materials Committee, and the SMD-Refractory Metals Committee.     

Compressive creep properties of Ir-base refractory superalloys

Ir-base alloys with the fcc and L1₂-Ir₃X (X = Nb, Zr) two-phase structure have been developed as next-generation high-temperature materials. The compressive creep behavior of Ir-Nb and Ir-Zr alloys was investigated at 2073 K under 137 MPa. The effect of addition of the third element, Zr, on the creep behavior of an Ir-Nb alloy was also investigated at 2073 K for 137 MPa. The creep rate became two orders lower by addition of a small amount of Zr. The lattice misfit change between the fcc and L1₂ two phase by addition of Zr and the deformation structure in binary and ternary alloys after a creep test were also investigated. The creep behavior is discussed in terms of the lattice misfit, precipitate shape, and their distribution. This article is based on a presentation made in the symposium entitled “Beyond Nickel-Base Superalloys,” which took place March 14–18, 2004, at the TMS Spring meeting in Charlotte, NC, under the auspices of the SMD-Corrosion and Environmental Effects Committee, the SMD-High Temperature Alloys Committee, the SMD-Mechanical Behavior of Materials Committee, and the SMD-Refractory Metals Committee.     

Using selective precipitant for uranyl ions — Fundamental studies for evaluating the precipitant performance

We have developed a simple reprocessing process for spent FBR fuels using N-cyclohexyl-2-pyrrolidone (NCP) which has selective precipitation ability for UO₂²⁺ ions. It was confirmed that NCP has sufficient precipitation ability for UO₂²⁺ ions, decontamination capability (separation of UO₂²⁺ from simulated fission products), and resistance to γ-ray radiation in nitric acid solutions. These findings indicate that NCP is applicable to our reprocessing process. We have also evaluated performances of other precipitants such as N-n-propyl-2-pyrrolidone (NProP), N-n-butyl-2-pyrrolidone (NBP), and N-n-butyl-2-pyridone (NBPyr). It was found that higher decontamination factors (DFs) are obtained by using NProP and NBP. This can be interpreted that the hydrophobicity of NProP and NBP is lower than that of NCP. Furthermore, we have obtained an experimental result that the resistance of NBPyr to γ-ray radiation is superior to that of NCP.     

Phase Diagram of Hydrogen in Palladium

Hydrogen in palladium, Pd-H(D), is an interesting system because of the highly mobile hydrogen and the presence of a phase boundary below 100 K. Experimentally, however, the nature of this transition has not been established. Historically this transition around 55 to 100 K has been thought to be an order-disorder transition. Such a transition would produce a phase boundary with anomalies at specific hydrogen concentrations corresponding to the specific ordered structures. In order to check this phase boundary we have performed a detailed study of the hydrogen concentration dependence of the specific heat of PdH _x over the temperature range from below 0.5 K to above 100 K using PdH _x specimens with x up to 0.8753. The measured heat capacity has been analyzed as the sum of contributions due to the lattice specific heat of Pd, the electronic specific heat of PdH _x , and the excess contribution caused by hydrogenation of the specimen. The excess specific heat result shows a sharp peak which indicates a phase boundary with transition temperature T ₁=55 K to 85 K depending linearly on the hydrogen concentration from x=0.6572 to 0.8753. We do not observe anomalies at specific x values as would be expected for the specific ordered structures.