Production of anatoxin-a and a novel biosynthetic precursor by the cyanobacterium Aphanizomenon issatschenkoi

Cyanobacterial blooms in New Zealand surface water resources have been surveyed and, in response to strict new standards for drinking water, more intensive monitoring for cyanotoxins has been initiated. Aphanizomenon issatschenkoi was recently identified in a New Zealand lake and was found to produce the potent neurotoxin anatoxin-a (ATX). A strain of Aph. issatschenkoi (CAWBG02) was cultured for ATX production and a novel derivative of ATX was found to account for a high proportion of the toxin content in the Aph. issatschenkoi cells. Spectroscopic data (LC-UV, liquid chromatography with ultraviolet absorption detection; LC-MS/MS, liquid chromatography with tandem mass spectrometry; LC-HRMS, liquid chromatography with high resolution mass spectrometry) identified this derivative as 11-carboxyl anatoxin-a. Although precursors with a carboxyl group on C11 have been postulated in the biosynthetic pathway for ATX from amino acids and acetate, this is the first identification of a specific intermediate. The production of ATX and the intermediate by Aph. issatschenkoi was studied under different growth conditions. Concentrations of ATX and the intermediate increased in the aerated culture to 170 microg/L and 330 microg/L, respectively, at 21 days (18 x 10(9) cells/L). Cell concentrations did not markedly increase during subsequent growth to 37 days. ATX concentrations decreased, and 11-carboxyl ATX concentrations continued to increase during this period. Toxin production by Aph. issatschenkoi cells was maximal at 6 days of growth (0.08-0.09 pg/cell each; 2.3 x 10(8) cells/L). Other ATX analogues and metabolites were not detected in the cultures. Freeze-thawing of cultures resulted in complete conversion of the intermediate to ATX with a half-life of 5 min, and this conversion was inhibited by acidification, heating of the culture to 100 degrees C, or addition of methanol. The implications of the findings for mechanisms of biosynthesis of anatoxins by cyanobacteria and for monitoring of water bodies for cyanotoxins are discussed.     

LDMOSFET with drain potential suppression for 100 V Power IC technology

A standard 0.35 micrometer CMOS technology has been extended for 100 V Power IC applications by accommodating reduced surface field (RESURF) LDMOSFET device with p-well block region or extended poly-overlap region for suppression of the drain wrapping potential. A 100 V integrated H-bridge circuit suitable for driving a brushless DC motor has been designed, manufactured and tested to prove the technology. To streamline the design and integration of this power device 2D and 3D simulations have been performed. Different electrical isolation schemes to provide technology compartmentalization have also been investigated experimentally and results are discussed.     

Serine metabolism in Lactobacillus plantarum

This study investigated the metabolism of (L-) serine by Lactobacillus plantarum B3089 isolated from cheese. Serine was deaminated by growing cells to ammonia with the corresponding formation of acetate and formate. Serine was also deaminated by non-growing cells to ammonia but with the formation of acetate only (no production of formate). Phosphoserine and threonine were not catabolised. It is proposed that serine was deaminated by serine dehydratase (deaminase) to ammonia and pyruvate. Pyruvate was further catabolised predominantly to acetate, carbon dioxide and formate in growing cells, catalysed by pyruvate-formate lyase and pyruvate oxidase; some of the pyruvate was converted to acetoin. In non-growing cells, however, pyruvate-formate lyase was inactive and pyruvate oxidase degraded the pyruvate to acetate and carbon dioxide. Serine dehydratase activity could not be detected in cell-free extracts, presumably because of enzyme instability. The growth of L. plantarum was neither enhanced nor stimulated by serine under the current conditions. Whereas there was little difference in serine utilisation between pH 7.0 and pH 5.8, serine utilisation was decreased by 30% at pH 5.0. NaCl of up to 4% (w/v) concentration had little effect on serine utilisation. Serine had no impact on lactose metabolism. Lactose was fermented mainly to lactate (73%) with the remainder converted to an unidentified polysaccharide (27%).     

Total Antioxidative Capacity and Total Phenolic Levels in Pomegranate Husks Correlate to Several Postharvest Fruit Quality Parameters

The demand to extend the marketing period of pomegranates requires a better understanding of the processes occurring during postharvest storage. Among the important factors that limit the long-term storage of pomegranates are disorders occurring on the fruit husk: fungal decay, chilling injury, shrinkage due to weight loss, and husk scald, all leading to loss of visual quality. The aim of this study was to examine processes that taking place during storage, and to analyze the relationship between the total antioxidant capacity and total phenolics content of the husks and the development of husk disorders in seven accessions. While the level of total phenolics increased during storage, concomitantly with the color index, the level of punicalagin, the main polyphenol in the husks with the highest antioxidant activity, declined during storage. The content of titratable acidity was also reduced. Regression analysis indicates that fruit having a high antioxidant capacity, high total phenolics content, and high levels of punicalin in their husks have a better ability to resist fungal decay and weight loss, in addition to being less sensitive to husk scald. On the other hand, the results suggest that the development of most husk disorders is not correlated to the content of total soluble solids, titratable acidity, punicalagin, anthocyanin, or husk color. Nonetheless, poorly colored accessions were relatively more sensitive to chilling injury expressed as surface pitting, compared with the more colored accessions. The appearance of these chilling injury symptoms was not correlated to total phenolics or the antioxidant capacity.     

A comparison of pendulum experiments and discrete-element simulations of oblique collisions of wet spheres

Oblique collisions of two spherical particles coated with a thin layer of viscous liquid are considered. Experimental measurements are performed using particle tracking velocimetry and the results are compared to viscous force and capillary force models via numerical simulation using the discrete-element method. Comprehensive experimental data for collisions with an impact angle between 0° and 60° are presented to ensure future models can be rigorously validated. Collisions are characterized by the normal Stokes' number (a dimensionless ratio of normal inertial forces to normal viscous forces), and the normal coefficient of restitution (a dimensionless ratio of postcollisional normal velocity to precollisional normal velocity). Good agreement was found between the models and the experiments at high Stokes' number, where the models are dominated by the normal components. As the tangential forces become more significant (i.e., at low to medium Stokes' number, and high collision angle), agreement between the simulations and experiments is poorer. Furthermore, the models predict a decreasing rotational velocity with increasing Stokes' number past some critical Stokes' number. A coefficient of friction term was implemented and found to improve agreement for the rotational velocity postcollision.     

Characterization of unsteady flow in a 3D-printed Schwarz Diamond monolith using magnetic resonance velocimetry

Process engineering applications such as heat transfer, reactions, and separations involve passing fluid through a porous medium. Historically, random-channel porous media have been used for these operations. Such systems do not represent optimal configurations for process performance because of poor flow distribution and high-pressure drop. It is now possible to fabricate porous monoliths with tailored morphology and regular channel structure using 3D-printing. In this work, we use magnetic resonance imaging to study flow through a Schwarz Diamond triply periodic minimal surface (TPMS) monolith for Reynolds numbers up to 350. A transition to unsteady flow was observed experimentally for the first time. The channel structure diverts flow such that free shear layers form in the channel centers that contribute to flow instability. These measurements serve to inform the design of novel transport processes with enhanced performance.     

Population connectivity of aquatic insects in a dam-regulated,desert river

Humans have exaggerated natural habitat fragmentation, negatively impacting species dispersal and reducing population connectivity. Habitat fragmentation can be especially detrimental in freshwater populations, whose dispersal is already constrained by the river network structure. Aquatic insects, for instance, are generally limited to two primary modes of dispersal: downstream drift in the aquatic juvenile life stages and flight during the terrestrial winged adult stage. Yet the impacts of large hydropower dams can make rivers uninhabitable for incoming (drifting) juvenile insects, with remaining refugia found only in tributaries. The ability of adult aquatic insects to traverse such river stretches in search of suitable tributary habitat likely depends on factors such as species-specific dispersal ability and distance between tributaries. To explore the intersection of natural and human-induced habitat fragmentation on aquatic insect dispersal ability, we quantified population genetics of three taxa with varying dispersal abilities, a caddisfly (Hydropsychidae, Hydropsyche oslari), a mayfly (Baetidae: Fallceon quilleri), and a water strider (Veliidae: Rhagovelia distincta), throughout tributaries of the Colorado River in the Grand Canyon, Arizona, USA. Using 2bRAD reduced genome sequencing and landscape genetics analyses, we revealed a strong pattern of isolation by distance among mayfly populations. This contrasts with caddisfly and water strider populations, which were largely panmictic. Analysis of thousands of informative single nucleotide polymorphisms showed that realized dispersal ability may not be accurately predicted by species traits for these widespread species. Principal components analysis revealed a strong division between caddisfly populations upstream and downstream of Havasu Creek (279 km through the 390 km study reach), suggesting that the geography of the Grand Canyon imposes a dispersal barrier for this species. Our use of genetic tools in the Grand Canyon to understand population structure has enabled us to elucidate dispersal barriers for aquatic insects. Ultimately, these data may be useful in informing effective conservation management plans for understudied organisms of conservation interest.     

Twisted Crystalline Organic Semiconductor Photodetectors

Optoelectronic properties of anisotropic crystals vary with direction requiring that the orientation of molecular organic semiconductor crystals is controlled in optoelectronic device active layers to achieve optimal performance. Here, a generalizable strategy to introduce periodic variations in the out-of-plane orientations of 5,11-bis(triisopropylsilylethynyl)anthradithiophene (TIPS ADT) crystals is presented. TIPS ADT crystallized from the melt in the presence of 16 wt.% polyethylene (PE) forms banded spherulites of crystalline fibrils that twist in concert about the radial growth direction. These spherulites exhibit band-dependent light absorption, photoluminescence, and Raman scattering depending on the local orientation of crystals. Mueller matrix imaging reveals strong circular extinction (CE), with TIPS ADT banded spherulites exhibiting domains of positive or negative CE signal depending on the crystal twisting sense. Furthermore, orientation-dependent enhancement in charge injection and extraction in films of twisted TIPS ADT crystals compared to films of straight crystals is visualized in local conductive atomic force microscopy maps. This enhancement leads to 3.3- and 6.2-times larger photocurrents and external quantum efficiencies, respectively, in photodetectors comprising twisted crystals than those comprising straight crystals.